Having problems with your Cars & Trucks ?

Horizontal Angle reading on 56-CST205 tOTAL sTATION NOT CHANGING

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

If your horizontal angle reading is not changing, then either you have the horizontal hold on, where you can rotate the station and the angle readings remain the same, or You have a problem with the horizontal encoder or main circuit board, probably the main circuit board. If it's a hold button then just press it and things should go back to normal. If not then you'll have to bring it to a service shop. You might be able to get CST to sell you s new board, though most likely not since they were bought by Bosch, but the encoders need realigning. That requires an o-scopes to bring the encoder reading in line.
Repair Help & Product Troubleshooting for Cars & Trucks

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Horizontal Angle reading on 56-CST205 tOTAL sTATION NOT CHANGING

If your horizontal angle reading is not changing, then either you have the horizontal hold on, where you can rotate the station and the angle readings remain the same, or You have a problem with the horizontal encoder or main circuit board, probably ... Cars & Trucks

I have a 2004 Chevy Malibu - CD player is reading CD-Changer ERROR. The screen lights up The radio will play but wont let me take out the cd's or anything. The dimmer to the left is also reacting to the radio. Also car is reading in Klm not MPH. Cant fix at this time do to the cd player not allowing me to change anything but the station.

... 2004 Chevrolet Malibu

Ford Ranger 1994 Truck 3.0, Fuel injection, was running fine, was low on gas, filled tank to full, and added a liquid booster, left gas station and truck stalled somewhere several miles later and has never started again. We have changed the coil, checked spark plugs, changed the EGM, checking fuel for contaminants, checked the fuel injection, there are sparks on every plug, battery and Alt, are good. it has been a week, car was towed back to home and it remains a total mystery as what to consi

Fuel pump quit ... Ford Ranger

My comand system on my 2006 R320 is frozen on the radio function but will play CDs. The soft keys have no effect but the steering wheel buttons will change tracks or stations. I have read that pulling the fuse will sort it but don't have a fuse chart. Any suggestions please?

You can try with disconnected battery ground cable, battery is fitted under front right side seat, whether it's left hand drive or right hand drive, if not work have a good look is there any switch stuck on command if one switch stuck it won't be op ... 2006 Mercedes-Benz R-Class

My 2001 E320 heater was erratic in blower speeds on its own. Now it has stopped totally. The fuses are fine and the temp reads normal.Would this be the climate control? how hard would this be to change if it was?

... Mercedes-Benz E320

Inside temp We had to change the battery today.....of course everything now must be reset. I set the radio stations and the clock but can't figure out how to get the temperture readings back to fahrenheit from celcius. I can't find the directions in my book. Thank you.

Go to mechanic shop oreven your local library you'll find it there. ... 2006 Mazda 6

I got my oil changed about 2 1/2 weeks ago and about a week ago my car started running rough, i attributed it to maybe a tankful of bad gas. this morning the engine was knocking and i made a mental note to check oil. on my way home from work, the oil light came on and i stopped at a gas station immediately, (luckily i was at a corner where there was one). the dipstick read NO oil at all!! so i put in 5 quarts and the oil light has still not shut off. it is knocking but not as bad. my question

I had Walmart give me an ambassador package oil change years ago on a grand am and the nimrods never tightened the filter and the same thing happened to me. Even though I put oil in the engine seized within 48 hrs. Good luck! Get your do ... 2005 Suzuki Forenza

Electrical Problems I stopped at a gas station and shut off the engine and when I tried to start the truck the battery was dead. I jumped it and got it started right away and drove it home. On the way home the voltage gauge was reading about 12 volt or in the middle. I change the battery and took it out for a long ride. During the ride the vehicle showed signs that the battery was draining. The gauges, windows, lights, and all other electronics in the vehicle stopped working. The truck kept run

Al, this truck has a regulator locted inside the altenator, it also has a relay located in the power distribution box under the hood, see your owners manual for exact location, to verify an no charging problem, start the truck and measure the voltage ... 1998 Ford F150 Regular Cab

2003 Jeep Grand Cherokee, 6-cyl. Check Engine Light On Codes P0031, P0051, and P0136. Changed all 4 oxygen sensors, disonnected battery, totally drained by blowing horn, etc. Still have check engine light on and reading these same error codes. Any ideas would be appreciated

Have the codes cleared from the computers memory.Good Luck and have a good XMASS.From Ernie At RedDeer, Alberta Canada. ... Jeep Grand Cherokee

Hi, my name is **** i own a 99 v6 granduer my engine kept cutting out when it reached operating temp i took it to the dealer to be put on the diagnostic machine and they have told me that i need to change both the crankshaft sensor and the crank angle sensor i was reading a reply to somebody who has the same problem could you send me the diagram how to locate and replace them.many thanks ****

It would have been better to get the OE part changed by the dealership as it would have completed the job once you have idenfied with their help.\012However you can try for manuels in the hundai website or ask the friendly dealership ... Hyundai XG300

Hi i have tahoe 2 door 4x4 1500 1996 i have changed the back x with used from the junk yard my speed meter start to read less for example my gps reading 75mph and my speed meter in dash board read 50mph 1 day later my transmision broke down and the front wheel get lucked like i turn the4x4 and the abs system what is wrong and what should i do for less budget change some sproket in the back x defrential or change it all there is no noise in the the new back x i also need the service manual please

What it sounds like to me is that you have put the wrong gear ratio in. In 4 wheel drive vehicles you have to have the right gear ratio in the front and back. Both have to be the same. The way it works is the transfer case turns at the same speed. An ... 1996 Chevrolet Tahoe

I have a 07 pont grand prix with code 420 ( cat inefficiant) I change the cat and i still have the same problem. After clearing the codes I can drive it for 5 to 7 days before the code comes back. I check my engine monitors everything show completed except for cat and evap. I recently changed the rear O2 and it now reads about .620 and the FWD readings changes from high to low. Before I changed the rear it was changing from high to low aswell

... 2007 Pontiac Grand Prix

Radio stuck My 1995 Camry Coupe's radio is stuck. All buttons (to change stations, station preset, Am/FM, tape, CD) except one (see below) does not will work. I can still make the anntena go up by pushing the ''on'' button but that's it. When I shut off the car, the radio display is still there (radio station, volume level, etc.). I'm afraid this will drain my battery overtime and I really, really want to be able to change stations. Thanks for your help

... 1995 Toyota Camry

01 kia rio has bad rings in the # 3 cyl. i've been just changing the plugs and adding oil as needed but now the same old process happens missing, check engine light, changed all the plugs and wires still missing, still reads a code. plugs are firing (i'm thinking timing belt but the miss is'nt that bad)how can read the code? some cars can be read without a diagnostic pluged up

Rent a scanner, they present more information better that blinking lights. If the engine has a lot of miles, the timing belt is probably ready to fail. The better answer to your problems might be finding a good used engine in a wrecking yard rather t ... 2001 Kia Rio

93 chevy suburban: started out with low voltage reading. checked battery ok changed alternator (faulty reading 30 amps from auto store check) also for good measure changed cap, rotor, plugs. now low voltage reading on truck and voltage meter 12.58 from brand new alternator. any suggestions would be helpful.

You have a bare wire leading form the alt too the field prob right at the intake manifold!! ... 1993 Chevrolet Suburban

Fuel gauge on my 2004 f250 will suddenly drop to empty and it changes the ambient temperature gauge to a really low temperature. It will some times change to the right fuel level after I turn it off and start it again. Other times it will take a few days. Also the compass reads the wrong direction and won't change other times it says it is calibrating. It will read the right direction sometimes when the outside temp is over 80.


Iv been having issues with a 92 chevy k1500 5.7L tbi. the fuel gauge is always reading full. i disconected the wire harness to the sender unit and the gauge goes way past full. i relocated the ground to a better spot and stil have no changes. the temp gauge is also not working...always reads to its lowest point. my main concern is the fuel gauge. just wanted to add that incase it ties into the same issue. i'm looking for all possible problems before changing the sender unit

I'll tell you exactly what it is my 92 blazer 1500 did the same thing its the ground wire that goes to the sending unit its either broken,or just rusty it should be bolted to the cross member rite above the rear axle check it out and good luck ... 1992 Chevrolet K1500

I am having a problem with high oil pressure on my 1996 vw cabrio. The pressure is 80 on 2000rpm's and the mechanic has changed out my oil pump 2 times, the sensors have been replaced. the oil has been changed, filter replaced? Is the gauges for reading the vw different those gauges to read regular american cars. He has put in thin oil to try to fix this.

That is completly normal, I think the mechanic is pulling your leg. yes the VW gages read in bars and you have about 4 bars witch is normal. The oil system has a over pressure dump which dumps back to the sump. I wouldnt worry about the pressure but ... Volkswagen Cabrio

My 01 passat with 1.8 is having random missfire's . first the check engine light came on and I had it read it said it was running leanon bank 1 , the mechanic told us it wasmost likely the mass air flow sensor ,so I changed it. It started running better ,but then soon after I started it up after work and it was ideling funny and started bucking and the engine light came on. I had it read and it said random mis fire . I changed the plugs and gaped at .32 but still missfireing.the mechanic said wa

My 04 jetta 1.8T is having random missfire's . first the check engine light came on. after I started it up after work and it was ideling funny and started bucking and the engine light came on.?? its this the spark plugs or what? How much will this co ... 2001 Volkswagen Passat

I have a 02 Chevy Suburban. For the last few weeks the radio has been acting strange. When you change the station with presets or by tuner, the entire radio powers off. It looses the set time and defaults to 1:00. If I leave it for a few minutes I might be able to change the station, but generally it just powers down again. We were having battery trouble and figured this was probably related, however after replacing the battery, the radio still powers down upon pushing any buttons. Could

This might help to find a nd fix the problem.\015\012\015\012http://www.modifiedlife.com/2002-chevrolet-suburba ... 2002 Chevrolet Suburban 2500

1995 Buick Lesabre Limited cooling fans run all the time, have checked relays, seem to be fine, checked temp sensor, olm reading changes as engine warms up; not sure what readings should be but it does change.

... 1995 Buick LeSabre

Timing advance and dwell specs ford probe 1994 2.5L 24v. Can 'dwell' be adjusted or is it computerised, not sure how dwell angle is or readings required in relation with timing advance/******. manual gives BTDC and ATDC but never mentions 'dwell angle readings ???? is it adjustable?

Timing and dwell angle is non adjustable in these later model vehicles. the dwell is simply a reading that might be useful on a scope, while the timing advance is controlled by the systems ecu(computer) by taking readings off the knock sensor(or pre ... 1994 Ford Probe

Steam coming from passenger side of engine on occasion, not constant. Light on so read code as 0304. Misfire on 4. Changed plugs got all clean but dirty 4. after change same problem. code reads 0304. need assistance as where this puts me because it is intermittant and im going nnuts trying to get it to do it again. other than when it steams shortly runs like a champ.

Sounds like a blown head gasket. Check for water in the oil. Check to see if water and/or steam coming out of exhaust pipe. If you are getting steam, you are losing water. Sooner or later it will overheat. ... 1997 Ford Escort

My 2006 Jetta radio doesn't hold the XM signal. I can receive XM broadcasts fine, but once I turn it off, it always takes at least 10 minutes of "loading" before I can get the signal again. I have to refresh it at least once a week. Right now it is "updating" and won't stop. All of the preset stations I programmed have now reverted back to the 01 Preview station. Sometimes when I turn it on it reads "No SAT Radio". Other times when it is "loading" it will suddenly read "failure" and then the sta

The internet is full of posts about poor or dropped XM radio reception, I really doubt the problem is with the radio or the antenna, if i had to suggest a hard part failure i would look for a poorly grounder antenna lead, buy based ... 2006 Volkswagen Jetta

Temperature readings I just changed my battery and now need to change my readings from centegrate to farenhight. Can you tell me how?

Press and hold temp selection switches ... 2002 Hyundai Santa Fe
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.3276 seconds