Having problems with your Cars & Trucks ?

I need the specifications of the sender unit that sits on top of the head on my 1999 Opel Corsa Lite 1.3

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for Cars & Trucks

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need the specifications of the sender unit that sits on top of the head on my 1999 Opel Corsa Lite 1.3


... Cars & Trucks

What is the head torque settings for my opel corsa lite 1.4i 2000 model


... 2000 Isuzu Amigo

I replaced a oil sending unit on my 89 vw fox,because the old one was leaking. the new one setts the dash low oil lite on. i put the old one back in and the lite goes off. i went back to autozone for a replacement &it also makes the lite come on. there are only two types of sending units for this yr. the other one has too big of threads to fit my fox! my sending unit screws in right on top of my oil filter!HELP


The ones you bought probably were the versions that screw in the cylinder head. Get something like the third one from herehttp://www.partstrain.com/ShopByDepartment/Oil_Pressure_Switch/VOLKSWAGEN/FOX ... 1989 Volkswagen Fox 4 Door

I have an opel corsa lite, Today I tried to switch...


... Cars & Trucks

01 chevy Malibu: I installed a new head unit and had not put the install kit, so it was sitting lose. The unit fell out of the dash and now the lights for the gear shift and speedometer/etc are not working. I put the stock head unit back in (it worked) and the lights are still out. I do not know if this is a wire problem or a fuse problem. Thoughts?


... 2001 Chevrolet Malibu

Toyota hilux diesel 1988 mk2, 2.446cc, had the oil light come on, turned of the engine.Check oil level which was on the top mark of the dip stick so,i replaced the oil pressure sender switch with a new one £22.77, re-started the engine' oil light still on after 5 seconds, turned of the engine removed the new sender unit re-started the engine found no oil at sender unit point, turned of the engine again. Removed the sump pan for a visual inspection all seems to be in order, any ideas as to what t


... 1988 Toyota 4Runner

Opel corsa lite 1.6 big ends torque settings


... Cars & Trucks

Flasher unit replace Opel corsa - Corsa Opel Cars & Trucks


... Opel Corsa

My opel corsa just cuts out while driving specaily when am slowing down or when stoping or shifting down to a lower gear on the 1.4 opel corsa lite what can be the problem please need some help.


... Cars & Trucks

Noise engine noise with oil warning lamp on, This noise sounds like tappet noise, I got the cylinder head cleaned and changed the engine oil.after this we checked the entire oil line cleanes , the oil pressure meter is showing low pressure however the oil pump is ok.still the noise is there, we have cleaned all the oli line in the cylinder head , cam, and casings, I HAVE OPEL CORSA 1.4 2003 MODEL,I AM UNABLE TO FIND THE PRODUCT CATAGORY IN THE LIST BELOW , GIVING FALSE CHEVIRLET ENTRY , PLEASE E


This sounds like bad main and connecting rod bearing they are worn and when they become worn they make noise. Because of excessive clearance between bearing oil pressure drops therefore starving the essential parts of the engine of oil. ... 1998 Chevrolet K1500

Fuel problem i had a new head fited to it ran fine then 2mths ago when to start it and no joy, aa came out and didn't know so had it taken to the garage i use and been there ever sinces the fuel runs back to the tank over nite when its started it stays going but as soon as it tuned off the fuel runs back i have had new seals put in, new fuel filter,glow plugs and have just got a sender unit to try with the pipe work ans a fuel head any one please help i miss my car and want it back on the r


Check diafram in pump ... Cars & Trucks

I have 2011 dodge 3500 cummins smokes when cold started? when started first thing in morning only around 0 blows lots of white smoke smell like unburnt diesel and shakes a bit for 10 to 15 min has had piston rings, injectors, head, a few head gasket all replaced already still does not start right after sitting overnight seems like cylinder six is missfiring when capped of does not smoke. does anyone have anyother ideas of the cause of all the smoke thanks


... Dodge Cars & Trucks

99 jeep grand cherokee 4.7 v8 oil pressure drops from 40 at idle to 0 when given rpms. Will come right back to 40 when you let idle again. I have removed pan and checked screen. It was clean. Original sending unit was leaking so I replaced. Still thew same. I hooked up aftermarket gauge and pressure never goes below 40 no matter what. Hook back up sender and it acts up again. Don't think 2 senders would be bad. Could it be oil in plug in missing up current?


Oil gauge may be bad, you said you changed the oil sending unit, and tried a aftermarket which worked, so the other option is to have you oil gauge checked. The sending unit may be good but you gauge is not reading proper. ... 1999 Jeep Grand Cherokee

I have a 2001 Lincoln LS V8 it overheats randomly with no consistent patterns. I had the thermostat housing unit & thermostat replaced, new heads, new fan and the whole top of the engine was particley rebuilt. It has no leaks except out of the top part of the reservoir, it bubbles and steams out of there (the caps been replced 3x) What can it be??


... 2000 Lincoln LS

My opel corsa lite 1996 1.3 liter stutters quite heavily when idling and sometimes sort of miss when driving. What may the problem be? There isnt a category for Opel on the drop down list. thats why i chose chev. I would really appreciate some help because everyone has a different story what it might be. Thank you very much


Check your spark plug wires for resistance and or a plug could be fouled or you may have a vac hose off somewhere on the engine. ... Chevrolet Spark

Changed engine in 1996 Chrysler Sebring convertible.. jxi. Ran fine for a while. Problem...the steering wheel spline was not set right...the wheel sets at 1:00 oclock position when going straight Put new battery in unit. Started fine..for a while. I changed the top because the back glass had come loose. Put back together. Then unit would not start without jump. Now will not turn over at all. Battery is fully charged. Ignition key will not return to release position. Courtest lites wor


Spray wd-40 in the ignition lock cylinder and let the spray remain there for few minutes then try to turn the key to off position and see.Turn the key forward one click and pull the key out.Be sure the ignition switch is in t ... 1996 Chrysler Sebring

Car came in no start-doa. replaced distributor pick up assembly. car ran but hesitated between 50-60 mph. replaced wires plugs,cap,rotor button, air filter. car runs, after about 4-5 min. driving car shuts down no throttle. let sit a few seconds, car starts and repeats problem. before tune-up pcm threw a mis-fire cyl#1,cleared code. no mis-fire code no hesitation just shut down problem with no engine lite. datastream shows cyl#1 0 misfire,cyl#2 0, cyl#4,5 &6 show high misfire rate. not famil


Have you replaced the fuel filter? what is the fuel pressure?, this sounds like a loss of fuel pressure issue, that would account for the miss fire codes, to check fuel pressure look at the top of the engine, in the fuel supply pipe that plugs to the ... Chrysler Cirrus

To remove a 1988 mercedes benz 420sel cylinder head which is a V8 do u have to also remove the fuel distribution unit that sits between both cylinder heads together with the water pump etc that is at the front of the engine


The fuel distribution unit(also commonly known as the CIS-e) will need to be removed. try to do this with as little disassembly as possible, meaning; do not take off every screw you see. there are tricks to doing these engines and if you do not adher ... Mercedes-Benz 420-Series

99 jeep grand cherokee 4.7 v8 oil pressure drops from 40 at idle to 0 when given rpms. Will come right back to 40 when you let idle again. I have removed pan and checked screen. It was clean. Original sending unit was leaking so I replaced. Still thew same. I hooked up aftermarket gauge and pressure never goes below 40 no matter what. Hook back up sender and it acts up again. Don't think 2 senders would be bad. Could it be oil in plug in missing up current?


From what you just said, it sounds like the problem may be the dash gauge itself. I have only seen one oil pump act like that (mine) .... in that case the pump drive gear was turning on the shaft and slowing down as rpm increased but that is so rare ... Jeep Grand Cherokee

I have a opel astra 1.8ie 16v, I am currently changing a snapped timming belt, had to have the head redone, got the new head in but the problem is setting the timing, I made sure that the timing marks on the camshafts line up with the marks on the top cover and the crankshaft mark alligns with the mark in the bottom cover, then I put the belt on but when I turn the motor over by hand it still gets stuck like its hitting the valves, is there any way that I can set the timming manually without usi


... Cars & Trucks

Paid $500 to replace fuel sender unit...made car worse....then they replaced fuel pressure system...made car even worse...now they say my head gasket is blown and wanting me to pay $950...can their mi


No their mistakes could not have led to the issue. just their bad diagnostics missed it to begin with. the dealers do not always have the most competent shop. i would usually tell people to stay away from them and use the other shops around. you are ... 2003 Nissan Sentra

Opel corsa lite alternator pulley belt diagram, the one with an aircon and idler pulley on one belt.


... Cars & Trucks

How can I remove my immobilized from my Opel corsa lite


... Cars & Trucks

Cylinder head torque specs for opel corsa 8valve 1.4l 2005 model


Corsa 1.4I Engine code Z14XE 2000-2004\012Bolts must be renewed\012stage 1. 25Nm\012stage 2, + 90 degrees\012stage 3. + 90 degrees\012stage 4. +90 degrees\012stage 5. + 45 degrees\012Sequence\01210 6 2 3 7\0 ... Opel Corsa

I have two sending units on the housing for the oil filter and the top sending unit started leaking real bad. This is on my 1987 S-10 Blazer 4X4 with a 2.8 V-6


... 1987 Chevrolet Blazer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.5798 seconds