Having problems with your Cars & Trucks ?

Need to know how much fuel pressure a 95 ford ranger should have . it has a 2.3 liter engine in it also need to know where the cam shaft marks are supposed to be at to time it properly

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for Cars & Trucks

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to know how much fuel pressure a 95 ford ranger should have . it has a 2.3 liter engine in it also need to know where the cam shaft marks are supposed to be at to time it properly

... Cars & Trucks

Can anyone please help me with pics or detailed desription on were the timing marks should be on a toyota d4 3s-fse engine, i need to know how to place the two cams and also the timing mark on the cam timing belt gear and crank mark. The cam gear has a mark through a hole on the spoke and also has a mark on the gear that could be lined up on the cam back plate, also the two cam shafts have marks on them gears two dots and at 180 degrees has a single dot which dots does one use, and which cam mar

Welcome to FIxYa.com\015\012\015\012 \015\012Need the year and model and size as in liter engine in order to look this up for you to send pic and info. Engine number does not work in Alldata, Lee ... Toyota RAV4

You are changing the timing belt and you need o know where the timing marks are for the cam shaft and the crankshaft on a 1994 corolla Also how do you align the marks to put engine in time?

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1994 Toyota Corolla. Plus additional Instructional and Directional Diagrams.Let me know if this helped, or if you have ... 1994 Toyota Corolla

I have a 1989 dodge colt with a 4g15 engine this is a 1.5 litre, i just repair the engine because the timing belt fails, but i need to know the timing marks to sinchronize the crankshaft with the camshaft, the cam pulley has a mark but i dont know the aligning mark that sinchronizes with the cam pulley i need a diagram or something please help me

... 1991 Dodge Colt

I need to know the marks on the crank shaft and the cam shaft positions when placing the timing belt on and if there is clearance between the top of the piston and the valve. this is for a Totota Camry 1998 with a 2.2 L engine.

The pistons dont hit the valves on this engine so if the belt broke you should be able to just replace it. I cant remember the timing marks off hand but the crank definatelly has a notch that lines up with a mark on the timing case. I think under the ... 1998 Toyota Camry

1988-1993 ford festiva leaking oil around the crank pulley... could the oil be coming out of timing chain seal... are could it be a the seal on the crank shaft.. if so would i need to removle the engine to get to the seal?? also found out they may be cam shaft seal.. could oil be coming from that one...i do know that the leak is down low somwhere

This sounds like the crank seal, the engine doesnt have to be removed, in order to get to seal is like replacing the ttiming belt, and once in the timing belt i would replace the crank and cam seals, also do the timing belt, and maybe the waterpump, ... 1993 Ford Festiva

Timing a 2001 saab se 95 v6 turbo.do not have timing tool, and new belt only has 5 white lines.one for each cam cover mark and one for tdc. crank mark...problum is the cam gears have 2 markes each, which mark do i use on each cam to align with cam cover. 8 to chose from only need 4.i know a change was made on the timing on these engines in 1999.????

... Saab 9 5

Hi, I have a 2004 chevy Aveo with a 1.6 liter engine, have timed the crank and cams per timing marks but the pistons are clipping the valves. Have verified the marks are lined up, I need some exact timing references maybe the cam timing by their timing in degrees etc. any help would be greatly appreciated. Also the head has been rebuilt by a reputable machine shop, head has new valves. Thanks Bill......

Sounds like you turned it over with starter motor instead of by a rachet for the first 360? to make sure that the valves cleared ,another reason could be the valve seats were not lowered when the head was skimmed ,have you used the correct to lock ca ... Chevrolet Aveo

92 dodge dakota with 2.5l engine. i kneed to know where cam marks are to set timing belt properly

... 1992 Dodge Dakota

The timing belt has about 15 teeth stripped off of it and wont turn cams. I am installing a new belt and hoping that no valves are bent, but I think this is an interfearance engine????? I also dont know where the cam timing marks are. I see the crank mark on the plate behind the crank pulley.

My sincere apologies for the delayed response.I have only been a free contributor to this site for the last 4-months. I am personally going back to answer your unanswered questions.I do not know if you still need thi ... 1998 Acura Integra Type R

Timing ---- # 1 up on compression, the damper has 2 marks on it. which is the proper one to use? i know with the timing cover off, the second mark lines up with the notch, when all gears are lined up. the distributor also has the 6 to line the rotor to as well. i need to know, which line to use on the damper thanks

The easiest way I found is to take out #1 plug jam a rag in the plug hole with a sccrewdriver tight and tap the starter around until the rag pops out then move the engine the rest of the way by hand I looked for whatever information I have on that an ... 1996 Chevrolet Blazer

I have a Subaru Van 700 and the Cam belt had broke . I found the timmig marks on the pulley of the can shaft and set it to tdc and fit new belt but no luck . After o long time trying to start this engine I have to remove the valve cover to set the valves overlapping then it started but lack of power. How can I know the true mark of the can shaft becouse the marks on the can shaft pulley is wrong. Thanks Vincent.

Hello ,,my advice to you is to purchase a Chilton or equivalent service manual for your vehicle, all the necessary information to service most any problem can be found within the pages, these manuals can be obtained from almost any parts suppler at ... 2005 Subaru Outback


... Cars & Trucks


The timing is set to 8 degrees at 700 rpm...if it helps any ... 1984 Chevrolet S-10

I need the timeing marks for my 93' accord lx engine 2.2L f22a i4 when i reset the imeing in it last time i made a major repair i set it wrong and now i need to replace my crank bolt and get mt crank shaft machined cause the threads got shreaded, any help ill be apreciated, i live in oregon so if you know any where i can get the crank and bolt machiend that would help to thanks

There are alignment marks on the oil pump cover to line up with the marks on the crankshaft sprocket and on the balance shaft just to the left and a bit higher than it (marks on the cover line up each with the mentioned shafts).\015\012If ... 1993 Honda Accord


... 2004 Mazda 6

Rebuilded a 2.0 1986 inline 4 cyclinder dodge ram 50. Need to reset the cam shaft to the crankshaft for the timing. The cam shaft timing mark is 90 degrees and facing left of the crank shaft. What is the position of the cam shaft timing mark to the crankshaft?

My sincere apologies for the severly delayed response.I am personally going back to answer your unanswered questions. I do not know if you still need this information, however I am answering it in case you still do. ... 1986 Dodge Ram 50

I changed the water pump on my 1997 VW Jetta GL 2.0L engine. The timing slipped and I dont know how to get it back in time. Can you tell me where the timing marks on the cam and the crank are supposed to be lined up at?

Bring the #1 piston (first spark plug hole..all the way to the left) to TDC (top dead center), check by removing spark plug wire and plug and then turn over the crank by hand with finger over hole. When air hisses out, carefully place in ... 1997 Volkswagen Jetta

I need to know how to find and align the crank and cam timing marks for a 1989 plymouth 2.5 4 cyl. Engine. I had to replace a broken timing belt and am ready to install after I align the timing. Thx.r.

Auto Zone has a "Repair Guide" section in its on-line web page that is equivalent to a Haynes repair manual and it's free. ... Cars & Trucks

1998 DODGE STRATUS ES V6 2.5L - Replaced water pump, made sure nothing moved, crank shaft and cams. put everything back on and engine would not turn over. pulled all the belts off even timing belt and try to turn to crank shaft. the crank shaft would only turn haft way and sound like it hit something. I line all the marks on the cams and crank shaft and put the timing belt back on, then try to start it. the engine turn over two times and lock up. there is nothing in the cyclinders, all the valve

... Dodge Cars & Trucks

I have a 1995 Mercury Grand Marquis with a 4.6L SOHC engine and I need to know how to line up the timing marks so both cams are in time.

Best bet for you is to purchase a vehicle specific repair manual from your local auto parts store.It will contain all the needed information to complete this task. ... 1995 Mercury Grand Marquis

Trouble replacing timing belt ... setting timing need to know how to line up the marks on the camshaft pulleys with the camshaft and balance shaft .. 1996 hyundai sonata GLS 2.0l DOHC .. gasoline engine

Sorry for the severe delay. I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.Click on the following direct ... 1996 Hyundai Sonata

Need picture of how the timing belt goes on a 2001 ford laser twin cam 1.6L engine. timing marks would also help

... Ford Laser

How do I find the timing marks to time a 4-cyl 93 Caravan engine? I have the crank gear and camshaft gear already exposed and new belt already on. I need to know how to align it to the proper position.

The crankshaft gear has a center punch mark on gear and the intermediate gear has a line mark on gear. Rotate the crank until the #1 piston is top dead center. In doing so the crankshaft mark should line up with the intermediate gear mark. (crankshaf ... 1993 Dodge Caravan

I need to know witch tining marks do i line up with the timing mark on a 95 tracker the I or E on the cam shaft

Click on the following free, direct Link. It has the Timing + Marks: Belt Diagrams, including for your 1995 Geo Tacker, 1.6L SOHC 4-Cylinder.\015\012 \015\012Let me know if this helped, or if you have add ... 1995 Geo Tracker
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 5.0703 seconds