Having problems with your GMC C1500 ?

I HAVE HEADLIGHT PROBLEMS.I HAVE A 1986 GMC PICK UP WITH A PLOW. THE TRUCK HAS A TOGGLE SWICH TO CHANGE THE HEADLIGHTS FROM THE TRUCK TO THE PLOW. ONE WIRE GOING TO THE TOGGLE IS MELTING. IS THERE A DIAGRAM TO SHOW ME HOW IT SHOULD BE WIRED?

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for GMC C1500

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I HAVE HEADLIGHT PROBLEMS.I HAVE A 1986 GMC PICK UP WITH A PLOW. THE TRUCK HAS A TOGGLE SWICH TO CHANGE THE HEADLIGHTS FROM THE TRUCK TO THE PLOW. ONE WIRE GOING TO THE TOGGLE IS MELTING. IS THERE A DIAGRAM TO SHOW ME HOW IT SHOULD BE WIRED?


... GMC C1500

I have a 1994 Toyota pickup with a V6. The truck is intermittently not starting the battery is fairly new and when the truck does start it starts really well at this point I am thinking bad electrical connection. I started tracing all of the wires from the battery to the starter and found a loose connection on the bottom of the starter. This wire was also melted from being to close to the exhaust manifold. I removed the wire and I am going to replace it and the others in the bundle. To start the


... 1994 Toyota Pickup

Fiher mm2 plow won't turn l or r. it will go up & down. when i move toggle to turn plow L the plow raises. can't see any breaks in the wiring & i put dielectric grease on connectors. i checked reservior & fluid came flowing out of fill hole. i know it was not over filled & was told by dealer the pistons were self bleeding. any ideas - thanks


... Dodge Ram 1500

No Spark there are some wires melted, and I am not sure where they need to go or if they are needed at all. What I would like to have is a simple wiring diagram for the electronic ignition for the truck, I can run new wires to distributer, starter, and ignition switch etc.


Look on net ... 1979 Chevrolet C/K 3500

Can any one help i have the old cable western plow it s sposed to turn side to side an go up an down with the handle in my truck i can jump my wires to get it up but i just got a new handel it should work any one have a wire diagram


I dont have a diagram but make sure you have a good ground thats what it sounds like to me, let me know ... 1996 Ford F250 Crew Cab

I have a diamond snow plow about 10 years old. It has the E 60 motor on a 71/2 foot plow. I put it on the truck everything worked fine. I clean the main wiring harness and put *** grease in the harness. Now it doesn't work. the solenoid functions but the blade don't go up or down, side to side. The remote will power the solenoid but nothing happens. Any ideas?


E 60 snow plow we try to move it up an down to the left it goes to right any where you try to move it ... GMC K1500

Boss plow toggle switch wiring diagram - Cars & Trucks


... Cars & Trucks

Wires going to starter solinoid. 2 go into 1. is that a resistor or just a connection ? looks factory. appears to be 2 10 ga. going in and 1 12 or 14 ga. comming out . there are 5 wires going to the solinoid including the battery wire.(6 if you count the small wire at the other post.)but the large post at the top is what i'm dealing with.the wires shorted on the metal tube they run thru , and melted. so far i have been replacing them with 10 ga. wire individually. bob


They are connections but are special fuse links!, desighnd to burn out before your wireing O.K.? ... GMC Jimmy

Hit brakes and back up lighs come on, just rewired truck and boat wires from the wires that were there. truck had blue and darker green wire connected at truck (not going to 4 wire connecter)


These vehicle have all tail light in circuit to the rear lights. You must purchase and install a trailer light conversion kit from a local parts store, not hard wired in anymore. The converter will plug in at the rear taillight harness at the frame a ... Chevrolet Blazer

Yes i have a 99 bmw z3 coupe will not start been 2 the bmw dealer they replaced the computer but stil couldnt fix the problem, it started with i let car sit up for a month covered , went too go start it was dead tried jumping it with a jumpbox no go my truck no go ended up replacing the battery then it turns over but wil not start smoke arises from the hood where computer is a single brown wire is burned up going too a cluster of brown wires all tied together but only one of them burned up the c


Hi,i have bmw z3 coupe 1999,2,8.i was having same problemes,and it` cost me money by mecanic by geusing(starter,altermateur) like 1200$,belive me the probleme was the battery, get a new battery,and make sure the+ i mean the red line in the battery is ... 2002 BMW Z3

Wiring Problems? I have been having on going problems with my blazer. Took it to the garage and was told that the security fired the wiring to the fuse box and the neutrual position sensor. They fixed that problem, my truck ran great for a couple of weeks and then quit again. Now I've been having problems with it starting again. I have to start the truck with a live wire to actually get it started. I was told that the wiring harness in the steering column could be bad. Took apart the dash and th


If the chopped and taped wiring was done by the shop that worked on it, and it worked after they were finished, It's likely that they did the right job (short of replacing the entire harness) but may have done a sloppy job, resulting in your present ... 1999 Chevrolet Blazer

MY ELECTRIC WINDOWS DO NOT WORK, THIS TRUCK HAS BEEN SITTING FOR TWO YEARS. THERE IS A BLACK WIRE WITH A WHITE STRIPE GOING TO THE SWITCHES ON DRIVERS SIDE. IF I GROUND THIS WIRE THE WINDOW WILL OPERATE. I DO NOT HAVE WIREING DIAGRAM FOR THIS TRUCK. ANY IDEA WHERE THIS BLACK WIRE WITH WHITE STRIP GOES. THANKS RON


Just ground it to bare metal, you'll be fine ... 1988 Chevrolet C1500

Rear lights dont turn on when i turn on my lights but if i push the breaks they go on. i checked the bulbs and there good. and i have 2 white wires and a brown wire and 2 green wires and a yellow wire hangging from the back, bottom of my truck. everything works and turns on is just that the rear lights dont go on when i turn on my night driving lights.


What do you mean "wires hanging" that should be the first thing you check. fuses good? ... 1995 Chevrolet Blazer

Change battery on 1997 dodge 1500 pickup. now the engine just cranks without starting. the vehicle had an after market kill switch added. i removed the kill switch but i still have a few wires that i do not know were they go. one wire is yellow and red. another is blue and yellow. plus there are to wire one red and the other is black. these to wire go to a red light on the dash. i need help rewiring this truck so that it will start. thankyou.


Can you get any name, model etc, off of the switch that you took out? ... Dodge Ram Pickup 1500

Need a wiring diagram for the waring harness on the inside of the truck on the inside of glove box, theres 10 wires need to know where they go, wires go straight to engine


Get a haynes manual it has the wiring diagrams in the back. ... 1993 Chevrolet C3500

I just finished rebuilding my truck engine and will like to test it before installing back in the truck. I know how to get the starter going, but I don't know how to wire the coil, distributor, alternator etc. It is a 1971 360 engine 5.9l . The engine is already set up completely with the alternator and radiator. I just don't know if I just put the positive wire from the battery to the positive on the coil. Or a wire from alternator to the coil???, any help is welcome. thanks


To start the engine you need a+ feed from the battery to the + side of the coil[this acts as an ignition live,to be disconnected when not testing the engine ]Next you need a heavy + feed directly from the starter to the battery[use good heavy cable]A ... Ford F-100

My 1999 Silverado has a dealer towing package installed but not the brake control. The truck wiring recepticle has the blue wire running into the wiring harness going to the front of the truck. Any idea where I can find the other end?


Hello af4lb.Usually you will find this wire taped up to a harness just behind the underhood fuse panel.Follow the large harness up from where it goes to the rear under body and it should break out of the harness there. You may have ... 1999 Chevrolet Silverado 1500

Hey guys, Okay I have a 96 seville sts that stopped running on me while driving. It smelled like burnt wiring so I popped the hood and noticed that it melted a relay under the hood. It was a relay harness with an orange wire. I traced the wire all the way back to the trunk. It was melted clear back to the trunk. Now I have no power to everything except the door locks power seats truck release, and the center console blower motor. What do you think it could be? I know I have to change the body h


I dont beleive u need anything reprogramed but u do need to figure out what caused it to melt in the first place ... 1996 Cadillac Seville CA Value

Truck dies A few weeks ago, I was driving home when all of a sudden the truck died, no warning, just shut off. Then I couldn't start it for an hour or so. So I had it towed home. Now when I go out and start it, it runs fine until it warms up. Then it just dies instantly. When I go to restart it, it won't start. I'll go back an hour or so later and it will start, warm up then die. Can you help me? I have replaced the plugs, wires, distributor, brain, basically everything.


TRY CHANGING IGNITION COIL ... 1989 Dodge Raider

My radio in my truck has soped working and I need to install a new radio. However I do not know which wires go to what speakers etc. Can you help me identify which color wires represent the speakers they go to and all the color wires needed to hook up a new radio.


I always would go to bestbuy or walmart to get a harness adapter kit and the radio bezel installation kit to install an aftermarket radio. Just plug it in, and the wires are all labeled for speakers, antenna, power, etc. ... 1996 Chevrolet Cavalier

I have a melted wire coming from the back plug on my headlight switch . green and white wire. i also have 3 melted wires going to my trunck lid . from my lr tail light . dont know what to do . can u help ?


The problem is a short to ground in your running lights circuit. From your description, it seems likely that the short is somewhere in the wiring to your lr tail light. You need to replace those wires all the way from the tail light to the switch, ... 1992 Volkswagen Cabriolet

No lights on plow, Bulbs are good!! When I turn on lights, high beam indacator comes on. If plow is unpluged, truck lights on, just fine, then when plug into plow, lights on truck go out as th


Check your grounds on the plow wiring,disconnect and reconnect the battery if the tipm reads too high a draw it will shut them down to protect the circut.Battery disconnect resets the tipm. ... 2001 Dodge Ram 2500 Truck

1987 Nissan Pickup Truck Will not start it will crank. So i Did Tune up With wires spark plugs I Don't know the order of last 2 wires that go in center of dist cap. Please help and will this solve thi


I'll send you 2 pictures, 1 will be your engine. I picture in each post. ... 1986 Nissan Pickup 4WD 1986

Second wire in engine compartment fuse box melted? where does wire go?


Secondary ground wire fried!!? this tells me that your main ground did lose its contact somewhere.usually opposite the battery side. when this happens, and you try to say, start the car, all that amperage will follow any available ground it can find, ... 2005 Seat Alhambra 1.9

I have a 94 gmc sierra 4x4 6.5l turbo diesel. i have feul problems replaced pmd, injector pump, lift pump, crank pos. sensor, checked connections and wires. still no feul press. leaving injector. The injector is good, thinking might be a sensor just dont know where to go form here. problem started when i tried to pass a truck on highway. Had cruise control on. When i let go of thottle it excellerated on its own for a few seconds then shut itself off. Tried to start it a few times truck would sta


... 1993 GMC Sierra K2500
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.8207 seconds