Having problems with your Chevrolet Blazer ?

98 blazer emergency brake will not release

\015 Is there a quick & easy way to release it? Then permanently disable it?\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for Chevrolet Blazer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

1991 chevrolet s-10 blazer how to release broken emergency brake release with no cable


... 1993 Chevrolet S-10 Blazer

My emergency brake is having trouble releasing on my 2001 chevy blazer s10. it releases only by when i pull the lever and when i push the pedal back into position for it be released. im worried of thi


I would check the pedal itself, then pull the drums and try adjusting the brakes, if you havent done this in a while to clean and adjust them you might be better off replacing the shoes, all springs and adjusting them till the drum just starts to dra ... 2001 Chevrolet Blazer

2000 Chevrolet Silverado 1500 brake release cable broke and won't release the emergency brake. I checked the brake release handle and cable and discovered a small nut like metal piece on the floor below the brake release handle that has cable wire running through the middle of it. How can I repair this? Also is there a way to manually release the emergency brake so I can drive the truck?


Same thing happened to me on my 2000 silverado July 3, 2009.There is a release next to the parking brake pedal. You have to reach way under the dash but it has worked for me for the last month. I have the part to fix it but haven't had the time ... 2000 Chevrolet Silverado 1500

I noticed when I stopped, that I could smell something in the right rear tire area and it was very warm. My first thought was emergency brake. I have taken the tire off now and the brake pad is tight and the emergency brake cable is released. I'm not sure what to look at and the emergency brake cable seems like it is pulled but I don't know how to release it. Is there something I can do to release it??


SOUND LIKE REAR BRAKE CALIPER LOCKING UP. ... 2005 Ford Escape

98 blazer emergency brake will not release


... Chevrolet Blazer

Emergency brake release cable broke and I can't release the emerg


... 2000 Chevrolet 3500

Hi I have a 99 Voyager and it has a spring release emergency brake. I recently pressed the brake in when I parked, and when I can back to leave my Emergency brake would not release. I need Help!


Try pushing it down with your foot again and pulling up on the release at the same time. This should release it. Also try backing up while you pull the release. Sometimes this will jar the cable to release. THe cable may need to be replaced ... 1999 Plymouth Voyager

I need to release the Emergency Brake manualy. The brake is on, for awhile if I pushed the brake down and pulled the release it would release. The brake is now set tight, and I can not find a manual release.


There is not. the cable on the brake is the only release. step on the brake peddle and pull release to free it ... 2000 Chevrolet S-10

Replacing rear brake shoes on a 1992 Ford F-150 2 wheel Drive Pickup. The shoes on the passenger side will not align properly because the emergency brake cable will not release. I, of course, made certain the brake pedal was released. That wasn't it. I then took the cable loose from the yoke under the drivers side door.It still didn't release. I pullon the cable from the yoke locationand it will not budge. The drivers side operates as it should. Any idea on how to get this cable to release.


The easiest (and safest) fix is probably to cut the cable loose and replace it with a new one. If you are on a tight budget, you might be able to free it up by squirting penetrating oil into the ends of the cable. Let it soak a while, then try to w ... 1992 Ford F150 SuperCab

How do you release emergency brake 94 dodge dakota after used? Brakes went out used emergency. Now i can't release them.


Either there is a release handle or you may have to press the pedal down further and it should auto-release. Are you up north? salt? rusty cars? if the pedal is UP but the brakes are still applied, then the cables are rusted /siezed and you will nee ... 1994 Dodge Dakota Club Cab

Emergency brake release handle broke, how do i release emergency brakes


... 1998 Ford Expedition

Emergency brake light stays on when emergency brake is released. the lever comes back up when released but drives like it is still on, and sparks were reported coming from underneath. i looked at the cable and it apears to be intact.


... 1999 Dodge Durango

After releasing the emergency brake my lights would not come on. I do have high beam. Is it the switch on the emergency brake release?


The park brake is conected to the head lights on some gm cars and truck. check if it is all the way in the up(disengadged) position ... Buick Century

Emergency brake I broke off the handle while emergency brake was on. how do I release emergency brake to get car to dealer


I did the same thing a couple of months ago. You can release it manually by reaching under the E-brake pedal and pulling the metal piece (don't know what its called) towards you to release the pedal...hard to describe, but feel around under the pedal ... 2002 Kia Sedona

I have a 2004 kia amanti and when I was driving I accidently hit the emergency brake and when I notice the light was on I pulled over about a mile down the road. I release the brake and went home, but I notice later that the brake lights were still on. I check the brake light on the dash board and it was off so I engaged and release the brake several times and they were still on so I unhook the battery cables to turn them off and about an hour later hook them back and they were still on. What do


... Kia Amanti

My '96 chevy blazer emergency brake got stuck on, what do i do?


... Chevrolet Cars & Trucks

Bleeding the brakes, started with the rear then the front- the emergency brake was affected in a way that it did not engage or release. Next I bled the brakes again and started in the front then rear. The emergency brake pedal began to click properly when depressed but the vehicle is not able to move more than 3 inches in drive or 6 inches in reverse before becoming locked in place


Year,. make, model, engine size?rear drum or disk brakes?Can you jack up the car and turn the wheels by hand?Do you use the E-brake on a regular basis? ... Cars & Trucks

Emergency brake light on 92 chevy blazer


Their must be switch somewhere at the back of the pedal that touches earth when you apply the brake ,put you glasses on get a torch and have a look.Never worked on one or evan seen one of these motors so i cant tell you where it is but it will have o ... 1992 Chevrolet S-10 Blazer

I have a 2005 ML350 and the emergency break release won't work and the foot pedal won't engage. I have serviced the emergency brakes on 2 separate occasions and the cable was replaced the first time and adjusted the second. And 1 year 6 month later I have this reoccurring problem. Keep in mind I don't even use the emergency brake. It was discovered when my inspection was due.


... 2004 Dodge Caravan

My parking brake on a 2000 S-10 Blazer will not release when I pull the release handle. How can I release the parking brake?


You need to inspect the cables for binding and it checks good then your cables might be pulled out or the actuator at pedal is stuck most GM come a release at assembly ,you may have feel around for it by the actuator just above the pedal . ... 2000 Chevrolet S-10

Emergency brake won't release when handle pulled on my GMC Denali XL (2003). Handle is pulled, but brake is not released. Is there a way to release this to bring to repair shop?


... 2003 GMC Yukon XL

1991 honda accord emergency brake is stuck or frozen, i had it parked outside for the whole month of February and March 2010 and it started up just fine but when I released the emergency brake it didn't relase the brake.


The cble is housed with a rubber covering on most. If so remove the cable and soak it with WD40 as good as you gat get. Use the red nozzle to spray in side the housing. If the cable has a spiral weaved wire housing spray that housing so the penatrati ... 1991 Honda Accord

My emergancy brake doesnt release. The brake handle just moves freely up and down without releaseing the brake. What would the problem be and how can I fix it?


If it is very cold where you are the cables have maybe frozen due to water in them from last time you drove in the rain.It is also possible the cables have rusted solid. In any-case you need to have them unfrozen or replaced. ... 2001 Toyota MR2 Spyder

Emergency brake stuck on 95 blazer


... Chevrolet Blazer

Rear right parking brake not releasing & the emergency brake cable is broke how do i get it to release


... 1997 Oldsmobile Cutlass Supreme
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2338 seconds