Having problems with your Chevrolet Impala ?

MY 2005 IMPALA TURN SIGNALS AND HAZARDS STOP WORKING BUT ALL MY FUSES ARE GOOD

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Are you suer that all the fuse/flasher for Turn / Hazard lights are OK? (Page 342 from Owners Manual)

21a9b5f.jpg

After to check the FUSE/FLASHER, and check the bulbs, I suggest check this wiring diagram for 2005\015\012\011\011\011 Chevrolet\015\012\011\011\011 Impala...

3af9a63.jpg

\015\012Fig. Front Park, and Turn/Hazard Lamps (Impala)(c) (2005)\015\012

Hope this help.
Hi! Are the turn signals in the dash working when you turn it on? If it is, We may only have bulb problems. The bulbs may just be faulty and needs replacement, you can notice a blackish color when the bulbs is faulty. Hope this helps and have a good one!
Repair Help & Product Troubleshooting for Chevrolet Impala

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

2002 F-250. My back turn signal stopped working but the bulb was still good and the fuse was still good. Then all of the turn signals went out and when I checked the fuse again it had blown. I replaced the fuse and it blows when I turn the left signal or hazard lights on. I went through 5 fuses in about 3 minutes. what could be wrong?


You have a short somewhere in the wiring for the left blinker, which also explains the fuse blowing when the hazards are actuated. The easiest way to check this is, with the engine off, take a multimeter, set to ohms, and touch the red lead to one si ... 2002 Ford F250 Super Duty SuperCab

Jimmy gmc 1997 stop lights are not working, but turn signals are working, stop light fuse is ok, hazard and turn signals flasher working good. I would like to know why stop lights are not working.


Is the third/hi mount brakelight working? Try wiggling the turnsignal switch while applying the brakes and have someone check to see if the brakelights come on. If so The turnsignal/multifunction switch is bad. ... 1997 GMC Jimmy

I have a 2000 dodge grand caravan and the turn signal just do not work the hazard lights do and when I click for the turn signal I do not get any clicking sound whatsoever. I cannot find any fuses that are labeled turn signal or flashers only the hazard fuse is a while back before the turn signal stopped working altogether they would not work when the vehicle was cold once it started warming up then the turn signals work but now they don't work at all is this a fuse issue or is it the whole tur


Blown bulb ... Cars & Trucks

MY 2005 IMPALA TURN SIGNALS AND HAZARDS STOP WORKING BUT ALL MY FUSES ARE GOOD


Are you suer that all the fuse/flasher for Turn / Hazard lights are OK? (Page 342 from Owners Manual) ... Chevrolet Impala

My turn signals stopped working and the fuse is good and everything else in the car works even the hazard lights. and backup lights witch the maual says the turn signals are paired with. the switch will go up and down and pop back after a turn and i took off the cover under the steering wheel and i cant find the reley to check it. an i looking for a silver cylinder or a black squarish box.


It sounds like either the blinker switch witch is in the colume or the flasher witch should be in the fuse box under the dash . Does the blinker lite up but not blink ? ... 1995 Buick Century

How to replace the turn signal and hazard flasher or relay. the car's turn signals and hazard lights just stopped working. checked all the fuses and they are all good. wondering if it could be a flasher or relay.


... 2004 Chrysler Sebring

I have no rear stop lights, turn signals or hazards. Parking or tail lights work, as do front turn signals and hazards. Bulbs & fuses are good. ????


Check your wire harness in the trunk. May have to be replaced. May just be a bad connection. Hope its the latter ... 1980 Chevrolet Corvette

Ok I have a 2000 mazda protege and my turn signals and flashers have stopped working. I have checked the fuses and they are good but there is no hot to the relay at all when I turn on my hazards or turn signals


... 2000 Mazda Protege

I have a 2002 PT Cruiser. Last night, none of my night time driving lights worked. Hazard, brake, and turn signals work. Headlamps, parking lamps, rear lamps, and license plate lamps will not turn on. Checked fuses under hood and under sterring column, all good. Power locks stopped working a couple of days before. Can hear the clicking noise from the sensor under the center dash. Don't know if it's related. Any help would be greatly appreciated.


... 2002 Chrysler PT Cruiser

I own a 2000 pontiac firebird. Just today, the turn signals stopped working. they dont flash in the dash panel and they dont flash on the car however, my hazard lights work perfectly. The fuses are good too. i dont know what it could be. i already replaced the bulbs but that didnt work. any help would be greatly appreciated.


... 2000 Pontiac Firebird

I have a 99 Oldsmobile intrigue I had the heater core replaced when I got the car back the head lights would not turn on however the brights work the turn signals don't work but the hazard lights work I have checked the head lights and they are ok, all the lights work except the headlights and the turn signals the fuses are good the ground from the headlight is good I changed the multi function switch and that didn't fix it. is there a headlight relay on this car? Where are all the grounds at is


In order for the heater core to be changed out, I'm pretty sure the dash has to come out, and there are many many wires that he could have hit or pinched that would cause this. It's hard and time consuming to trace down the wire that could be the cul ... 1999 Oldsmobile Intrigue

Winshield wipers, hazards, and turn signals stopped working. fuses good. new turn unit


... 1997 Ford Taurus

Where is the Hazard/Turn Signal switch located in a 2000 Dodge Intrepid? My Turn Signals & Hazards stopped working without any warning and all light bulbs and fuses appear to be good. I have ordered a replacement part. Thank You! Mike


2000 Dodge Intrepid 2.7L SFI DOHC 6cylThe Flasher is located\015\012\011\011\011\011\011\011\011\011 \015\012\011\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\015\012\011\ ... 2000 Dodge Intrepid

How do I find and replace the turn signal fuse on my 97 chevy s-10? The hazard flashers work fine, but the turn signals have stopped working. Doesn't seem to be an issue with burned out bulbs, so I'm assuming the turn signal fuse is bad. Can't find it on my truck.


Look in driver side, on side of dash) there is a small doorand look for the fuse must be 20 or 25v. God luck ... 1997 Chevrolet S-10 Pickup

Where are the fuses for the trailer turn signals on a 2003 F250 I have the same problem with my 01 Superduty. My turn signals and Hazard lights both stopped working at the same time. It may be coincidence but I rented a trailer with lights and they worked fine the entire 4 hour trip. The next day no signals or hazard lights at all.


The fuses r located exactly behind the power distribution box.just check out properly before replacing.\015\012thanks. ... 2002 Ford F250 Super Duty SuperCab

Turn signals do not work. The fuse is good, the relay is good, the bulbs are good, the hazard lights work but i get nothing on the turn signals


Replace the switch?? just a thought. ... 2000 Dodge Durango

I just bought a 92 Rodeo for my son and there seems to be something wrong with the electrical wiring for the left turn signal. Hazards work, right turn signal works, and the fuse is good but left turn signal will not work.


Indicator stalk is faulty. ... 1992 Isuzu Rodeo

On my 2004 impala, the front right turn signal doesn't work, (only works with hazard lights). And the back right signal is fast. The signal "clicking" sound is non stop but on the other hand both the back and front left signals are working fine. The right signal doesn't even show up on the dash unless its the hazard lights. What do I do?


If the turn signal filament of the right front park/turn lamp is known to be OK and the hazard switch is in the normal position, the hazard switch or the turn signal/multi-function switch could be defective ... Cars & Trucks

My cigarette lighter does not work,its new and its not a fuse. Also my dash lights do not work. A bigger problem is that when I turn my headlights on all the gauges will stop working.When lights are off all gauges work correctly turn them on and they all stop working and both turn signal lights will light up like the hazards are stuck on but their not. Can anyone point me in the right direction?


Sounds like you have a bad ground. could be the printed circut on the back of the cluster. as for the cig lighter def stsrt with a new ground ... 1988 Chevrolet S-10

1998 Ford Taurus hazard lights and turn signals stopped working. fuses are good, what's next?


The switches in the steering wheel ... 1998 Ford Taurus

Flasher fuse All the bulbs are good and the flashers work. I just replaced the flasher fuse but my turn signals still do not work. The turn signals started behaving erratic and got slower, then just stopped.


... 1999 Buick LeSabre

I have a few different problems with my 2003 Impala. First off sometimes when I turn my turn signal on it will blink once and stop working. a quick fix is to hit the hazard lights on and off and then the signal lights work again. I have read that this can be fixed by replacing the hazard switch... is this true?? Second, the airbag light for the drivers seat, that comes on when you start the car, stays on permanently. I have read this is an electrical problem, but how do I fix it?? Third, the


... 2003 Chevrolet Impala

I have a 2002 durango and my turn signals, high beams, hazardous lights and wind shield wipers stopped working altogether. I took it to auto zone and they checked my fuses and they said they were good! So I'm lost at the problem or what to do.


Look around the battery and locate the negative battery cable, it should have a small wire that connects to the metal of the engine area. If all looks good there, I would suspect the turn signal combination switch being bad. This is a common problem ... 2002 Dodge Durango

Ford f600 1987 --stop lights not working , switch on pedal is good -no 12 volt on either side of fuse , need a wiring diagram , truch has mini master cyl and a booster motor which runs when pedal is pushed when engine is not running. Where does power come from for stop lights? Turn signals work ok, no volt from brake circuit going to turn signal switch.. A wiring diagram please. tk has hyd brakes.


I have the electrical diagram and need to scan it first ( haynes manual), it's very late night here and I'll send it to you tomorrow morning. ... Ford F 450 Super Duty

1998 Ford Taurus hazard lights and turn signals stopped working. fuses are good, what's next?


Hazard switch try in out alot fast may fix or spay with co cleaner in side switch ... 1998 Ford Taurus
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.0357 seconds