Having problems with your Chevrolet Camaro ?

I have a 94 camaro and im trying to remove the engine. can I take it out through the top or do I need to drop it out the bottom. If its possible to take out from the top that would be easier for me. Let me know as soon as possible please. Thanks Mark

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

COMES OUT THE TOP
Repair Help & Product Troubleshooting for Chevrolet Camaro

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a 94 camaro and im trying to remove the engine. can I take it out through the top or do I need to drop it out the bottom. If its possible to take out from the top that would be easier for me. Let me know as soon as possible please. Thanks Mark


COMES OUT THE TOP ... Chevrolet Camaro

I let my van warm up for about 10 mins. or so, and the gauge reads half heat. But there is no heat coming out of the vents. I noticed that the top rad hose was rock solid when I tried to squeeze it. It actually over heated one time. Which I thought meant that the t-stat was possibly stuck. But later it through out some heat, then it happened again. The heat seems to work in spurts. Can someone help me please. I have a 3.3L, Auto trans., Grand voyager LE. If you need more details please let me


That's like the thermostat not working properly... open the thermostat and see the different. if change positively, change the thermostat. ... Plymouth Grand Voyager

How do you change front break pads on a 1998 mercury sable LS? Please only respond if you know how please. I need to do it today because i have to take my 94 year old grandmother to a doctors appointment and i am a single mother of three. I have changed outer arm front struts three times on my own. I would really appreciate if a knowledgeable individual can please help me out, with instructions and a diagram if possible thanks.


Apply the emergency brake and block the rear wheels to prevent movement of the car. make sure the car is on a level surface. Jack the front end up and use jack stands to support the car. Leave the floor jack under the side you are working on just in ... 1998 Mercury Sable

Help please, I have replaced the power steering (p/s), pump pulley and now I am unable to mount the pump back because the pump has a bolt on the back and I am unable to squeeze it back on, it looks like I can take the bolt out with a wrench but I am not sure, could someone let me know if that bolt can come off? and I would also like to know if the p/s pump pully has to go in all the way I have replaced it wile it is still in the van because I didin't want to take it off all the way and was able


If it is the same pump you removed,and the bolt did not have to be removed,then it ought to be able to be reinstalled with the bolt in it.I an not sure what you mean exactley,but if it is a bolt,it will come out.They will be super tight.Yes the pulle ... Plymouth Grand Voyager

I have a 1997 GMC Sierra. My front left(drivers side) tire wears horribly on the outside. (lookin at the tire from the front of the vehicle, the top leans out, and the bottom cuts in. The outside 6inches wears on the tire, while the inside tread does not wear at all.) I was told something about it being the inner tie rod was worn. But from my knowledge, that would not let the tire lean out like that. I was just wondering if anyone knew what the possible cause/repair-cost would be for that issue?


Align the truck, sound like the camber is out of adjustment the upper control arm is holding it out too much, or your lower ball joint is messed up and lets it tuck in. The tie rods on that truck have nothing to do with it. Ball joints are like 40 bu ... GMC K1500

Fire My Rodeo started on fire. The only thing I really remember is that the door locks would work sometimes. Has there been any defect in the wiring. It didn't take but minutes to start a BIG fire. It looks like the fire was contained more on the front drivers side. Could you please let me know if there was any known wiring defects or any other web sites that would show me.


Any aftermarket accessories ? ... 1996 Isuzu Rodeo

I have a 2001 sliver buick century serdan my car has stop running i had it check they told me i had a blown lower head gasket they said it was on top of the motor they also said they would have to take the whole motor out i don't really understand could you please help also something keeps poping up in my car saying..TACT IS OFF could you tell me what this means...thanks


If you blew head gasket it would not start car loosing compression and ur oil and antifreeze would start to mix making alot of white smoke out ur tail pipe,tact this is ur traction control switch ... 2004 Toyota Camry

Audi a6 overheating the water pumb was replace a year ago the car is not liking any where the car starts to over heat and when i put the heater on the tempeture neddle stay in the midle but soon *** u turn it off the car start to over heat????? the other problem that it has when u are at a light or a stop or in idole the car vibrates can u please help let me know what would it be >>???? dont have a job so i cant take it to the dealer anymore;( thankyou


Two issues: One is check the fan clutch to make sure that the fan is turning on to cool the engine, also it is recommended since it overheated to change the thermostat.2nd. This sounds like a MAF (Mass Air Flow Sensor Valve) or a EG ... 2001 Audi A6

Ford F150 Would be it easier to replace the electrical harness than to chase the problem. the truck has two seperate relays i only use the front tank. but did notice that the fuel gauge was not working but did work before. i also made sure to take my time to be careful not to over look any un connected or lose wires. please help thank you!


You could do that,but possibly alot of work for nothing,as we still have'nt nailed down exactly where the problem is.You have two tanks,there should be a switching switch that allows you choose between the two tanks,right?Locate this switch,and test ... 1996 Ford F150 Regular Cab

How do i take alternater off 1998 jaguar xj8. I took off bolts on top and bottom. i can pivot it on bottom but there' still something there that won't let it slide out. What can i do? please help, thanks


On the bottom there will be a metal sleeve inside the bolt hole,which holds the alternator in place.get hold of a small headed bolt with the same diameter as the bolt hole where the sleeve is, and tap it out with a hammer......there may not be a lot ... 1998 Jaguar XJ8L

Was driving my 1998 Dodge Durango 4 by 4 and the RPM went to 3 while I was sitting at a stop sign then check engine light came on took it to Autozone and they said it was a possible that the manifold gasket may need to be changed then I showed them the broken gasket on the intake cover said to replace well later that day the truck seemed as it would not shift I have let it sit for 4 days and now it seems to be ok but have not driven it too far please help


... Cars & Trucks

HI HOW ARE YOU I HAVE A 2005 HYUNDAI XG350 WITH 57374 MILES ON IT COULD YOU PLEASE LET ME KNOW HOW LONG IT WOULD TAKE TO PERFORM "A" MAINTENANCE MULTI POINT INSPECTION THANK YOU


A True Inspection should take 1 1/2 hour at most ... Hyundai Motor 2004 Sonata

Hello i have a ford fiesta mk3 would the mk4 headlights kit the my make please wright back also my car is a auto not a manual it getting low on oil iv ordered the right oil for my auto but how to i reply it do i reply it wist the engine is running or just like the engine oil u just top it up as i need to do this as soon as possible iv asked a ford place where i live and they don't no lol so i just got this special oil and seeing if u guys no how to do it


Not sure about the lights... \015\012Which engine, there are 9 different engines used in 1993 with automatic gearbox. ... 1993 Ford Festiva

I have a 1997 buick skylark and my low coolant light is on so i bought a gallon of the local advance autos 50 50 and filled the resevor let the car run 5 min with cap off level stayed the same am i doing something is there something on the actual radiator please help how long would it take for coolant to enter radiator clue less RJ


Are you sure the coolant is still low in the bottle. The coolant sensor thats in the bottle has a float that can stick. If it sticks the low coolant light will stay on even if the coolant level is right. Try tapping on the coolant reservoir bottle in ... 1997 Buick LeSabre

My 2004 endeavor a/c is draining in the vehicle on the drivers side floor board and i took that side up and was water galore. it looks like it is draining from that black drain from the center but does not go out. solve my problem for me please. i need to take all the carpet out to dry. i would like to get a diagram if possible to see the problem.


Same thing happened with my 2004 endeavor. There are 2 fixes (as I understand) for this...the first is to get the drain hose blown out. It can get clogged with gunk, then the resevoir fills up with condensation water and overflow. \015\012Th ... 2004 Mitsubishi Endeavor

Would like to find some kind of diagram showing proper assembly of 454 V-8 distributor from top end to oil pump for a 1982 chevrolet 3/4 ton pickup truck. There is an intermediate shaft between the distributor and oil pump, guided by vinyl bushings, but how do I insure that they're installed in the correct configuration? Instead of putzing around and jabbing and possibly taking things apart a few times too many, I'd like to know how to get this done right the first time.


The nylon retainer snaps into a shallow groove in the oil pump and the pump drive shaft. Is this a new build or are you just replacing the distributor? Those retainers (not really a bushing) become brittle after a few years.If you notice the drive sh ... 1983 Chevrolet C2500

Ford F150 Would be it easier to replace the electrical harness than to chase the problem. the truck has two seperate relays i only use the front tank. but did notice that the fuel gauge was not working but did work before. i also made sure to take my time to be careful not to over look any un connected or lose wires. please help thank you! 1999 ford F150 taillights not working I have chanfed fuse. relays. and bulbs still can't find problem. I put on a new back bumper and had to change the light


The fuel pump sending unit may be bad or disconnected.Its located on the fuel pumps. ... 1999 Ford F150 Regular Cab

Proportioner valve Never thought slow leak while keeping MC topped off would result in the switch activating. Do you figure the valve has jambed such that even simulating opposite leak will reset it? I have a feeling that this happening after 19 years of operation probably means replace it. Mopar doesn't build the part any longer, but have found one for $160. The Service Manual lists different possibilities by collor "yellow", "tan", etc. I take it they are talking about the exterior color of th


I never tried making it push the other way but if it works let me know,Ive alway replaced it well good luck and maybe try a junk yard ... 1994 Chrysler LeBaron

My 2001 Dodge Caravan started running poorly after I got gas and the check engine light came on soon after. The OBD codes are P0302 and P0420. I have changed all the spark plugs and plug wires but it still has the problem. Would someone please let me know what steps I need to take next to diagnose the problem and ultimately fix it.


P0420 Catalyst System,Bank1 Efficiency Below Threshold 16804 P0302 Cyl.2 Misfire Detected 16686 the p0302 what thats saying is you have a misfire on cylinder 2 find out the fireing order for your van cyc ... Dodge Caravan

I change the idle air control valve on my 2000 nissan maxima and took it to the dealer to have it relearn and the dealer told me it would nt let them relearn the sensor so latter they told me it needed the sensor and the engine control module now the car is worst then when i took it to the dealer now i turn the car off and take the key out and the lights in the dash and radiator fan come on for like ten secons and then it all goes off please help me


Check the radiator fan relay.this relay ground is connected to ECM.It controls this relay.as you mentioned about engine control module.So it can be the problem with relay or ECm not controlling this relay, and this causes the radiator fan to come on. ... Nissan Maxima

I drive a Nissan Sentra 1400i 1998 model with a factory fitted immobiliser system. I am having trouble with the immobiliser and would like to remove it all together - DO I NEED TO TAKE IT TO AN APPROVED NISSAN DEALER / CONTRACTOR, OR CAN ANYONE ASSIST? Please let me know if you know of anyone that can assist - telephone number etc?


If it is a factory fitted system your best to take it to a factory dealership. ... 1998 Nissan Sentra

I have a 2002 buick LeSabre that pumps out hot air on the driver side and cold air on the passenger side. This has dual control. I took it to a repair shop and he said they had to go in the "back door" way and found 3 codes that could possibly show 2 different problems. One of the fixes he said would take a $600 part and the other would take a $300 part. He didn't want to start replacing parts unless he knew exactly which one it would be. I needed the car back and told him I would have to bring


Threr are only two things that I can think of that would be the problem, 1st is the a/c control module 2nd would be the plenum door motor. The module can usually be checked and operated with the right scanner. this would also tell you which door is ... 2002 Buick LeSabre

I have a 2001 Jeep Cherokee Sport. The Yellow engine light is flashing on it. In the past it would just go on and stay on. If I would drive it for a while it would go off or if I disconnected the battery it would stay off for a while. Now, if I try to disconnect the battery the engine light will come on and and flash. Let me know if you need more info, but any suggestions you have of what it might be please let me know.


When check engine flash it means if you continue to drive you might damaged the catalytic convertor normally the engine is not running on all cylin der check it out and let me no good luck .pierre ... 2001 Jeep Cherokee

I have a 2002 buick Le Sabre that pumps out hot air on the driver side and cold air on the passenger side. I took it to a repair shop and he said they had to go in the "back door" way and found 3 codes that could possibly show 2 different problems. One of the fixes he said would take a $600 part and the other would take a $300 part. He didn't want to start replacing parts unless he knew exactly which one it would be. I needed the car back and told him I would have to bring it back at a later dat


Controll head if it has the split controll is common failure ... 2002 Buick LeSabre

Please I Kent plauger needs help. My 2004 Mx-5 miata was running fine yesterday then started running like ****. Went to idling a little rough then when I would try to take off would have to hold it to floor cause it didn't want to go then when it did it would take off like a bullet. It got worse as day went on. Had it checked said cyl 2 misfire. Changed the plugs olds plugs were gone but did not help running any just got worse. Hotter it gets the worse it gets. Couldn't b coil cause it runs cyl


... 2004 Mazda MX-5 Miata
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.5932 seconds