Having problems with your Ford Fusion ?

New ford g6e tyre noise

\015 Varying amounts of tyre noise. No problem on smooth asphalt roads but loud rumbling and hum on chip surfaces. car is new and has only done 150 km. tyres are Dunlop low profile 245 wide on 18 inch mag rims.\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for Ford Fusion

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

New ford g6e tyre noise


... Ford Fusion

I HAVE A NOISE COMING FROM THE REAR OF A s40 VOLVO SOUNDS LIKE THE ENGINE ON A PUTT PUTT BOAT(SORRY THATS AS CLOSE AS i CAN GET) DEALER SAYS PIRELLI TYRES ARE RUBBISH AND THEY ARE MAKING THE NOISE ,i THINK HE THINKS i AM STUPID.i HAVE SECOND SET OF NEW TYRES ON FRONT BECAUSE OF SERIOUS SCRUBBING OUT OF TYRES EDGE(ONLY 32,000 ON CLOCk)MACHINED DISCS NEW BRAKE PADS AND STILL THE ROTATING PUTT PUTT NOISE AND OBVIOUSLY GETS VERY NOTICABLE AT HIGH SPEED. ANY SUGGESTIONS THANKS


With the car parked, rub your hand over the treads of your tire...unusually bumpy? compare to the fronts... if a tire is out of balance, esp. in the rear, it can make alot of noise... solution is to replace tire and rebalance ... 2006 Volvo S40

My 1998 Ford Explorer started making a chirping noise. Took to the mechanic and he just started throwing parts at it. Now I have a new water pump, new pulleys, and new serpentine belt, and still have the chirping noise. It is not constant and is usually when it is cold; however, it seems to be getting more frequent.


Did he happend to chk. the u-joints? just a thought, does it sound like its comming from under the hood? Sound does travel. ... 2002 Ford Explorer

My Ford Econovan, has started making a crank/knocking noise ever since last night. I use my van every day, as a courier driver. I can't afford a new engine to be put or to buy a new van. Please help m


Sounds like something loose and vibrating near the fan ..check the shroud (fan) ... Cars & Trucks

I have a 2002 Ford Super duty 250 4-wheel drive. One of the spark plugs came out and it almost looks like something was hitting the end of it. The truck was running fine till the plug came out,no noise or tapping sounds. I just tried to put a new plug in it and it seems there are no threads in the head.I hade the truck towed to the Ford dealer and they want to sell me a new engine at the tune of 7,000 What can I do to fix this problem? The dealer wont just replace on head they want to do both an


Drill out the spark plug hole, tap it, and put in a heli-coil. I had a 2001 F-250 that did just what you described. The ford dealer will probably not do it because you are not supposed to do it to the aluminum head, but I bet a shadetree mechanic w ... 2002 Ford F250 Super Duty SuperCab

I HAVE A 2003 FORD EXPLOYER EDDIE BAUER 4X4 AND IN THE LEFT FRONT WHEEL THERE IS A GRINDING NOISE. NOW I HAVE REPLACE THE ROTORS AND PADS AND ALSO THE LEFT FRONT CALIPER . THE NOISE IS STILL THERE . WHAT COULD BE WRONG ? THE NEW ROTOR HAS A HALF INCH GROVE IN IT AND THIS WAS ONLY DRIVING IT ONLY 20 MILES. IT DOES HAVE ABS BRAKES ON IT. CAN YOU TELL ME WHAT'S WRONG.SOMEONE TOLD ME THAT MAYBE THE BRAKE HOSE IS BAD AND IT IS COLLAPES THE NEW CALIPER ? IS THIS TRUE.FOR I JUST DON'T TO KEEP SPENDI


If you look at each brake pad you will see a difference between the outer and inner pad. The outer pad has a metal squealer part that sticks away from the pad material. Each squealer is intended to rub the Rotor when the material on the pad is worn ... 2003 Ford Explorer

I have a 98 ford windstar that dosent start, new battery, used starter and new battery terminals so what else could be the problem? It use to make a click noise and now theres no click noise


The click noise is better than no noise, maybe you need new connector wires. or the battery terminal clamps are not tight enough. ... 1998 Ford Windstar

I have a Ford Ranger XLT 3 liter six. Why do I have "Starter" persistent problems? I just had my sixth starter replaced. The oil filter oil shield over the starter was removed by Jiffy-Lube when truck was new..they said it wasn't needed. Is oil getting into my starter when the oil filter is removed? Also with a replacement Ford Starter installed...a noticeable whinedown noise is present for a second after starting. Is that noise normal?


... Ford Ranger

By kingsprospec on Aug 03, 2010" " Hi my car is a ford fiesta 1.4 zeteck I went down a pot hole in december and it buckled my whheels. It worked out cheaper to buy a whole new set of alloys. I bought my new alloys and they was fitted with brand new tyres and tracking and balancing. I have had nothing but problems with them since with vibrations through the steering wheel. I have had them exchanged for a complete new set and tracking and balancing done again to be sure it's all correct. The probl


It sounds like some of the steering components are bent, also check the camber. ... 2006 Ford F-150

Whistling noise I have a 2004 f-150 supercab. problem began when truck was new and I was driving at approx. 72 mph in cold weather. I would get a loud persistent whistling noise. Reported to dealer but they could not duplicate[conditions were wrong]. Also called Ford complaint dept.Talked to dealer again this winter and they may have attempted something as now noise may occur at varying speeds in cold weather.Ford is now saying this is deemed normal and acceptable.It is not! Any solutions?


Have you tried placing something over the grille area temporarily, to try & isolate it. Can you tell roughly the area it's coming from? ... 2004 Ford F150

1995 Ford Bronco 4x4. Has howl (metal on metal noise) in left front hub area. I have pulled hubs apart and checked bearings, they looked good, but were loose and the grease was thin like liquid. I cleaned hubs, filled with new grease, repacked wheel bearings, and put all back together and still makes the same noise. i used wd40 to spray on back side of hub where the axle shaft goes though into the hub, thinking it was dry and making noise, but still no change. removed auto locking hub and drove


A howl usually is a bad bearing ... Ford Bronco

Grumbling Noise Recently changed tires on my 2000 Ford Expedition. put 2 new Uniroyals tires on rear and (2) 80% tread goodyears on front. The vehicle started make grumbling noise on drivers side like its trying to catch up. . Later learned the 80% tires had flat spots. Could this be causing the noise . took to mechanic not the transfer case. Any help Appreciated


Yes it could cause the noise also having 80% tread is not good on the transfer case as it will constantly be putting stress on it. replace your fronts with matching tires and the noise should go away ... 2000 Ford Expedition

I have a 2004 Ford Explorer 4x4 making a loud grinding noise almost like metal grinding and sometimes can hear a noise almost like its rubbing the tire coming from the rear of the SUV it's audible on the inside and the outside of the vehicle there's no fluid leak or Shutter when driving just a lot of very loud noise, it pulls at times when trying to make a U turn it jerked the wheel enough to startle me any idea of what this could be I know I need new pads and rotors could this be the issue?


... Cars & Trucks

Have a droining noise from the front of my astra van had two new tyres fitted today still making the same noise


... Cars & Trucks

I am hearing a noise that rattles when I have my door open, it sounds like its coming from the exhast. When I lift the hood and listen to the motor running it just runs smooth. I am just no sure what it could be. Noisy lifters or? I changed the oil and put in a new pvc valve. A friend of mind checked the engine codes and he said that there are no hidden codes and that part seem alright. I was told bt others that my noise is common in fords. Could you give me some suggestions. Thanks, Bill Bu


Check your catalytic convertor, these have a ceramic monolith inside which degrades and becomes loose in the housing, easily checked ! with the engine off, get underneath and hit the cat with your hand ( be sure its cold, the cat not your hand !!) if ... 1994 Ford Ranger Supercab

Brakes 1997 Ford Explorer. Just had new rotors and pads. When braking, especially at low speeds, there is a grinding noise, and it then appears that the brakes stick. Returned it to mechanic who checked out everything without detecting a problem. Was told that the ABS system would have to "re-learn" the braking pattern, and the problem would go away. It hasn't, and brakes seem to be dragging. I just replaced the rotors, pads, and bearings on my 1999 ford explorer Sport.  It was a relatively eas


You may have to take the rotors back off completely and look for the baby brake shoes behind the rotors because sometimes they will hang up and give you some of the problems you are having ... 2001 Ford Explorer Sport

2004 FORD EXPLORER parked it, 3 hrs later , won't start, won't crank installed new battery- no change installed ne pats transceiver - no change lights come on alternator makes noise when turned on other noise maybe bypass switch battery drain fast when turned on need key codes to try.


You are right.Its the key code problem.\015\012As per the manual it says:--- sometimes when the battery is disconnected or has to be recharged - this happens. The computer forgets the key code and the key has to be re-coded. The ford service c ... 2004 Ford Explorer

Have a rumble at about 90-110 klm.done propshaft,axle bearings,new tyres rims,new gearbox oil seal &bush. when in netral at that speed noise dissapears. Could it be a worn diff or gearbox. gear change is still smooth.More than 110 klm its smooth. van has done 136 000 klm and has full service history. HELP this is costing me now , i might as well have sold it and got a later model


... 1997 Nissan Pickup

2002 Superduty Ford F-250 4x4. Had auto locking hubs, changed to manual Warn Hubs, but only lasted for 4 lock-in/lockouts and the the right hub will no longer engage. The mecnhcanic could not fix the problem, so he put on my second new set of Warn hubs, worked for 3 lockin/lockouts and the right front hub will not lock back in. this last time it made a grinding noise until I turned the hub to Lock and then back the "Free" where the noise went away. This condition only happens on the passange


... 2008 Ford F 250 Super Duty 4WD

2006 Ford Taurus-35K miles. When engine is cold, loud pop occurs when putting into gear (D & R). Sounds like frame flex or strut housing shift from engine torque? Also, whine at rear when rolling at higher speeds. Previous tires and new ones make no difference. At low speeds, struts in rear are noisy when going over jagged bumps in road. Dealer claims all noises are normal and can't claim to duplicate "pop" noise, but, of course, it did it for me immediately upon picking it up.


-Check for loose bolts at drive plate (flywheel)-Check for all motor and transmission mount. It could be loose.Mai ... Ford Taurus

I've got a 116i 56 plate with what i can best describe as ''a worn wiper blade going across a windscreen'' noise when coming to a full stop when braking (not slowing down). The car has full servive history. The dealership suggested new tyres, having got these the noise is still there, any ideas?


I would think it's a break pad problem, perhaps dusty and near end of life. Check the thickness by removing the front wheel and looking at the pads, should be 3mm or more in thickness(not counting the metal backplate) any less then change as soon as ... 2008 BMW 1 Series

Have 97 ford f-150 4x4 was running fine shut truck off next time went to start just made clicking noise replaced starter with new one & makes same noise please help


You need to check the grond cable for assed resdo on it or check solenod ... 1997 Ford F150 Regular Cab

No heat 86 ford exp limited edition NO heat; new thermostat. not making any noises; chd hoses chd core; HELP!! What else can it be I've got no heat. The thermostat' s new, the heater core is fine. I was told it was a heater box?? Not sure if this is the control valve, blend box or what?


HEATER CONTROL VALVE IS NEXT.ARE YOU SURE THE ANTI FREEZE IS UP TO LEVEL WHEN THE TRUCK IS WARM. ... 1998 Ford F150 Regular Cab

My 4.9L f150 makes an exaggerated blowing noise when I accelerate.It almost sounds like the blower on a diesel engine. What's making the noise, and how do I fix it? I love my truck, but I'm new to Fords. please help.


The blowing noise is coming from the fan clutch, best way to diagnose is to remove drive belt and start engine (only for a very short time) if noise goes away , replace fan clutch and retest. ... Ford F-150

1996 AWD Ford Explorer wheels locked up while driving. No noise no indication, took a left and the car jerked as if the brake was stuck on. The entire front end is all brand new ball joints new also. Car won't move but if it's in neutral I can push it fine. Tranny shifts fine. Maybe the transfer case? Can a u-joint freeze?


Hi it sounds like brakes when you drive do your wheels get hot if so i think your brake cylinder is sticking ... Ford Explorer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.2950 seconds