Having problems with your 2010 Hyundai i30 2.0 ?

Rearview mirror rear view mirror is vibrating.I have taken mirror from spring mount and still get the noise which is coming from the base that is glued to the glass. the only solution to me is having to remove base that is glued on and reglueing it how do i do this. i think there may be a bad bond which is causing the vibration.

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 2010 Hyundai i30 2.0

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Rearview mirror rear view mirror is vibrating.I have taken mirror from spring mount and still get the noise which is coming from the base that is glued to the glass. the only solution to me is having to remove base that is glued on and reglueing it how do i do this. i think there may be a bad bond which is causing the vibration.


... 2010 Hyundai i30 2.0

I need to remove the side mirror to deal with the corrrosion on the base. How do you remove the mirror housing from the door? It appears to be bolted on from the outside, however I cannot see any obvious way to remove one of the halves of the housing to get at the bolts!


If it's like a 3 series, Pop off the plastic triangle piece from inside to expose the bolts and wiring harness. ... BMW Z3

How do I get access into the inner side of the passenger door of a 1999 suburban 1500, in order to change out the side view mirror? If that is too difficult, can I just exchange the black plastic cowling which protects the mirror? I already have the complete replacement mirror. The only part which needs replacing is the plastic protective piece, but I cannot remove the new one from its base? I have taken the new one apart and removed the 3 support screws in the back of the plastic but it still w


You'll need to remove screws that are by the door handle,\015\012arm rest, under door and side of door and then gently pull back on the\015\012panel as there will also be retaining clips attached and you don't want\015\012to break them. You'll need t ... 1999 Chevrolet Suburban

The rear view mirror on my 2001 forester came off the windshield and i can't figure out how to remove the mirror from the base to re affix it. I took it to a garage and they couldn't figure it out either. Obviously, due to the weight, i need to glue only the base until the adhesive is dried. Any ideas?


I am pretty sure it just slides off as a tight fit. ... Subaru Forester

How do i remove the mirror from my bmw 1997 318i? It has already fallen off, I can not figure out how to remove the mount from the mirror to reglue to the windsheild.


... 1996 BMW 318

Removing the exterior plastic from my mirror base.


PAINT ... 2001 Mercury Cougar

I too am having a problem removing the small metal piece from the back of my 2002 pontiac grand prix rear view mirror. It fell off the windshield due to the heat, I'm supposing. It has the Onstar equipment in it and is very heavy. I have not been able to remove the metal slide to reglue it to the windshield. I read where it was stated to use a 'hammer and a drift' to remove the metal piece, but I don't want to pry too hard, as I'm afraid of breaking the plastic housing. Can you tell me whic


It should be the same as the ones from the late 90's. You have 3 pieces there. The metal piece comes out the bottom of the mirror and should have a piece of plastic attached to it. It is a friction fit with the actual mirror so it shouldn't require a ... 2002 Pontiac Grand Prix

My 2004 acura tl inside, auto dimming, rear view mirror has mal-functioned and now everything is blurry when viewed through it. i've ordered a replacement mirror thinking i could replace it myself. i'm not sure how to do it, since there is an electrical connection in the overhead console. I'm also not clear on how to remove the existing mirror. Any suggestions?


... 2002 Acura 3.2TL

Reglue the rear view mirror. How do I remove the metal disc to glue on the window? Every other one I've done their was a set screw. When you remove the screw the small metal seat slides out. This one is like nothing I've ever seen. I can't figure out hoe to slide it out withou breaking something.


They changed it. You have to slide the mounting bracket out the bottom of the mirror case.It's a tight fit but the mirror assembly will slide off, toward the roof. Once you have it off you will see a small slot on the bottom of the mounting bracket. ... 1998 GMC Jimmy

I have a 2006 Passat and everytime I drive it the windows fog up, any solution. I went to my local vw dealer and they have not heard of that happening before. But there solution was put rain x on the inside of the windows. I did of course and it srcewed up the windows. I think I will try vinger to remove it.


I had this problem too. this is very annoying, and also a safety hazard. After a lot of investigation, and a few trips to the dealer, the cause was determined to be a non-functioning recirc door. recirc door was stuck on, and humid air from the car ... 2006 Volkswagen Passat

The inside rearview mirror fell off my 1999 Buick Century. I have the adhesive but I caanot figure out how to remove the base from the mirror so there is very little weight pulling on the adhesive while it cures.


I have the same problem. Had to cut the wires to the lights in the mirror so I could stop it from dangling down. After that I did figure out how to just unplug it, but, there ain't no set screw on my mirror and I'm at a loss how to get the attachme ... 1999 Buick Century

Can not remove the alternator on my 2001 Santa Fe The main pivot bolt at bottom of alternator seems to be long and can't be pushed back through the hole in alternator base enough to allow the alternator to drop down and be removed. Th square nut at the back end of bolt hits on the differential case. Is there a solution for my problem that I can't see. Bob M.


The mounting bracket where that long bolt goes through is slotted. By loosing the the nut on it slightly, then ply the alternator up out of the mount( nut and bolt still attached to the alternator ). ... 2001 Hyundai Santa Fe

Canadian Focus 2005 ZX4.- how do you replace just the plastic back cover of the side mirror. It clips on easily enough, but i think you need to pull out the mirror glass to release the clips to remove it. Is that correct?


No you just squeeze it around the edges to unclip the wedge shaped holding mouldings in other words when its on you will break it to take it off... ... 2005 Ford Focus

Hi, I have a 2006 toyota corolla. How do I get access to the fuse box under the passenger side dash of the car, I think it is behind the glove box ?, this is what the manual points to. if so, do I need to remove the glove box to get to it or is there an easier way ? I have lost power to my radio and auto rearview mirrors. I have checked the fuse box under the hood, and all fuses are ok there. So I'm stuck not sure how to access the fuse box in the car ? If I have to remove the glove-box


The interior fuse box is located on the left side (driver side) end of the dash, it is behind a small access door. ... 2006 Toyota Corolla

My son was trying to re-attach his rearview mirror to the windshield of his f150 pickup using Loctite rear view mirror adhesive. When re-installing the mounting piece, he mistakingly glued it on backwards. Is there any way to remove this glue without breaking the glass? The instructions on the glue say no. He's just learning to drive and maintain his own vehicle and is quite upset at his mistake. Any suggestions?


My experience with that would be to use a hot air gun or a hair dryer (would take a little longer) to heat up the mounting piece, then carefully use a razor blade between windshield and glass to remove the adhesive. Be Extremely Careful. Razor Blade ... Ford F-150

My 2001 Lincoln Continental displays "Door Ajar" when it rains, leaving all the interior lights on, until you remove a fuse, or disconnect the battery. About 2 days after it stops raining, the problem goes away. I think water is getting up in there. About that time, the electric seat on the driver's side quits working, and so do the electric mirrors on both sides. In the past, changing the fuse helped, but that didn't help this time. The seat and mirrors still won't work.


You got wiring problems this is very serious take your car to shop asap before you go up in flames ... 2001 Lincoln LS

How to you remove the base plate of a rearview mirror in a 1995 GMC Sonoma?


It has heat resistance glue, you need to get some sort of compound like goo gone or something to start dissolving the glue ... 1995 GMC Sonoma

I have a 2004 coupe v6 - i've managed to dislodge my rearview mirror, it's not broken but came away from the w/screen.It seems nigh on impossible to remove the part still attached to the w/screen to then feed the screw back through to sort it ? - can you please help, keepers of all sacred knowledge hyundia based...


Didn't understand a word you wrote except 'it's not broken but came away from the 'w/screen'. hmmm... you 'managed to dislodge the rear view mirror'... why would you want to do this?\015\012Tell you what, take the vehicle into an authorized Hy ... 2005 Hyundai Tiburon

Renault Modus Oasis 2006 - Brake light out - Have removed the holding bolt for the light cluster but the unit wont pull out - With the bolt out the unit becomes loose on one side only - I've tried pulling it and think there is a guide pin which is stuck - What's the solution??


... 2006 Renault 181

ABS light Someone suggested to go to a dealer and take care of it. Why didn't I think of it? Such a simple solution... But I don't have the time right now to do it... in the meantime I like to disconnect the ABS light. I removed the ABS fuse and the ABS relay, and it did not help. Anyone knows how to do it? Thanks for your help. Best regards, Ben Neiger


Well, the dash will display the abs warning for as long as there is a fault in the ABS system. You can pull the fuse for the ABS as you've done but all that does is turn off the ABS system, which in turn triggers the light on the dash to warn you to ... 1998 Volvo S70

How do I remove the metal button from the rear of the interior rear view mirror on my 99 olds Aurora so that I can reglue it to the windshield and then reattach my rearview mirrort?


From the OUTside of the car, using a heat gun, heat the glass to soften the glue, then take something like a paint scraper, and work around the edges, until it gives up. Don't superheat the glass, just warm the general area back and forth over the m ... 1999 Oldsmobile Aurora

2004 Chevy Surburban. The driver side mirror will not work using the switch on the door. Also the auto lock has stopped working. I think I have to remove the inside door panel to check the wiring.


On todays newer vehicles, the drivers side controls are contained within an electronic "control module". If only certain functions have stopped working, you are correct, the door panel will most probably have to come off. This will be followed by the ... 2001 Chevrolet Suburban

The previous owner of my car, made a mistake and glued the inside rear view mirror bracket on the wrong way. I like to know how can I remove it, to correct the problem?


Hi,To Remove the Rear View Mirror, place a piece of emery paper on a hard flat surface and rub the mirror \015\012base base across the surface.Let me know, if needed further assistance.Hope i helped you. ... Pontiac Sunfire

How do you unplug the mirror light wire on a Chevy S10? WE need to remove it to reglue the assembly to the window.


It's just a push up clip. use a small screwdriver or a thumb/fingernail to pick up the retainer, and push back. ... 1998 Chevrolet S-10 Pickup

Remove rearview mirror 2012 yukon - 2012 GMC Yukon Hybrid Base 4dr SUV 6.0L V8 Hybrid 4-speed Automatic


Should have a screw that goes into the metal piece on the windshield, after screw is loosened enough or completely removed the slide the mirror bracket up the windshield towards the roof. ... 2012 GMC Yukon Hybrid Base 4dr SUV 6.0L V8 Hybrid 4-speed Automatic
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.7784 seconds