Having problems with your Cars & Trucks ?

I have a 1500 Watts audiopipe all power works but blue light is flashing I moved my grownd and remote wire all fuses are good still flashing

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for Cars & Trucks

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a 1500 Watts audiopipe all power works but blue light is flashing I moved my grownd and remote wire all fuses are good still flashing

... Cars & Trucks

2008 Grand Caravan won't start. The lock/unlock and PANIC buttons work on the remote but when insterted into the ignitionn the van does not start. Nothing! Does not make a sound. The interior lights come on the clock still works but that's it. Tested the battery, all good, wire good, checked ALL the fuses and their good. Lights work, horn works, power mirrors work. When the key is put into the ignition and turned I can't put the gear shift in neutral, it won't move. The radio does not work or wi


I am getting hold ligth on on my dash board,when i start the engine,the engine fuse break,i have change the alternator n check all the fuses,if i disconnect the wiring from the alternator the engine runs good,if i conected the wire from the alternator the engine fuses breaks,the hold ligth is still flashing..ty..

There might be a short between the alternater and ground.Check wiringDisconnect battery and alternater wiring from the back of the alternater and with a multimeter check for continuity between the BAT stud on the back and the alternater h ... 1990 Mazda 929

I have a 95 Honda civic. My cig. Liter works but my radio won't turn on no matter what I do. My clock resets every time I get in the car. I've replaced my wiring harness the fuse in my radio is good the fuse inside the car is good. I've even tried to hardwire it to my battery there is a spark when I hook it up. But still no power to the radio. I even tried a completely different radio and it flashed on the turned back off.

... Cars & Trucks

Brake lights will not illuminate when brake is pressed. However, the signals work along with evening lamps as well. They do illuminate with the light switch on, but wont get brighter when I hit the brake. I checked the wires from the fuse box through to the tail lights, nothing seems to be cut. Fuse is still good. I tested the fuse with a test light, and there is current. The brake switches spring in and out fine as the brake moves back and forth. They dont seem to get stuck. I replaced 2 of

I would test the brake light switch. maybe its bad ... 1986 Pontiac Grand Prix

94 Park Ave. Radio and hvac controls won't work or lite up. There is some power in the plug in's. I was programing a remote and was to use ports 4 and 8. I screewed up and got 4 and 16 which blue a fuse. I replaced the fuse but it still won't work.every thing els works. Low coolant lite lites when driving. The radio and hvac controls work I put them in another and they work good. Thanks Bob

... 1994 Buick Park Avenue

I have turnsignals problem on 92 buick lasabre limited i replaced flasher, all bulbs are good. if i manually move the turnsignal lever up and down the bulbs will flash also hazard lights work what else can i check are there any other switches on the steering coloumn. i also replaced a burned out fuse. could there be a short in the wireing. what to do next.

When you say you replaced "flasher" I'm guessing you mean the combination turn signal flasher unit. If the hazards "flash" on the 4 way but the turn signal does not you are looking at a turn signal switch type problem. ... If 4way flashers do NOT wor ... 2000 Buick LeSabre

One highbeam light was very dull like a semi broken wire, so i rewired the bad side to the good side it worked for a couple of flashes to test , high low beam , then no high beam lights at all, are they hooked through a seperate fuse, some kind of module, or something different, low beam works great with the switch but they do not comeon as driving lights any more since the high beams stopped working, their is also a blue light in the middle of my gages, on now, never seen it before, are not the

You have a wiring problem, look up cavalier headlight wiring on the internet, there is a harness connector under the battery that sometimes goes bad, or the wires are broken inside the insulation, usually in the front harness, the head lights hi and ... 1998 Pontiac Sunfire

2000 S10 4.3L Fuel pump stopped working out of the blue. We Put a new Fuel Pump in, new harnes to fuel pump, new fuel filter, new relay, new fuses in IGN C and ECM B fuses. Still the pump will not turn on. We traced the wires and found that the gray wire to the pump is not getting power. Float on pump is working but not the pump itself. We traced it to the fuse box under the hood and tested it the and still no power. Double checked the fuses, Can feel the Relay clicking when key is turned on. Pl

At the fuel pump relay you should have 1 full time hot wire. 1 hot wire when you turn on the switch. 1 ground, and the other wire goes to the pump. Test the ground to be sure it is good. If so then jump a hot to the one that goes to the pump and see ... 2000 Chevrolet S-10

2000 S10 4.3L Fuel pump stopped working out of the blue. We Put a new Fuel Pump in, new harnes to fuel pump, new fuel filter, new relay, new fuses in IGN C and ECM B fuses. Still the pump will not turn on. We traced the wires and found that the gray wire to the pump is not getting power. Float on pump is working but not the pump itself. We traced it to the fuse box under the hood and tested it the and still no power. Double checked the fuses, Can feel the Relay clicking when key is turned on. Pl

Did you verify that the relay terminals have the appropriate signals to them? \015\012\015\012\015\012\015\012ECM fuse B (20-amp) should provide power at all times to the orange wire of th ... 1999 GMC Safari

My signal light fuse kept on blowing so i looked at my switch wires and they were melted so i bought the 400 dollar switch from gm and my lights worked for another week started blowing fuses again now they wont work and my fuse is good checked the wires as well and there still good as well...? please help truck keeps breaking down on me im gettin tired of it... and broke

Do you have trailer light hook-ups? Fifth wheel lighting and brakes, maybe a gooseneck ball? I would start with anything foreign to the vehicle(Not OEM).Most OEM wiring isn't subject to damage without help from you and I. :o) Hate to say it but we (o ... 1995 Chevrolet Silverado 2500

I have a 99 Pontiac Grand am and first when i bought it i didnt know at first but wires for the cooling fans were hard wired and the car almost caught on fire so we tried to get new wires cause the fans were still good but we tried to wire it correctly when we were done the fans would not come on so we were broke down on the side of the road so had to re hard wire the fans to get home and now the fuse panel we think is bad cause the cooling fan fuses and ignition switch fuses keep popping we we

If fuses are blowing then this is a indication the a hot wire is grounding out. Now as for the fan,alot of times what happens is that the sensor that tell the fan to kick on goes bad and someone wires them direct" Bad move " make sure there is no wir ... Pontiac Grand Am

Air bag light flashes, flashes again and than stays on. Thought it was a fuse but that was not the problem. # 22 and #23 Fuses were good and the circuits were good. Still don't know the problem. If anyone knows a solution, please let me know. Thanks

Here is one thing that i do before i remove the dash and connect the air bag light to the oil switch light or the gen light and to check the contacts under the front seats ,their is a connection block and a pyrotechnic connection under the seat ,remo ... 2001 Ford F350 Super Duty SuperCab

The blinkers wont flash. The hazards, head light and brake lights all work. They will flash when moved maunally but other wise they just stay on or dont come on at all. I have replaced the flasher fuse and the switch on the inside of the stering wheel. The bulbs are good and all of the other fuses are good. What now? 1990 Cheverolet Lumina Car 4 cylender

So you have to hold the turn signal switch to get them to blink? If so this is because the switch is shorting out or is not making good contacts and try clean it hope this helps ... Chevrolet Lumina

I have a 97 expedition that has the factory towing pkg. I recently went to plug in my trailer that has always worked fine with this truck and no brake or turn lights but running lights. I checked the fuse under the hood and it was blown. I have replaced it and still no turn or brake lights, just running lights. The fuse is still good, but I replaced it anyways. Still no turn or brake lights but running lights are ok, even with a wire bypassing the fuse under the hood. Now what?

\012put fuse back in (fire hazzard)\012check to see if got a broke wire at the trailer connector\012check wiring under truck at connector see if wire is bad (thats why fuse blown short ... 1998 Ford Expedition

I have a 90 chev 1/2ton the brake lamps are inop,i was towing a trailer and the turn and brake lamps became inop, checked fuses and found turnsignal fuse blown and the brake good,but the brake fuse was a 15amp and some one had installed a 30amp fuse, i replaced the turn signal fuse and the turn signals worked but still no brakes, so i checked the brake switch and found the connector and switch burnt, i replaced the switch and fixed the wiring at the switch still no brake lamps?

Use a test light and see if there is power to the switch. Then depress the pedal and you should have power on both sides. If there is no power to the switch, check the harness from the fuse box to the switch. If it got that hot, it may have melted th ... 1991 Chevrolet C1500

All brake lights out fuse is good and bulbs are good thinks its a ground but don't know where to look. found two wires in back of left rear light. one wire connected to body of truck goes nowhere else just hanging. other wire red connects to female adapter in tail light assemble then deads ends connects to nothing. wired both dead end wires together still have no brake lights. what to do now


On my 1994 plymouth voyager the 3 wire harness to fuel pump (blue wire) doesn't have 12 volts; should it? fuel pump quit then worked once when hot-wired with 12 volts. fuse and relay is good.

The wire should not be hot until the relay is triggered. The relay does not get triggered until the ignition key is turned on. It will run for 3-5 seconds or until the system pressure it at max. ... 1999 Plymouth Grand Voyager

I recently purchased an 01 Passat V6 4motion. The current problem with it is it will not start, cranks fine, but will not turn over. Upon my findings I've noticed I am not receiving power to fuse 28 as well as fuse 29. I have purchased a new fuel pump relay and re-spliced the wires leading into my comfort control module still no luck. When I jump the fuel pump relay, power comes to fuse 28, and 29, but still will not run. ECU is getting power, the 40 amp fuse is good and relay 373 (next to ECU)

... Cars & Trucks

Aldl When jumping pins A to B at the ALDL connector on a 1990 Oldsmobile Cutlass all dash lights and relays flash. Stater has been checked. Stater good. Alternator checked. Alternator good. Wire circuit from ECM thru ALDL to ground good. ECM replaced. Original MEM-CAL re-installed. Same problem. Ground wires checked for good ground. Still same problem. All dash lights and relays go nuts when pins A and B jumped at ALDL connector.

... Cars & Trucks

I have a 98 ford contour and the brake lights dont work. Turn signals, flashers, running lights, and third brake light all work. All fuses are good and cannot determine if any relays are bad. Since the third brakelight still works, I am baffled. FYI- I tracked the wires and found an orange/yellow wire going to third brake light, and Orange/green wire going to rear tail lights. These two wires then run separatley back to the fuse block. Please help! Thanks, Jake

Accoding to my schematic you should be seeing an orange/yellow wire going to the third brake light, and a branched off orange/yellow wire going to the turn signal switches which in turn goes to the BLU/WHT and BLU/BLK wires which control the rear sto ... 1998 Ford Contour

I have a 1996 Dodge Intrepid. I just installed a radio in the car using the Wal-Mart wiring harness, but when I turn on the radio, I have to turn it all the way up to hear the music, and its all treble. There are two wires that are not hooked up from the harness, An Orange one and a plain blue one. I have the remote wire hooked up to the harness (Blue with White Stripe)and all the speakers are hooked up right. But I still have to turn it up all the way to hear any thing. Any Ideas?

That aftermarket radio may require different ohm speakers than whats in the car. open trunk and look at speaker magnets they will have the ohms printed on them if they dont say 4 or 8 ohms then they are incompatable with your stereo and may damage it ... 1997 Dodge Intrepid

2004 saturn ion driver power windows switch will not work. Fuse good and passenger window switch works. The switch unit is good had a new on put on still did now work. Problems seems to be in wiring after the split off to the passenger window switch. No visiable signs of electrical fire the wires look good. What could be causing this problem?

Pull the rubber boot for the wiring harness in the door hinge area. I would suspect cut wires. Have the same issue. Bad design. What else is new. ... 2004 Saturn ION

1999 gmc yukon no power to fuel pump, relay is good checked and tested all fuses i could find. used a ohm meter and checked ground next to pump connection all good. still no voltage at pump connect wondering if i have a broken positive wire between relay and pump do i need to put a ohm meter from relay to pump to check if gray wire is good or is there something else that could effect this? also the pump is brand new. running out of ideas...please help

Anti theft could turn off fuel pump. http://vatspasslockpasskeysecurityhelp.yolasite.com/ ... 1999 GMC Yukon

I have a 97 ford taurus new battery, wire connections ground n hot, new starter still turns slow with help of jump everything checks good i think maybe short in fuse box under hood ? while pressing on box it started fine but now wont if there is a short what would it be the ignition fuse or connections the old wiring did get smoking could this have melted connections in fuse box?

... 1997 Ford Taurus
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.7919 seconds