Having problems with your Cars & Trucks ?

07 chevy uplander how to replace turn signal bulb

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for Cars & Trucks

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a 2002 Chevy Venture. The front driver side signal does not blink but it is illuminated, the passenger side turn signal does not come on at all. I have replaced the bulbs and bulb sockets, and

... 2002 Chevrolet Venture Passanger

How do I find and replace the turn signal fuse on my 97 chevy s-10? The hazard flashers work fine, but the turn signals have stopped working. Doesn't seem to be an issue with burned out bulbs, so I'm assuming the turn signal fuse is bad. Can't find it on my truck.

Look in driver side, on side of dash) there is a small doorand look for the fuse must be 20 or 25v. God luck ... 1997 Chevrolet S-10 Pickup

88 Jeep Cherokee, left turn signals don't work. Right signals flash as they should. Emergency flashers work as well. When the left turn signal is activated, the dash arrow lights up, the front bulb lights up and the rear bulb lights up but the flasher doesn't click. The flasher was replaced to rule it out and because it is easy, the left rear turn signal bulb was replaced and the front bulb was checked. It seems to me then next item to replace would be the turn signal switch. Any thoughts?

... 1988 Jeep Cherokee

How do you replace the front bulb socket (for turn signal) on a 2003 Chevy Venture?

... Cars & Trucks

I have a 2002 Chevy S-10. The right rear turn signal doesn't work. Neither does the brake light. The running light works. I replaced the bulb, and still, doesn't work. What could possibly be the problem? The right front turn signal works great, mach speed in fact, the rear, not so much. All wires are fine. Please help!!

You probably have a burned or melted bulb socket connector where the bulb actually plugs into the socket and it is preventing the bulb from making contact with the socket connector. Look into the socket and see if you can see the connector recessed o ... 1997 Chevrolet Blazer

I replace Rearlight bulbs Now both turn signals go off and my dashboard turns on and off with the signal. The fuse is good. 93' Chevy cavaler

Incorrect bulbs ... Chevrolet Cavalier

Left turn signal will not work on Chevy Impala 2006. Flashers work, Right Turn signal works. Replaced Front Left and Left Rear Bulbs and fuse. still does not work. HELP?

... Cars & Trucks

I have a 2001 chevy cavalier and the turn signals will not work I have replaced the bulbs the flasher the fuse and the whole switch assembly in the steering wheel nothing works. I have brake lights and four ways they work fine just no front or back turn signals. I had someone look at the wiring and they tested it and said it's not that. I'm lost as to what else it could be. Anyone have any ideas at all??

... 2001 Chevrolet Cavalier

How to replace turn signal bulb located inside the driverside mirror in a chevy avalanche?

... Chevrolet Avalanche

Replacing turn signal bulb on 99 chevy cavalier

... 1999 Chevrolet Cavalier

How to replace turn signal light bulb on a 1993 chevy corsica

... 1993 Chevrolet Corsica

I replaced a turn signal bulb and it is still blinking fast. All blinkers are working but the right side, where the bulb was out, is still blinking too fast. It is 1999 Chevy Cavalier

It sounds like you have the wrong bulb in the right side which will cause the relay to heat too quickly and cause rapid blinking. ... 2005 Chevrolet Impala

1998 Chevy Silverado 1500 Brake light fuse blew, replaced, fuse blew again, replaced relay and fuses. both under hood and in side fuse panel. Fuses keep blowing on turn signal and brake lights. Checked wiring for shorts, bulbs, connections etc. Any ideas??

You obviously have a short to ground on one of the wires to the back (if it was the front the brake shouldn't blow the fuse). the most common problem is usually in a trailer light harness. if you look under the drivers side rear of the truck, down un ... 1999 Chevrolet Silverado 1500

I have a Chevy 2500 4X4 with brake lights not working. I have all other lights working. I only have one brake light working when I turn on the right turn signal then my left brake light will work. What's wrong here? I keep tracing the wires and don't know what to do from here. I've replaced the brake pedal switch, all bulbs.

What year?Sounds like a turn signal switch. Earlier models would use the same bulb for the brake and turn signal. The turn signal switch will interrupt power to the brake light and route the signal to either the left or right bulb dependi ... Chevrolet 2500

Replaced our headlamps on 2004 chevy malibu..the turn signals are not working all the time. It seems as though the connection between the bulb and the headlamp assembly may not be tight enough. They

Also always insure a good ground ... Cars & Trucks

How to replace a rear turn signal bulb on a 1995 chevy Cavalier

Open your trunk look in the corner remove the nuts then replace bulb ... 1995 Chevrolet Cavalier

2005 chevy cobalt back turn signals work fine front will not work and replaced bulbs still not working

... 2005 Chevrolet Cobalt

1997 Sunfire GT. Right, left, and spoiler brake lights not working. Rear left and right turn signals not working either. Both front turn signals work, but they blink quickly as if a bulb were out. Headlamps both extremely dim, and I only have use of Parking lights when driving. I first inspected the fuses on the inside console. They looked to be ok, looked at bulbs, the filaments seem to be ok, but grease where the bulb is plugged in is dried up and hardened. I replaced the turn signal switch

Replace the turn signal switch. All of these lights run threw it. ... Pontiac Sunfire

My front left turn signal will not operate and I have replaced the bulb. All other light bulbs are working on the vehicle. The right side turn signal works fine.What do I need to check or replace?

That is a wiring problem or corrosion in the socket. make sure the socket is clean. then test with a multi-meter while the left blinker is on, if you have voltage then it is the light, if no voltage is present, ... 2004 Mazda 6

The rear turn signals on my 2005 Chevy Aveo aren't working. First one stopped, then the other. It's not the bulbs and I replaced the switch in the column, plus the relay in the fuse compartment. What gives?

... 2005 Chevrolet Aveo

07 chevy uplander how to replace turn signal bulb

... Cars & Trucks

Replace a rear turn signal bulb in 2004 chevy cavalier

... Cars & Trucks

I need to replace the fron turning signal bulb on my 2004 chevy g van

Go to walmart pay $5 for installation plus the cost of the bulb ... Chevrolet Sportvan

Front turn signal does not work even after replacing the bulb. Sometimes it will work and just as quick it will stop working. What can be the problem? I have a 2005 Chevy Malibu LS.

Sounds like you might need a new switch in the steering column for the turn arm ... 2005 Chevrolet Malibu

How do i replace the front turn signal bulb on my 2008 chevy uplander it looks like I need to remove the front lamp assembly first. I got two of the connections off ( the bolt on top and the locking pin near the front of the car. Am I on the right track?

To get at the turn signal bulb, you gain access to it by first removing the headlamp housing which is directly above it. Remove the top bolt and locking pin (as you mentioned), then remove the headlamp housing by pulling it (or pushing it from behin ... 2008 Chevrolet Uplander
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.2387 seconds