Having problems with your Dodge Ram 1500 ?

I need to know the location of the shift solenoid on a 2005 dodge ram 1500.

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

On Dodge Ram 1500 Cars the location of the shift solenoid is as follows:
\015\012
\015\012It's attached to the throttle body. You can easily access by dropping the transmission pan.
\015\012
\015\012thanks,keep updated and please rate the solution positively.
Repair Help & Product Troubleshooting for Dodge Ram 1500

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to know the location of the shift solenoid on a 2005 dodge ram 1500.


On Dodge Ram 1500 Cars the location of the shift solenoid is as follows:\015\012 \015\012It's attached to the throttle body. You can easily access by dropping the transmissio ... Dodge Ram 1500

How do i replace a shift solenoid on a 1996 dodge stratus. i understand it is on the side of the transmission but i need to know exactly its location and how to access the location. thanks


... 1996 Dodge Stratus

94-01 Dodge Ram dual Halo Projector Headlights. i need to know how to wire this up on a 2000 dodge ram 1500.the headlights only have 1 plug but my truck has 2.


... Dodge Ram Pickup 1500

Where is the fuel pump on a 87 dodge ram 50 Need to know where the fuel pump is located on my 87 dodge ram 50 2.6 so it can be replaced


For 1987 Dodge Truck RAM 50 4WD 2.6L 2BL 4cyl...The mechanical fuel pump is mounted on the side of the head, centered \015\012between the runners of the intake manifold. The intake manifold does not\015\012 require removal, but access can ... 1987 Dodge Ram 50

I need to replace my transmission shift solenoid on my 91 dodge ram 250. It is 4x4. Where is the shift solenoid?


... Cars & Trucks

96 dodge ram 2500 diesel, no start, fuel solenoid won't ingage, no power to pull'in circuit of solenoid, you can turn key on and manually activate the solenoid and the hold in windings will then keep it in and engine will then start. Or you can jump power from the battery to the solenoid and it will pull in and it will start, I need to know where the solenoid gets power from. I think straight from the ignition, but thought it might have a relay, I don't have a wiring diagram available right now


Theres 2 solenoids on the top of the firewall just left of ur brake booster. 4607036 is the relay ... Dodge Pickup

Code P0441 (code P0441 dodge 2004 intrepid) could be any or all of the below but I need to know where these items are located and what they look like bad vacuum switch evap line or canister open in PCM purge command circuit open or short in voltage feed circuit to purge solenoid faulty purge solenoid restrction in evap solenoid, line or canister corrosion or resistance in purge connector bad PCM


... 2004 Dodge Intrepid

Need to know on distributor where #1 spark plug goes on 1999 dodge 6 cylinder ram pickup I believe the firing order is 1,6,5,4,3,2 and the plug order standing in front of the pickup starting nearest the front grill on the drivers side is 1,3,5 and on the passenger side starting nearest the front grill is 2,4,6


Please don't forget to rate:\015\012\015\012 ... 1999 Dodge Ram

Need cylinder diagram of 2001 dodge ram 1500 v8 5.9L . actually just need to know where the number 1 cylinder is on the block.


Distributor turns clockwire rotation\015\012From the front of motor\015\012\015\0121 - 3 - 5 - 7 Drivers side front to rear\015\0122 - 4 - 6 - 8 Passenger's side front to rear ... 2001 Dodge Ram 1500 Truck 2WD

Auto question,I have an 96 Dodge Ram w/ 5.2L V8 eng.the problem is dtc codes P0300 and P0301,random multible cylinder misfire detected,and cylinder #1 misfire detected.Ive replaced the spark plugs, plug wires,rotor cap and rotor.what else do I need to check or change? camshaft sensor?,crankshaft sensor? coil? or do you know which sensor detects the misfire? or do I need to do a cylinder compression check?How do i solve this problem? Thanks Danny


I would check the injector. Pull the plug and check for corrosion. Use on ohm meter to check the injector. The resistance should be 11 to 15 ohms. Check it against another injector. they should be close. You can also check the injector plug. best to ... 1996 Dodge Ram 1500 Club Cab

Need to know the size of the socket needed to remove the front hubs on a dodge ram 3500 1 ton 4 x 4 with cummins engine?


Removing Tie Rod End Attaching Nut Nut is to be removed from tie rod end using the following procedure, hold tie rod end stud with a 11/32 socket while loosening and removing nut with wrench Removing Tie Rod End Attaching Nut Remov ... 1997 Pontiac Grand Am

TCC failing on 2005 Grand Am 6 cylinder. already changed out filter adn fluid and replaced #1 and #2 solenoid. Want to disconnect the TCC - need a wiring diagram. Thanks! Car is NOT stalling out - struggles to shift when cold unless I drop down to 1 and 2. And TCC pushes rpm up a couple hundred after cruising at 55 mph for about 10-15 minutes. Where is the darn wire located?


... 2005 Pontiac Grand Am

Where is the shift solenoid located? i need to replace one and dont know where they are located.it is on a 1997 voyager and i need to replace it.3.3l 4speed auto 41te a604


The front side of the transmission behind bumper under the air cleaner.. ... 1999 Plymouth Voyager

Need to replace 1-2 shift solenoid in my 2000 gmc envoy, but i don't know which ones are the 1-2


It is furthest back, closest to the left(driver side) of the valve body. It will have a red and light green wire going to it. \015\012\015\012AC Delco part number: 24230298 \015\012\015\012You can get it from places like rockauto.com fo ... 2000 GMC Envoy

I have a 95 GMC jimmy, 4.3, 4WD...pulled two codes: 1 - PO756 2 -PO753 Car will not shift out of 2nd gear. What part do I need?? shift solenoid? VCM-A 1-2 shift solenoid control?? need help fast...PLEASE!!


The PO756 code is: Shift Solenoid Performance or Stuck Off and the P0753 code is: Shift Solenoid A Electrical\015\012\015\012\015\012Both of these codes are related to the transmission and could be anything from a small piece ... 1995 GMC Jimmy

Where is the location of bank 1 oxygen sensor on 1996 dodge ram van 3500


Side of motor closest to inside of car ... Cars & Trucks

I need to know where the voltage regulator is located on a 1985 dodge ram 250 5.2 318


Its near the front on the wheel well ... Dodge Ram 250

Need to replace the fuel pump on an 02 dodge ram. 4wd, 1500, 4.7 engine. Where is it located? Is it actually in the gas tank and is there only 1 fuel pump?


Yes its in the tank, and yes there is only one. A little trick to save some time is if you can, is to take the bed off the truck. That way its easy to get to and replace, otherwise you will need to drop the tank. ... 2001 Dodge Ram 1500 Truck 2WD

I have a 95 saturn SC1 automatic and it is shifting hard in all gears. I was told to check 2 things. I was to check the pressure line fuse under the hood. Cannot locate. Please tell me what fuse I am to check. The next thing is the solenoid or valve body. Currently I need to check the fuse. Please let me know where this fuse is.


The fuse is most likely not your problem, remove the electrical connector on the top of the transmission and observe if there is any burnt terminals which would require the electrical plug be replaced, if that appears to be fine get a OHM meter and o ... 1995 Saturn Sl

Need to know where my fuel filter is located - 1998 Dodge Ram 1500 4WD


Your truck is not equipped with an inline filter, The filter it has is on bottom of fuel pump, Located in the gas tank ... 1998 Dodge Ram 1500 4WD

Error codes What is "DTC detected in ECM(engine control modual) PCM (?) and any idea on what I need to do. My "check gages" light is on and I keep getting told the error code mean different things. P0523, P1682, P1693. Do you know where these sensors are located or how I can find out? This is a 1999 Dodge Ram 3500 cummins diesel.


P0523 means the Oil pressure voltage to high. Your Oil pressure sensor may need to be replaced.\015\012P1682 means your charging system is to low. Your voltage regulator may be going bad or the whole alternator.\015\012p1693 means a Diagnostic troubl ... 1999 Dodge Ram

NEED TO KNOW LOCATION OF SHIFT SOLENOID B - 2001 Pontiac Grand Prix


... 2001 Pontiac Grand Prix

I need to change out my serpentine belt on my 1996 dodge ram truck, and I cannot locate where to take off the tension I know it is somewhere under the altenator


It a pulley on the left side below the alternator. requires a 14mm? socket on a torque wrench or a socket wrench. requires some muscle to turn it to the right to release the tension ... 1996 Dodge Ram

I need to find out where the shift solenoid is located on the transmission for a 2000 Dodge Caravan.


I've been having this problem with this car for a while.This is the third time which I needed to change the damn solenoid in 3 years.You need to take the whole air filter off,you have in the front two screws,and two more just to loose the clamps.You ... 2000 Dodge Caravan

I need to know how to locate and remove the oil pump on a 1998 Dodge Ram 1500 half ton truck. It has a 5.9 liter engine.


Take off the oil pan, look up. There should be 2 bolts holding the pump, the pump looks like a round screen. ... Dodge Ram Pickup 1500
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.4330 seconds