Having problems with your Acura Integra ?

Need to know the torque on Acura integra connecting rod?1998

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for Acura Integra

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to know the torque on Acura integra connecting rod?1998


... Acura Integra

1994 Acura Integra LS- 2.0 lt B20 I have the AC installed and working with no leaks and the clutch works perfectly fine along with the compressor. The AC blows "Cool" , but not cold. What would I need to do/replace in order to make it blow cold like a newer car. I was thinking a new condensor or perhaps a new evaporator, but I don't know for sure. I don't want to go out and spend a few hundred dollars on parts and it still just not work. Also, I used a leak detector so I know I don't have


Quick and easy cheap fix. Go to walmart, get an 18 oz can of freon with the sealer and oil in it, pump up the low pressure side of the ac with 35 lbs of go juice, problem solved. I have a 94 rodeo, hasn't had a compressor in it for 5 years, I finally ... 1995 Acura Integra Coupe

I need to know how to change that timing belt on my 91 acura integra. I no nothing about over head cams, so I really need some help.


First lift the front of the car remove the front driver side tire you would have to remove the plastic gard to acces your damper. remove altenator and other belt , then remove the damper ,the valve cover and the side plastic cover (10 mm bolt) now th ... Acura Integra

I need the radio code for my acura integra 99. Can you get it for me? I needed a jump and when I got my battery charged, the radio was down. I had the code, but don't know where I put it.


You will need to pull your radio and get the ser# numbers from it and take to a dealer with proof of ownership. Thay will give you the code. ... 1999 Acura Integra

I need a fuse box diagram for my 1989 acura integra, it just has numbers and I need to know what the numbers go to, thanks


... 1989 Acura Integra

I need to know more about autopage665 - 1988 Acura Integra


Http://www.autopageusa.com/resources/RS665operations.pdf ... 1988 Acura Integra

I need to know the torque spec for a 2005 3.8 liter connecting rod bolt.


... 2005 Dodge Caravan

I need to know how to properly bleed the clutch master cylinder on my Acura Integra ?


Under the vehicle you will find a cylinder mounted on the bell housing. On that cylinder is a bleeder nipple. Make sure your clutch master is full. Then open the bleeder down under and let it drip. just barely open it so it does drip and not flo ... 1991 Acura Integra Hatchback

I have a 92 acura integra but it got a intake on it ,so i dont know how i have to put the vacuums,i need a diagram for that


It may not be there but check under the hood for a diagram. Many cars have a sticker on the underside of the hood for vacuum hoses.Good luck. ... 1992 Acura Integra Hatchback

Sunroof replacement I need to replace the the sunroof of my 1990 Acura Integra Hatchback because the frame of the glass is very rusty. I already got a used one to replace it with, just don't know where to start in removing the paneling. How do I go about this?


You need to be in the medium or higher range of skill to do this. I am recamending you get a set of directions and go over it very carefully. Retracking a window can be painfull for some one who has done it before. If you don't have or cant get a ... 1990 Acura Integra Hatchback

1990 acura integra My power steering gets super stiff and pulls to the right and goes soft while driving and seems to come and go iv replaced the power steering pump (as it has been needing replaced anyways) but it doesn't have a difference but it makes a clunk when turning the wheel from left to right and after it clunks gives way I was thinking it was my rack and pinion but don't know for sure and would love some feedback to go forward with purchase anything helps


... 1990 Acura Integra Hatchback

I need to know how to disconnect my 1995 Acura Integra's kill switch please.


This link will show you many posts on the Honda Acura killswitch bypass.http://74.125.113.132/search?q=cache:5ur_RTv4fSkJ:www.clubintegra.com/board/showthread.php%3Ft%3D42679+95+acura+integra+kill+switch&cd=3&hl=en&ct=clnk& ... 1995 Acura Integra Coupe

I would like to know if i can get procedures to change a bearing for 94 acura integra for rear axel.And if i need a special tools to do it my self. Thank you.


I would recommend a repair manual for guidence during this procedure.\015\012\015\012REMOVAL & INS ... Acura Integra

Needing main bearing torque on 2001 Acura Integra - B18b1 engine


MAIN BEARING TORQUE IS 56 FT LBS. ... 2001 Acura Integra

I have a 1990 acura integra B18A1 I have two hoses that come out of the throttle body and the one connects to the nipple right below the air intake port is torn somewhere and leaks coolant. But I dont know where it leads to. I cant find any good diagrams either. HELP


... Acura Integra

I need to know where the cam timing marks are for 1998 Acura integra 1.8 Litre w/no vvt.


... 1998 Acura Integra Type R

Need to replace the starter in 1993 Acura integra - I am doing this with my teenage son and neither of us are very familiar with cars. I do know we have to lift it and go in from the bottom but that is about it.


Please see my tip at http://www.fixya.com/cars/r5973094-starter_replace and let me know if you have questions. This will be fun for both of you. :-) ... 1993 Acura Legend

Need to know where the radio fuse is on a 1990 acura integra


... 1990 Acura Integra Hatchback

1996 Acura Integra connecting rod bearing and cylinder head bolts torque?


... Cars & Trucks

Need to know what the torque specs are for the connecting rod bolts?


... 1986 Nissan King Cab

I have a 95 acura integra need to clean inside of front headlights but dont know how to access


... 1994 Acura Integra

Check engine and trans light are on a 2001 Isuzu trooper 2 X 4, I took it to auto zone the diagnostic check showed loose band on transmission I know that I need a torque wrench to adjust I need to know where this adjustment bolt is and how much torque to use. Thanks a million


The band adjustment in not a torque adjustment. Drop the main pan on the transmission. You will see the valve body with filter on it. At the rear drivers side you will see a round dome piece with a flat flange with four bolts in it. Remove the bo ... 2001 Isuzu Trooper

I need to know he torque spects for the oil filter container the bolts on to the moter on a 94 BMW 318i...there are 6 bolts...I also need to know the torque spects on the alternator mounting bracket...


OIL PAN OR TRANSMISSION PAN BOLTS TORQUE ABOUT 7 FT LBS. CAN GET SPECS ON BOLTS SIZES. IF BOLTS SIZES IS 13M I4M 15 M TORQUE BOLTS ABOUT 55 TO 80 FT LBS ... 1994 BMW 3 Series

Need to know how to replace the torque converter on transmission for 2000 Ford F250 Superduty truck. Put it in and tried to bolt it up but it didnt work. Need to know when you put the torque converter in how many times do you turn it to make it drop all the way in the transmission


You must turn and wiggle it on the shaft untill it goes all the way on its got to hit those splines just right and itll pop rite on,,some swearing usaually helps out to..lol ... 2000 Ford F250 Super Duty Crew Cabs

I have a 2001 Saturn SL2 and need to know the part (the conncector/adapter to the engine rear side) that connects from the engine to coolant tank? The hose is the upper coolant expansion hose, but I need to know what is the part that connects this hose to the engine. 2nd- should I have to purchase another Intake Manifold, or just the small connector part? PLEASE! URGENT


The SATURN INTAKE MANIFOLD repair kit is on Ebay with a YouTube movie on how to install it.Great device.Check it out.Car Saturn. ... 2001 Saturn SL
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.8081 seconds