Having problems with your GMC K1500 ?

Water Pump Studs. Is the Dorman stud kit #23733 compatible with the late 1996 6.5 Turbo Diesel high volume water pump. This is the 4 stud set that mounts the fan/clutch assembly to the pump. ---------- Or, does anyone have the part number or dimensions of the studs?

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

No its not compatible.still to confirm it and to get exact compatible part number suitable for late 1996 6.5 Turbo Diesel .\015\012get the details from \015\012www.autozone.com\015\012get it confirmed from there and also they deal in parts.\015\012This will\015\012help. Thanks please keep\015\012updated.please do rate the solution positively .thank you for using fixya
Sorry, but not. In all the GMC K1500 Autoparts you can find just one type of this mounting hardware:
- Dorman Water_Pump_Bolt
- Dorman Water_Pump_Mounting

Applications: Click Here to Verify Vehicle Option Specs Cadillac, \015\012Chevrolet, GMC, Isuzu, Oldsmobile, Workhorse Features * OEM#: 11570082; \015\01212552096\015\012
d9ac859.jpg

Anyone case refer the Dorman Stud 23733 like compatible; maybe its possible, but with certain adaptative.

Hope help with this.
Repair Help & Product Troubleshooting for GMC K1500

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Water Pump Studs. Is the Dorman stud kit #23733 compatible with the late 1996 6.5 Turbo Diesel high volume water pump. This is the 4 stud set that mounts the fan/clutch assembly to the pump. ---------- Or, does anyone have the part number or dimensions of the studs?


No its not compatible.still to confirm it and to get exact compatible part number suitable for late 1996 6.5 Turbo Diesel .\015\012get the details from \015\012www.autozone.com\015\012get it confirmed fro ... GMC K1500

Instillation of bracket idler also known as fan pulley bracket of 1991 toyota 3VZE motor.Part is bracket sub assembly OEM part #16307-65020. I removed the part after I changed my water pump and timing belt. I ran the truck when the pulley on this assembly froze I removed the part dis assembling the radiator, fan, timing belt cover and loosened the belts and such. I went to toyota and found that the part cost almost a $1000. I tried 3 different after market products but the bolts never matched u


... 1991 Toyota Pickup

Instillation of bracket idler also known as fan pulley bracket of 1991 toyota 3VZE motor.Part is bracket sub assembly OEM part #16307-65020. I removed the part after I changed my water pump and timing belt. I ran the truck when the pulley on this assembly froze I removed the part dis assembling the radiator, fan, timing belt cover and loosened the belts and such. I went to toyota and found that the part cost almost a $1000. I tried 3 different after market products but the bolts never matched u


Due to the age of this truck no diagrams are avial anymore, I can direct you to a used factory repair manual however, this will have all the information you need and is a valuable resource for any future problems u need to fix, it is a CDROM copy of ... 1991 Toyota 4Runner

I rebuilt a Z24 motor and had a shop assemble the long block. I installed all brand new parts, oil pump, water pump, cap and rotor, spark plugs, wires, clutch, headers and a cam which was regrinded by Schneider, I'm having problems with the timing. I can't get the motor to idle. I used the stock carb and got it to idle but once you press the gas, the truck won't idle again. I drove it but only went 65mph. I changed the carb to a 32/36 and still can't get it to idle. Mind you this motor was opera


Since you put a different cam in it youll have to find the deg. that it times on ... 1984 Nissan Pickup

1996 GMC 6.5 Diesel Waterpump Please tell me I'm not insane. It appears that in order to replace the waterpump I must remove the entire Alt/Tensioner/Air Pump Assembly. That bracket is over and shares the bottom right stud holding the water pump in place. I have located 3 bolts/studs serving the multi unit bracket but am stumped to find what else is holding in place.


IN ORDER TO REMOVE WATER PUMP YOU MUST REMOVE FAN AND FAN SHROUD.REMOVE AIR CONDITIONER HOSE BRACKET AND THE OIL FILLER TUBE YOU HAVE TO REMOVE VACUUM PUMP MOUNTING BRACKET NUTS THEN REMOVE THE BOLT HOLDING THE PUMP AND ALTERNATOR.REMOVE THE VACUUM P ... GMC K1500

Leaking coolant I got a 94 mustang gt, i just replaced the water pump last month and now its leaking coolant from behind the water pump. It looks like its the part thats bolt onto the block and the water pump bolts onto. I'm trying to find out what that part is called so i can find a replacement part.


I believe this part you are referring to is the intake manifold. it seems to be a big problem with the older ford mustangs. make sure before you spend the big bucks on it that it's not just the water pump gasket. ... 1994 Ford Mustang

I have a water leak on my 96 camaro. It has a 3.8 v6 engine. The water is leaking, not from the water pump itself but from behind the part the water pump mounts on. Not immediately behind the water pump but offset to the passenger side. All my hoses are intact but I'm honestly not even sure what that part is called. Help!


It is your Lower Imtake Manifold gasket (LIM). Late Production Camaros and Firebirds used Dex-Cool coolant which nortoriously caused the LMI to actually disintegrate. The failure of the LIM allows coolant to leak to the exterior of the engine as well ... 1996 Chevrolet Camaro

Hi there, I am hoping you can help me. I am looking for what I believe to be called the "water inlet housing or the Water Pump Outlet Housing", for the following vehicle. What is the part name? I can send you a picture of the part if needed. Year: 1993 Make: Oldsmobile Model: Cutlass Supreme S VIN #: 1G3WH51X7PD368447 Engine: 3.4L Twin Dual Cam V6 Part needed: I believe it is called the "water inlet housing or the Water Pump Outlet Housing". Important Note: It is not the thermo


... 1993 Oldsmobile Cutlass Supreme

1995 MERCURY SABLE 3.8L WATER PUMP INLET TUBE OR LOWER RADIATOR TUBE LEAKING ....DEALER SAY'S THEY DON'T MAKE PART ANYMORE... NEED ONE CALLED LOWER RADIATOR HOSE AND TUBE ASSEMBLY


... Mercury Sable

Tension pully broke off is it part of the water pump assembly need to see diagram


... 1997 Buick Park Avenue

The connecting pipe part number 19962 on my 97 honda civic DX has a crack in it. is this something that reasonable to fix on my own? and how exactly do the two connecting ends(one into the water pump) the other into the thermostat housing assembly, connect? screw? clamp? etc...


They use rubber O ring seals. ... Honda Civic

Hello there Ive been trying to figure out why my 2000 Cadillac Deville has been over heating,and Ive received so much help and Ive tried to replace numerous parts so far and nothing has seemed to work.I was downstairs examining my car and I noticed two metal lines that run across the top of my engine to over by the water pump assembly, and one is connected to a little hose that is connected to the reservoir, and the other one has the letter AT on it, and is connected to a little hose going down


Hello again. I spoke with you yesterday about this vehicle. I hope I can help you some today. It sounds like you are looking at the Automatic Transmission cooler line. If is it leaking coolant this could very well be the source of your problem. If it ... Cadillac DeVille

Water pump hey dr. i'm changing my water pump and can't get the pump off past the studs. finaly got all the nuts and bolts off, In and out water hoses, Alternater, idler wheele for serpentine belt. do i need to pull the engine or extract the studs(4). signed B (broke down)


No need to pull the engine off. if you ar sure that there are no more bolts holding the water pump, tap it lightly with a hammer in the separation position . it is just stuck with the gasket. im sure it will come off the engine.\015\012\0 ... 1999 Ford Windstar

Waterpump I have these threads that com out of the pulley from the water pump that attach to the fan.Well i replaced the water pump, but the new one didn't have those threads. Went back to the part store and ask them for the threads and to look at another pump. Non of the pumps had the threads. So my question is how do i get them off the old pump or where can i purchases them because the part store did not have them?


The easiest thing to do would be to measure the length of the studs in the old pump including the thickness of the flange,and take one of the old nuts back to the parts store. Get bolts the same length and sized to fit the nut. Use these instead. Mak ... 1998 Jeep Cherokee

1996 Suburban K1500 6.5 Diesel Upgrade water pump. What parts are required to upgrade my truck to the later hi volume water pump and dual thermostat housing? Can I do this with just the pump, housing and hose, or are there other issues or parts involved? Bolt on or fabrication involved?


Its not that easy to upgrade the water pump and thermostat housing just with the pump, housing and hose. and yes there is a bolt involved in the kit.\015\012but you require proper schematics to do this upgrade.which you can get onl ... 1996 GMC Suburban

I have a 97 chevrolet lumina and i thought the water pump was leaking. i changed the water pump and it still leaks. noticing a drip of water at the bottom of a bolt that is part of the water pump housing. still have not started car. what to do?


There might be a hair line crack in the housing. Take water pump back off and look very closely at housing. ... 1997 Chevrolet Lumina

I had 90000 service performed. At 98000 miles I hear a gurgling sound, like the system needs to be burped. Car seemed to be driving normally otherwise. Not overheating. I bring it to the dealer to look it over and.... Here's the estimate on the Highlander Parts: Head Gasket Set............254.92 Water Pump..................175.34 Misc parts wash, bolts, 50.00 Labor to install Head Gasket and re-tool block retain bolts 15.0 hours @ $159.95.....2399.25 Labor to install water pump 3.0 hours @ $159.


Well you tax is cheap thats for sure ,its 17% here in spain .Try bleeding the cooling system a bit and see if that cures it ,could just be an air lock ... 2003 Toyota Highlander

I am replacing a water pump on a 1999 dodge durango, 318 ci, 5.2 litre engine. i am already encountering problems, i started removing the water pump assembly, removed all the bolts, the whole things is loose. i did this in the rain. after i was done i noticed i have 2 different sized bolts, and completely forgot where the bolt go in what holes. next, how, with the assembly loose, do i get it out of the motor bay, still attached to the fan and fan clutch. i think might of got ahead of myself


Ur supposed to unscrew the fan at that big nut and remave the cooling fan shroud first then youll have all kinds of room. snug the pump back to the motor and break that nut loose. i always use an air hammer and chisel in the left of the top flat on ... 1999 Dodge Durango

I have a cracked Water Pump Housing for an 87 Chevy Nova. This is the Housing that the water pump fits onto and then the housing attaches to the block and a pipe that leads to the thermostat. This is not a part that is in stock or available every where I have looked so far. The Engine is the same as a Toyota Corrola same year so I could go to a salvage yard but it is a real pain to take off all the stuff to get to it and I wouldn't know if it was a good part until I was a few hours in to it.


I found a website that sells the pump with housing for the 1987 Toyota Corolla. It is: bestsourceautoparts.com. They list the part for abut $50, same day shipping. I'll see what I can find for the Nova. ... 1987 Chevrolet Nova

I suspect the water pump needs replacement, since there is liquid like fluid below engine. what are the steps one must take, to replace the water pump. Why is it not simple to do? Looks like alot of parts have to be removed first, just to get to the water pump. Tony


1.3L & 1.6L Engines\015\012\015\012\015\012Remove the timing belt cover, timing belt, tensioner, plate and spring.\015\012\015\012Remove the water pump mounting bolts.\015\012 ... 1991 Suzuki Sidekick

Water leaking behind the cover. Is the problem the water pump? 1995 Intrepid 3.5. Loses anti freeze gradually, but noticed today all the anti was out. Added, started the car and saw anti freeze running out consistently. I have some experience working on this engine, but never tackled the water pump. What do you recommend as far as what to replace other than the pump, thermie, and other general parts and fluid? The engine has 287k miles and runs pretty darn good, in my opinion. Timing belt? Wha


According to what you said, it is likely that this water pump announcing certain problems. Some of them could be wear on seals (O-ring). This inspection and no work is more complication, ... 1995 Dodge Intrepid

Install new motor in 91 jeep 4.0L all new parts (water pump ,rad, hoses, plugs... ran fine going down hill started to over heat.. when to a shop and they check thermostat. seem ok replace and drove home still over heating at lower rpms. he thinks it might be the water pump .turning the wrong way.do they make a rev.rotation water pump for a 4.0L


You probably have an air lock. Remove a heater hose and get all the air out. Then run it with the rad cap off until it warms up. You should see the water level drop when it finally goes, or if you got the air out with the heater hose, it should be ok ... 1991 Jeep Cherokee Limited

JUST CHANGED WATER PUMP, POWER STEERING PUMP, BELT TENSION ASSEMBLY. EVERYTHING OK FOR ABOUT 2 WEEKS AND NOW THERE IS A KNOCK OR RATTLE COMING FROM THE FRONT OF ENGINE. WHEN BELT IS REMOVED THE NOISE GOES AWAY. CHANGED WATER PUMP AGAIN TO MAKE SURE WE DIDN'T HAVE A BAD PUMP. NOISE STILL THERE. WHEN LOOKING AT THE DAMPER PULLEY, IT APPEARS TO HAVE A SLIGHT WOBBLE AND WHEN BELT IS REMOVED IT SMOOTH OUT AND NOISE GOES AWAY? THE RATTLE IS LOUDEST WHEN STARTING OR WHEN YOU SHUT OFF THE ENGINE.


The damper could be bad if it's the type with the rubber inbetween the pully and the the rest of the damper. check that and see if it is separated. if not looks like your crankshaft bearings could be bad ... 1995 Oldsmobile Silhouette

My car is leaking water above the water pump which seems to be a plastic like part and runs around as if it's going into a tention pully. It's located above the water pump. 2006 grand prix, it runs hot with in 10 minutes of driving and it has water


... 2006 Pontiac Grand Prix

I am having an issue with removing the clutch assembly from the water pump on a 19994 Jeep Grand Cherokee 5.2L V8. I have removed the pump assembly from the vehical, but how do I keep the 1-1/2 nut from turning on the shaft, when there appears to be nothing to grab onto except the impellar itself? The pump seal failed, so the pump will be replaced, I just dont know if holding the impeller is the normal way of removing this nut.


There is a thing called a strap wrench. Hardware stores have them and maybe the auto parts stores. The strap wrench will keep the pulley from turning while you loosen the nut. Be sure to use p ... 1994 Jeep Grand Cherokee
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.7963 seconds