Having problems with your Mazda MX-3 ?

Instructions to replace water pump on 2000 Mazda Precidia

\015 Need instructions to replace water pump on 2000 Mazda Precidia\015
Posted / edited by AnonymousUser on : 15-01-2018

Answers :

1. Depressurize and drain the cooling system.\015\0122. Loosen the alterantor adjustment and remove the belt.\015\012
3. Remove the water pump pulley.
4. Remove all the timing belt covers.\015\012
5. Loosen the timing (camshaft) belt tensioner and slip the timing belt off the \015\012 camshaft toothed pulley (ensure you do not move the positon of the camshaft)\015\012
6. Unbolt the lower radiator hose fitting and heater retrun pipe.
7. Unbolt the waterpump from the block (5 bolts).\015\012
8. Remove all traces of the old gasket before mounting the new pump\015\012 (Permatex spray on gasket remover works well).\015\012
9. Install the new pump and reassemble in reverse order to above.
Repair Help & Product Troubleshooting for Mazda MX-3

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Instructions to replace water pump on 2000 Mazda Precidia


1. Depressurize and drain the cooling system.\015\0122. Loosen the alterantor adjustment and remove the belt.\015\0123. Remove the water pump pulley. 4. Remove all the timing belt covers.\015\0125. Loosen the timing (camshaft) belt ... Mazda MX-3

I have a well maintained 2004 Mazda 6 V6 with 131,000 miles. Water pump idler bearing froze and engine overheated briefly. I replaced the idler bearing assy and no more overheating problems. But now, after the engine warms it will fluctuate idle between 1400 RPM and 0. However it runs fine if not at idle or if the engine is cold. I can easily maintain a constant 1500RPM while setting still. What's wrong now?


Replace coolant temputer sensor ... 2004 Mazda 6

How much does it cost to have the Mazda 626 water pump replaced? (water pump + labour). And do you need to drain all the coolant liquid and have it replaced when you change the pump? Thank you!


... 1996 Mazda 626

I just recently changed the water pump on my 96 mazda 626 I did not change the timing belt due to it was replaced about 1 year ago. during the water pump change i did not mess with the timing belt at all. I got everything back together and the engine will rotate but not start. that was a month ago. since then i have replaced the distributor, crankshaft sensor, spark plugs and have also gone back twice and did complete removal of timing belt and made sure i didn't accidently move the belt any the


Since you have double checkedthe timing and checked the battery make sure you are getting a spark at the plugs and that you are getting fuel. Make sure all sensors are plugged in and are working. Check near the crankshaft (front) for a small sensor a ... 1996 Mazda 626

I need to replace my water pump myself and am having problems finding an instruction manual. I need instructions on how to change the water pump on my 2000 hyanda elantra


If I was faced with that issue I would go buy a used repair manual on ebay for about 10 bucks. if you can afford to buy gas for a vehicle, you can buy a manual. If you can't do that, every library has a reference section, and there is usually a MOTOR ... Hyundai Elantra

I have a 98 mazda protege and i have a leak comming from the radiator...it wont keep water. Every time i get in i have to put water in or else it will overheat. Bare with me...Im a female who knows how to drive and put gas in...thats about it...LOL. I have been told that its my water pump going out. So i am planning on replacing it. I was wondering if you had any suggestions for me for replacing it. I wont be the one doing it. My childs father will...But he has never fix one before. Its a new ca


If the water is leaking from the rad ' it has nothing to do with the pump.........Be sure not to overlook something that will cost you more money than you have to spend.......As far as price, well i guess it depends on where you live......The oil lea ... Mazda Protege

Where does the o-ring go on the water pump for a 91 mazda protege? Bought a new water pump to put in, no instructions---just the pump and 2 pieces and an o-ring.


The O-ring should fit into a groove on the back of the water pump or it's mating surface. ... 1991 Mazda Protege

I need instructions on installing a water pump for a 1998 jaguar xj8. Also how to replace a fuel pump? I keep getting the coolant light on even though it is full, and today I noticed vapor coming out of the fron? Does not that mean the water pump is not working?


They do fail\015\012plastic impellers snap off\015\012awkward job with rad in way ... 1998 Jaguar XJ8L

I have a friend thats going to replace my water pump in my '97 intrepid 3.5L engine. we need to know what web site to go to with a how to video. He's not sure where the water pump is. He's pretty good with cars i trust him to do the job, as long as he has instructions. thank you for your time. Tiffany Savage


Here is a site to go to to replace water pump on 97 dodge intrepid-- www.ehow.com/how_7690207_replace-pump-19 have a nice day !! ... 1997 Dodge Intrepid

Instructions on replacing water pump on 1998 Buick Century Custom , and illistration water pump froze up


... 1998 Buick Century

My 1993 Nissan Altima water pump is leaking. I need instruction on replacing the water pump.


You need to drain radiator, remove fan assembly, belt(s) and pulley then unbolt pump from the block. Make sure you have gasket sealer when you purchase waterpump for reassembly. ... 1993 Nissan Altima

Iam replacing water pump om 2002 mazda protege, will I have to remove the timing belt before I can get the water pump off?


YES, AND YOU SHOULD REPLACE THE TIMING BELT AT THE SAME TIME . ... 2002 Mazda Protege

Losing watger i have 92 mazda protege it was running hot,replace thermostrat still ran hot so took out.it loses water theres no leaks nhow.check water pump, hoses,where does water go.u have to put water in as water just goes when you drive it


You could also have a cracked or pitted head letting water into your cylinders .check to see if you are blowing water out of your exhaust if you rev slighty.this happenes if you do not use coolrant .straight water is not a good idea with aluminium he ... 1992 Mazda Protege

Instructions replace water pump


... 2004 Pontiac Vibe

Replacing a water pump 2005 mazda 3


... Mazda MAZDA3

Instructions for replacing 2005 Scion xb water pump.


It's pretty straightforward EXCEPT you must loosen the engine mount and jack the engine up about an inch to get enough clearance to get it out/in because the engine is about 1/4" too far to the passenger side. Just did my 04' and that was a hard to ... 2005 Scion xB

How to Replace water pump on 1991 BG Mazda Astina


... 1991 Mazda 323

Water pump replacement in a 2002 Mazda MPV


The reason is the water pump is driven off the timing belt, extra parts and allot more labor. No the eng does not have to be removed, labor time around 4 hours, parts about, about $125 US for parts, if it is a dealer add $75 US ... 2002 Mazda MPV

2006 Northstar V8 water pump replacment instructions


... 2006 Buick Lucerne

Do you have step by step instruction on how to replace a water pump on a 2002 Chrysler Sebring convertible?


REMOVAL - 2.7LNOTE: It is normal for the water pump to weep a small amount of coolant from the weep hole (black stain at weep passage). Do not replace the water pump if this condition exists. Replace the water pump if a heavy deposit or a ste ... 2002 Chrysler Sebring

2000 Saturn SL 1 I changed the coolant temperature sensor and the thermostat. 3 days later I replaced the water pump. I then replaced the radiator. relaced the water pump gasket. I then replaced the water pump and gasket again. The water light is still coming on? What do I do now. I was told the water pump was replaced in February 2010 and I was told in December 2010 that it had the original water pump from Saturn????? I am tired of being taken advantage of. Please help


May sound odd but try disconnecting the positive lead from your battery for about 60 seconds. Reconnect it then start your car. This should clear the error codes ... 2000 Saturn SL

I have a 1997 Saturn SL2. I have no heat. We have replaced the thermostat, the water pump and flushed the system. Still no heat! What's next..replacing the heater core or power flushing? If its replacing the heater core are there any FREE instructions how to do this on my Saturn?


It is your heater core, there is nothing else left. \015\012The heater housing is usually under the dash, and it must be removed to gain access to the heater core.Procedures for removing a dash, and heater core vary. But for the core: ... 1997 Saturn SL

Instruction to replace the water pump in a 3800 series II engine of a 97 grand prix


... 1997 Pontiac Grand Prix

1999 mazda millena 2.5L v6,need water pump replacement tech diag.


... 1999 Mazda Millenia

Replacing water pump on a 94 cutlas supreme instructions


REMOVAL & INSTALLATION\015\012\015\012CAUTION\015\012When draining the coolant, keep in mind that cats and dogs are attracted by ethylene glycol antifreeze, and are quite likely to drink any that is left in an uncove ... 1988 Oldsmobile Cutlass Supreme
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.1310 seconds