Having problems with your Ford F-350 ?

Can the VIN no. of my 2000 Ford f350sd 4x4 tell me if the tranny is the 4R100? Im not sure and can't look at the bolts on the pan since Im not where the truck is.? If U can help me here's the VIN-1FTSW31F8YED52933. iT HAS 7.3 LTR, and is automatic.

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

The VIN doesn't tell what the transmission is, it does the engine. But it is a 4R100, there are 2 different filter kits though, 1 for a deep pan and 1 for a shallow pan, both have 20 bolts.
Repair Help & Product Troubleshooting for Ford F-350

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can the VIN no. of my 2000 Ford f350sd 4x4 tell me if the tranny is the 4R100? Im not sure and can't look at the bolts on the pan since Im not where the truck is.? If U can help me here's the VIN-1FTSW31F8YED52933. iT HAS 7.3 LTR, and is automatic.


The VIN doesn't tell what the transmission is, it does the engine. But it is a 4R100, there are 2 different filter kits though, 1 for a deep pan and 1 for a shallow pan, both have 20 bolts. ... Ford F-350

I have a 1970 c20 automatic shift on steering column. Shifting has become very difficult, as I have to pull hard all the way to the right and then back to the left to put it into park or reverse, etc. Looks like a part under the hood next to the fire wall is broken (?) but not sure since I do not know what it looked like new. Need so help, since I can not afford to pay a garage right now. Thanks, hope this is a common thing with old trucks. Angie


... Chevrolet Chevy

V8 automatic check engine light came on read either internal trans failure or pressure wrong, whines when first taking off and !st and second gear are are realllly close when shifting from the steering wheel. I also noticed red fluid around the pan. I am only on my third tank of gas since I bought it and dont have money for a trans specialist any help is appreciated


First thing I would check...make sure your trans fluid level is correct, I experienced similar symptoms last week when my Brother overfilled his 2000 Ram....we disconnected the trans line at the cooler,... ran some out,.....CLEARED THE CODES! all ... 1997 Dodge Ram 1500 Club Cab

I need help with this 1993 Chevy 6.5 Turbo diesel in the morning the glow plug comes on and the truck starts. as the day wears on and the truck warms up the glow plug does not come on and it will not start. this started when I found twofule lines leaking and filling the valley pan full of diesel. I repaired the leakes and now it is really hard to get the truck to start. can you help


All diesel engines if you have had a leak and repaired it you would need to get a garage to bleed the diesel through the engine that should solve the problem starting the truck. ... 1993 Chevrolet C/K 3500

2001 Ford Excursion with factory alarm no problems till I had to change the battery, now the alarm automatically sets itself, even when I am sitting in the truck with the keys in ignition. PLease help


... 2001 Ford Excursion

Lost the keys for a 92 ford truck, need the key number from the vin. Ford only stores the vin # for 10 yrs. If i cant get it from the vin i need help of where to drill it out at.


... 1992 Ford F250

Engine Mechanical problem 2004 Dodge Truck V8 Four Wheel Drive Automatic diesel 100,000 miles i have several of these trucks and 2 out of 5 start hard have to crank them longer then the others and some times have to give them a shot of either to get it running and they both crank fine and once started run great so it seems it maybe electrical mechicanel but i have no idea where to start pleas help thanks so much Dave P.S. also i have herd that you can program features of the truck by the


... 2004 Dodge Ram 3500 Truck

I have a 88 chevy cheyenne 1500 2wd work truck. It has 103k miles on the engine. It is a automatic 4.3 v6. I just purchased the truck. The only problems are the wipers will not stop; But the problem I really need help with or at least some direction is that it idles very fast and will not slow down. I've checked to see if the cable was stuck and so forth. I can't figure out why it won't kick down to a normal idle speed. The truck sat for awhile.... yr or so. It is a fuel injection/throttle body


Idling very fast could be vacuum leak or the temp sensor look 4 a bad vac hose or a leak around the intake manifold gasket as 4 the wipers thy are known 4 that when thy git wet i have tried drying them it worked 4 a little wile till i could re pla ... Chevrolet 1500

I just bought this truck off of ebay and it is great except i had to change the o2 sensor circuit high volt bank 1 sendor 1 & 2 and the crankshaft, now i'm getting the p1762 code and i need to get fixed so i can get truck registered, i live in tn where you have to pass emissions before you can register a vehicle, the truck runs fine, a little slow on the pickup and go but other than that it runs fine, i have a 1998 dodge ram 1500 quad cab 5.2 motor 318 automatic, any help would be great


Where in there is your question ?\015\012just go and register it if it fails emisions thy will tell you to fix it plain and simple\015\012do it on a busy day or close to clsoing time where thy might over look a small problem :) cheers ... Dodge Ram 1500

I lost my ignition key to my 1996 Ford Ranger XLT 3.0L automatic, and I am trying to start my truck so I can even try to get another key made. But I was wondering if there is a way to start my truck, like hotwire it. But without doing permanent damage to my truck. Or if there is a way to turnover the ignition without the key? I know that i can take the key out while its driving, I don't know if there's a trick to start it without the key? So if anyone knows how to help it would be greatly apprec


The best solution I can offer is to take your vehicle registration and your picture ID to your local Ford dealer. They will be able to cut you a new key by using the VIN on your registration. The picture ID is needed because they are not supposed t ... Ford Ranger

My 1998 Jeep Grand Cherokee Limited with the 5.9 litre with an automatic has no reverse. It will however drive in forward gears. The transmission seems to try to move in reverse, but acts as though it doesn't have enough torque to move in reverse, it acts as though it is slipping. I pulled the transmission pan expecting to find burnt fluid and debris in the pan, but the fluide is bright red and clear with no debris or anything in the pan. I have a Chiltons manual that is worthless in helping dia


This trans did have numerous problems with the weld breaking on the reaction shell it happens all of a sudden that it doesn't leave much if any debris behind.I have been rebuilding transmissions for 30 years and I have seen anyrev problems caused by ... 1998 Jeep Grand Cherokee

I have a 1987 Blazer 4X4. A friend of a friend replaced the transmission (automatic) and it leaks like a sive around the pan. I had another friend look at it for me and he said that the srcews for the pan (4 or 5) just turn and will not tighten. He pulled a couple of those screws and there was nothing wrong with the threads on the screws. He said that the threads in the transmission are striped. Is there a way to fix this? thanks for any help. Brenda


U will have to remove pan and tap the holes use the same size tap as the whole and try bolt if still will not tighten tap with one size bigger and get the number of bolts u need same sie as tap ( one size bigger then you have ... 1987 Chevrolet Blazer

I am currently away from home on business and my wife says the battery in the truck is dead. I havent had to replace one yet since I just bought the truck in March so I cant walk her through removing the old one any help


Keep her out from under the hood ... Toyota Tundra

I just got my battery replaced in my Envoy and ever since it idles low and when I turn my AC/Heat on it shuts the truck off. I heard that I need to get it programmed or maybe after a few weeks it would kind of go back to normal. Help please. What is going on with my truck. It was perfectly fine before, besides the dead battery


Id get a test on my alternator...start it....remove pos lug...see if she shuts off...or slows down the engine....or the batt may not be the proper amperage ... 2004 GMC Envoy

2006 duramax 6.6 litre won't turn over even with boost . when ignition key is turned to start position the info lights flash and there is a clicking sound . I just finished changing the fuel filter , had started the truck to be sure it would start , then shut it off . This is when I tried to reset fuel filter light by turning key to on position and pressing the throttle 3 times , since then it won't turn over . I hope you can help as I am in the countryside , far from help !!!! THANK YOU VERY MU


I had to use two charges when my battery died, replaced both batteries, all is good. On the fuel filter end you need to fill the filter first and then start it, but as you have already run the fuel out of the lines you will need to loosen the air inl ... 2006 Chevrolet Silverado 3500

I have taken off the oil pan from my tranny and have found a bit of plastic with an 'o' ring on it in the pan the truck will drive in reverse but not forward ????? help


THE PLASTIC WITH THE ORING IS NOTHING THEY HAVE THAT IN THE TRANS WHEN IT IS GOING DOWN THE ASSEMBLY LINE AT THE FACTOR IN THE DIPSTICK HOLE WHEN THEY INSTALL THE DIPSTICK TUBE THEY JUST PUSH IT IN THE TRANS WILL NOT HURT ANYTHING AS FOR THE NO FORWA ... Ford F-150

I have 1997 dodge 1500 ram pickup 2wd. when the truck is first cranked up and driven the truck shifts just fine. but as the tempature starts to get to normal operating temps the automatic transmission will NOT shift into third gear UNTIL i let off the gas. then it will shift. it dont shift hard but it will not shift till i let off the gas. fluid levels are perfect. also i dont hear any roaring noises when it is running down the road. help


Your car uses a decent cable from the accelerator linkage to the transmission. This cable controls line pressure boost according to throttle position, hence, the harder you floor the gas, the later and firmer the transmission shifts.What is com ... Dodge Ram 1500

I have a 98 dodge 1500 and when the headlights are on I can turn the ignition off and the truck keeps running.My passenger blinker don't work,and my parking lights come on automatically when I start the truck(not normally)I have replaced the headlight wiring harness and it didn't help.


Id be looking at the rear of the fuse panel to see if somthing is shorting out the other circuts, the fuses for these are under the hood, there may be frozen water in there? ... 1998 Dodge Ram 1500 4WD

Automatic trans not locking into gear, always riding on the clutch which makes the truck have no power and get 8 miles to the gallon please help, also stalls when warmed up cruzing up to 50kph or when stoped. 1991 F-150 4x4 5.0 litre EFI dual air intake, 4 speed automatic with optional overdrive button


Have you checked the transmission fluid? Sometimes if the transmission is slipping that bad it is really low on fluid. ... 1991 Ford F150

I have a 2.4L diesel Toyota Hilux. Its was -30 and the battery died. I have since jump started it and it drove fine (when the battery was dead and tried to start it in very cold, my husband thinks it could have leaked oil) but again, we jump started it later on when warmer weather came and it drove fine. This week, it was back to - 30, battery died. I replaced it today and the truck wants to start, I can tell the battery helps but now, the check engine light comes on and the truck wants to star


... 1984 Toyota 4Runner

I've replaced distributo cap, plug wires, tried to replace rotary botun but it wouldn't com off. am not getting any spark. My truck isa 83 dodge D-150 318 tbi, also replaced coil, what else could it be any info would be helpful. It just died on me and hasen't started since. pleas help I am out of ideas. thank you Ervin Romans


The resistor is a pretty common item. its a white bar on the firewall about 2 inches long with a wire at each end. dont go replacing parts without knowing whats bad, your just going to spend money and not fix anything. ... 1983 Dodge Pickup

I have a 1994 Chev with a 6.5 turbo diesel and i replace the PMD (pump mounted driver) about every 8 to 14 months. Chev. garage is of no help. Truck has 93,000 miles. I have had it since new, and i do not want to give this truck up.


2 fixes:\015\012\015\0121. buy a PMD 6' cable extention and mount pmd inder your dash with a heat sync. on eBay.\015\012\015\0122. buy a newly designed PMD like this on eBay ... 1995 Chevrolet K2500

Acceleration Hello, I have a 2004 Yukon XL Denali. I currently had all of my fluids flushed.. My transmission fluid was real low. Before I had the fluids flushed my truck would not accelerate. Since I have had the transmission flushed my truck is doing better but still will not accelerate. It will change gears once and then it stays the same. Someone told me about a acceleration sensor is needed to fix it. Help!!! Thanks in advance for your assistance.


Is the check enigne light on?\015\012\015\012If not then it could be a trans issue. Check the fluid again to make sure it is level. put the truck on level ground and with it running and in park check the fluid. Add fluid if needed to brin ... 2003 GMC Yukon

I have a oil leak coming from under my truck. The oil pan looks ok and the filter looks ok. I crawed under and looked and the oil appears to be dripping out of a hole on a black plate that is between the oil filter and the oil pan. Any help would be appreciated.


Head gasket or valve cover gasket ... 1991 GMC Sierra

I have a 2003 ford f350 6.0 turbo diesel, automatic the truck has no power!!! I have did the following: NEW- turbo NEW- injector NEW- fuel pressure regulator NEW- high pressure oil sensor NEW- injector control pressure sensor NEW- accelator pedal I have checked all the volums, powers & grounds in this vehicle and compared the infomation. PLEASE I need help!!!! thank you for any help you can provide me!!!!


The only help,I can provide is,if you have tried supreme additives for the fuel,and changed the fuel filters afterwards,then the injection pump,is either clogged,or needs replacing,That is about all that is left ,except for the chip in the computer,b ... Ford F-350
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.9230 seconds