Having problems with your Chevrolet Malibu ?

How to remove tha crankshaft pulley bolt for chevy malibu 2001

\015 It looses to the right or left\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for Chevrolet Malibu

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to remove tha crankshaft pulley bolt for chevy malibu 2001


... Chevrolet Malibu

How to take off crankshaft pulley on 2001 chevy metro. When I turn center bolt the pulley turns. Is there any other bolts that need to be removed? How do i remove this pulley?


If you have a standard transmission, put it in a high gear and set the parking brake.\015\012If you have an automatic, you might have to remove the starter and lock the starter gear with a screwdriver or vicegrip. Make sense? Also, you may ne ... 2001 Chevrolet Metro

We remove the pulley on the crankshaft but there is a bolt which was connected to the pulley which we can not remove. It is located in front the damper. We are turning the bolt connected to the damper the same direction we turn the pulley to take off the crankshaft pulley, to the right(1998 Ford TaurusSE). The bolt will not loosen we tried the other direction but the new crankshaft pulley which goes back on goes the same direction as the old on.


Do u mean the center bolt that holds the crankshaft harmonic balancer on to the crankshaft? the balancer is what the crank pulley is attached to. ... 1998 Ford Taurus

Would using Loctite thread locker on my 2004 Chevy Optra crankshaft pulley bolt be a problem in the near future during its removal during the replacement of the timing belt on the scheduled maintenance?


It will only be if you use the wrong type of loctite. There are 3 different kind. the kind you want is the blue. it will hold the bolt tight but still come off wasily enough when you need it to. The green is hardly worth the time it just not good for ... 2005 Chevrolet Aveo

How to remove balancing crankshaft pulley 2001 chevy malibu


... 2001 Chevrolet Malibu

Working on a 1998 Dodge Caravan2.4 4cyl engine. Have removed notor mount power steering pomp, inner splash shield,. dont know how to remove outer bottom belt shield. the directions i got from auto zone did not say anything about removing the crankshaft pulley. but the shield is not slotted only way to renove is torenove the pulley. Is this correct , is the bolt right or left hand thread, i have attenptedto loosen with no luck. please advise on how to procede and what steps to finish disassenbly.


... 1999 Dodge Caravan

The crankshaft pulley on my 2004 kia sedona came loose. I had a non Kia Dealeer mechanic replace the timing belt 26000 miles ago. Now the dealer says that will not honor any repairs, even though theynhave had it in for engine light problems two tiomes since then. They have adjusted the timing two times. Thats what they said. can the timing be adjusted without removing the crankshaft pulley? What I am getting at is was it my fault or did they nnot tighten the pulley bolt the correct way those two


The timing can be adjusted without removing the crankshaft pully, its done by turning the distributor and aiming a timing gun light and setting the timing marks outside around the pully. The original mechanic did tighten everything correctly because ... 2004 Kia Sedona

Broken crankshaft pulley bolt on mitsibushi pajero 2.5td 1993 rhd automatic.how to remove easily the broken part which is in crankshaft,pulley is off


What are the causes of crankshaft bolt breakage ... 1998 Mitsubishi Montero

The tensioner pulley on my 95 chevy truck siezed up.......I'm trying to remove the bolt holding the pulley in place but I may have stripped it because the bolt is relatively loose but will not come out.


The pulley bolt turns RIGHT to loosen it. Replace the tensioner assembly. That bolt turns LEFT to loosen. ... 1994 Chevrolet Astro

How do i remove the crankshaft damper pulley from a 2000 chevy tracker? are the threads left handed, or standard?


... Mazda B-Series

Replacing the starter on a 2004 chevy malibu classic... where are the bolts located at to remove the starter. removed 2 but it won't budge


... Cars & Trucks

Can't remove crankshaft timing belt pulley BOLT!


You will have to brace the crankshaft somehow, either by way of the flywheel, or the pulley. The trick to getting the bolt to break is "heat". Propane will sometimes work, but it's generally not hot enough. You want to get that bolt glowing if you ca ... 1994 Mercury Capri

Idler pulley change on a 2004 chevy trailblazer 6cyl. After removing the belt can you just remove the bolt that holds the tensioner and remove the tensioner arm. what happens to the spring tension when this happens.


Nothing it will hold its own pressure comes off as one assemble u can replace just the pulley if need be ... 2004 Kia Sedona

I have a 2002 chevy 1500 z71 and the pulley when looking at the motor on the left top wheel broke off. Can i just replace the wheel by removing the bolt or do i have to replace the whole pulley. And is that a tension pulley that i am speaking of. It is prob. 3 inches.


It is an idler pulley. Just remove the bolt throw the old piece away and put a new one on. ... 2002 Chevrolet Silverado 1500HD

Crankshaft pulley removal - no clearance between frame!


Put a jack under the engine. Loosen the upper engine mount bolts and lower the engine until you have enough clearance. ... 1999 Chevrolet Metro

Remove crankshaft pulley bolt of a 2002 chev tracker what way does bolt turn to the right of left


... Chevrolet Tracker

I need to remove the crankshaft pulley bolt what's the right direction to turn the bolt


... 1998 Plymouth Neon

How do i remove the power steering pump from a 1995 chevy cheyenne 4.3 liter engine? I am trying to replace the pressure side hose on the pump and cannot get to the mounting bolts on the pump because of the pulley,or the mounting bracket for the pump because the pump is too close to the bolts that holds the bracket on the motor.


U need to get a special tool for pulling asnd installing the pump's pulley, as soon as you get the pulley off the pump is easy to remove, Autozone and Kragen loan this tool with acredit card secrity deposit. ... 1995 Chevrolet K1500

How do I remove the crankshaft pulley on a 1985 Nissan pickup. Us there a bolt or nut in the center of the pulley hub, or is it pressed on?


... 1984 Nissan Pickup

Does the center bolt within the crankshaft pulley have to be removed to get the pulley off. The fender/ frame seems to be in the way. any tricks.This is for changing the water pump and timing belt on 1995 metro four cyl. Joe


Yes it does have to come off, you will have to undo the motor mount on that side of the engine and lower the engine a little. use a jack with a board under the enging to lift and lower as needed. ... 1995 Geo Metro

On a 99 grandam what size socket dose jt take for crankshaft pulley? How do you block pulley to remove bolt?


15 MM socket, I have put two bolts in the pullley and used a bar between them and the frame. I can not remove the bolt on the 99 I'm working on. I have broken two impact sockets trying to get it out. The book says to remove the inspection cover at th ... 1999 Pontiac Grand Am GT

Is there a certain way to undo the large center bolt on the crankshaft idler pulley,if so how we can not get it to loosen up to remove the pulley.


You need to get a gear pulley to release it it at advance forr around 10 bucks they simple to use ... 1998 Mercury Sable

I can't get the crankshaft damper pulley off of a 2000 Dodge Stratus, 2.4L, DOHC. My end goal is to remove the timing belt. I have already removed the accessory drive belts, but cannot remove the crankshaft damper pully. Before the pulley gets out far enough to remove it, the pulley bumps up against a body component.


Download this link and find your Service manual for your vehicle. It will serve you well and to keep for future reference\012\012http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717 ... 2000 Dodge Stratus

I am replacing the oil pump on a 98 chevy malibu, i took all the bolts out of oil pan and cant figure out how to remove the pan to get to the pump. andy suggestions?


Take loose the motor mount bolt and jack the front of the engine up to clear the oil pump and remove the pan,.the bolt the runs thru the center of the mounts ,the easiest way ,hope this helps you, thanks robert b. ... 1998 Chevrolet Malibu

What direction do you turn to remove the crankshaft pulley bolt for a 1996 oldsmobile 88


Good question, however you need to be able to keep the rest of the engine from turning while removing the bolt. While you are sitting front of the crankshaft you will turn it counter-clockwise. I hope this assisted you. ... 1996 Oldsmobile Eighty Eight
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.1190 seconds