Having problems with your 2006 Pontiac G6 ?


\015 ARM WONT STAY DOWN ON LEFT SIGNAL\015 Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 2006 Pontiac G6

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Turn signal periodically the turn signal will stop working. When the truck is first started the turn signals will work fine. After 5 or 10 minutes of driving the turn signal will stop working. The interior indicator will stay solid as will the exterior turn signal lights ( all lights work). We have replaced the fuse and the turn signal switch.

Now replace the flasher unit! Frankster016 ... 2002 Nissan Xterra

I have a 2000 dodge grand caravan and the turn signal just do not work the hazard lights do and when I click for the turn signal I do not get any clicking sound whatsoever. I cannot find any fuses that are labeled turn signal or flashers only the hazard fuse is a while back before the turn signal stopped working altogether they would not work when the vehicle was cold once it started warming up then the turn signals work but now they don't work at all is this a fuse issue or is it the whole tur

Blown bulb ... Cars & Trucks

Turn signals work strange. break pedal causes right turn signal to come on solid (no flashing) and left turn signal causes hazards to flash. Hazards work fine. symptoms change but always a problem with either the left or right signal working, not working, or causes hazards. sometimes they work until I hit the break pedal. all turn signal lights appear to be working and all fuses appear to be fine...

Replace the bulbs, these bulbs are dual filament bulbs so half of the bulb is bad. ... Cars & Trucks

When i turn the igniton key to on the fuse for the heater/ac blows.at first the turn signal stoped working when the heater /ac fuse blew. I replaced the fuse. the turn signal and heater worked for 2 days then the fuse blew. I removed the fuse for the heater/ac and the turn signal worked for a day. now the turn signal does not work and when I turn the ignition on the fuse blows immedietely. I downloaded a fuse box diagram from wjjeep.com/fuses and it states that fuse # 20 10amp controls ignition

The ignition run is to the ECU or Engine Control Unit. And the blinker sense is for the blinkers to chime when left on for more than one minute. Finding these kinds of problems are very hard. Because from what you said earlier that it ran for 2 days. ... Jeep Grand Cherokee

I have a 1999 Nissan Quest, I've been having problems with my turn signals. It started out with the flasher buzzing but the turn indicator would work. Then they quit, I put a new flasher and turn signal switch on it and it worked for a short time then wouldn't work at all. I did some new ground connections and it seemed to work but then again they would stop working. This last time I noticed that the warning flasher wasn't working but the turn signals were, now they aren't working again. Any sug

Go here and read files\015\012\015\012http://groups.yahoo.com/group/villagerquest/\015\012\015\012we will help you with our team. free ... 1999 Nissan Quest

All lights work and brake light at top works. brake lights on bottom left and right don't work. It was hook up to trailer wires connection. going down the road and when you turn on the right turn signal the cruise control would go off. the brake lights would come on but the right turn signal would stop working. as soon as you let off the brakes the turn signal would work again. I took the trailer connections off and replaced brake fuse and they still don't work.

Check a few things...\015\012- The bulbs\015\012- Check for ground at brake lamp connectors\015\012- Check your wiring at the connectors for power\015\012- Check for another fuse blown \015\012- Do not hook up the traile ... 2000 GMC Safari

The turn signals on my 2001 jeep grand cherokee laredo do not work. the hazard lights work but the turn signals do not. they both work off of the same fuse in the fusebox and off of the same turn signal relay. I would assume that if either of those items were the issue that both the hazard lights and the turn signals would not work.

... Jeep Grand Cherokee

I have a 91 acura integra part of the harness that connects to the cigarrete lighter , stereo dome light and turn signals burned . . i re wired most of it but im having trouble getting my turn signals/ corner lights to work , i made my corner lights work but the turn signals dont work it wont blink on the cluster or out the corner lights just stay on when i turn on the head lights . . what color wires lead to the turn signals under the dash?

... 1991 Acura Integra Hatchback

Installed LED Halo Projector headlights in my 05 Impala but encountered an issue. The front left and right turn signals fo not work. All other lights work. When using the turn signal the indicator and rear turn signals blink really fast. The bulbs do work. Wiring- the power cable that runs fro, the hi/low beam is connected and linked into the cars headlight connector (power cable- yellow wire) the turn signals have a harness that connects to the stock harness coming from the car. Any clues,

... 2005 Chevrolet Impala

I have a 1992 Chevrolet Corsica LT. I'm having trouble with the turn signal's. I've checked every bulb, socket, and ground wire. I've replaced the fuse, flasher and the turn signal switch. All the other light's work fine including the parking light's, brake light's, and 4 way flasher's. The turn signal's still don't work, not even the light's in the arrow's in the dash don't work for the signal's but DO work for the 4 way flasher's. I could really use some help here.

DID YOU REPLACE THE BULBS ... 1992 Chevrolet Corsica

My left turn signal will not work at night when the lights are turned on. The left signal works in the day time. When you manually turn on the lights in the day the left signal quits working. It seems that when the parking lights are on, the L-Signal quits working. Thank you .

Head lamp switch bad /back feed so to speak ... 2005 Chevrolet Impala

After towing another car quite a distance with the hazard lights on, the next day the turn signal werent working. i was told to change out the signal switch on the steering wheel so i did but a new one didnt make the signal work. then i checked the fuse and bulbs and those were fine as well. the parking lights and everything on that switch works except for the turn signal itself. so i called auto zone and they told me to look for the turn signal flasher box nside the glove box but could not find

OK, you've been thru the wringer. Unf, i cannot find info on where your flasher is, but there are a couple common places to check. It's usually under the dash on the driver's side. Sometimes it's plugged right into the fuse box. Other times it's ... 2004 Pontiac Grand Am

I have a 1977 Mercury Grand Marquis the turn signals, brake lights, and turning lights do not work. The running lights and hazard lights do work. I checked the bulbs and the relay can for the turn signals and all work. I had a shop look at it and they couldn't find anything wrong. Is there a third relay that controls the turning lights? I haven't found anything so far that would explain this. The turn signals and the other lighting quit at the same time.

Turn signal switch (also brake light canceling switch) most likely bad or bad wire to it or from it. Check, with key on run, for power into switch. Turn switch on, check for power out. No power out switch bad. Power out, trace to rear tailight harnes ... 1977 Mercury Grand Marquis

My right turn signal isn't working correctly. When I'm driving down the road my dashboard indicator for my right turn signal will turn solid green but wont flash, But when i turn my headlights on it will stay solid green even if i have my left indicator on and flashing when turning left or changing lanes, but neither of the two lights that are meant for the right turn signal wont even turn on if the headlights are on. But they will work for hazard signals but if the headlights are on the

I had the same problem on a 92 & 95 Dakota years ago, replaced the turn signal switch in the column & found a loose ground wire in the harness back by the tail lights. Never had a problem again. If you're gonna try to replace the switch you will need ... 1995 Dodge Dakota

My parents are repairing a 2003 kia rio that had been slightly wrecked. He is having an issue with the turn signal switch. Here is the email they sent me. I sure hope you can help. ,........i cant get the turn signals to work on the car the hazard lights work but not turn signals with the handle i have checked bulbs and fuses we put a new turn signal and hazard flasher thing in it and it wasnt that with the cover off i can turn the signals on by hand if i hold it over but not by handle see if th

Since the lights themselves work there is not a power or fuse issue. Therefore it must be at the switch, which leaves either of three options:\015\012\015\012Least likely: Turnsignal stalk is not getting power, which comes ... 2003 Kia Rio

Left turn signal only works with headlights off. A closer look shows that the left turn signal switch flashes the left headlight instead of the turn signal lamp. When headlights are on the left turn signal doesn't flash anything. The right turn signal works fine

... 1990 Mercedes-Benz 190

Turn signals Left turn signal turns on flashers. Even with the key off and out of the ignition. Replaced Multi switch and combination flasher. After flasher was replaced it worked fine for about a week. Then the flasher thing started. Flashers work fine, right turn signal works fine.

Replaced turn signal flashers and muti switch turn signal still won't work Why? ... 2000 Jeep Grand Cherokee

Right turn signal stopped working months ago. When I put the hazards on, only left side worked. Now left side working intermittently. I wiggled the wires to the turn signal switch and the left side is working again. Not sure what to change...turn signal swith or flasher relay???

... 1989 Mazda 626

The Left turn signal is not working. I have replaced the bulbs and the turn signal lever/light switch mechanism but still only works after turning the flashers off and on with the left turn signal on but it only works for awhile. Any suggestions?

It sounds like the flasher itself. It's usually located under the dash. Good luck ... 2000 Jeep Grand Cherokee

Turn signals all my lights work, but my turn signals do not work at all... flashers work. turn signals don't. all other lights work. fuses good. bulbs good.

Could you please rqate this, thanks ... 1995 Ford F150 Styleside Regular Cab

I have a 1990 full size ford Bronco. The rear right turn signal went out and I replaced in and it still did not work but the rest of the turn signals worked. I then took it to a shop and they looked at it for twenty minutes and could not figure it out. When I got home the rear tail lights brake lights , turn signals (all one multifunctial bulb) would not work and also the back up lights. Also the front blinkers will not work now. I have tried the fuze and that is not the problem. I don't think

... 1990 Ford Bronco

I had a 2" ball for towing a boat installed on my 2009 Nissan Frontier. The boat dealer hooked the trailer up and the turn signals don't work on the trailer. He then tested it on his truck (GMC?) and the trailer turn signals worked fine. Went back to where we had to towing ball installed and that juice it getting to all necessary areas. Our truck turn signals had also stopped working for awhile but then starting working (something about a relay or delay). Do you have any idea what the probl

On older vehicles a tow harness could be wired directly to the vehicle wiring. On newer vehicles like yours, you need a module installed between the vehicle wiring and the trailer. Reason is that the original signal flasher (bi-metal type) has been r ... 2008 Nissan Frontier

I have a 1990 full size ford Bronco. The rear right turn signal went out and I replaced in and it still did not work but the rest of the turn signals worked. I then took it to a shop and they looked at it for twenty minutes and could not figure it out. When I got home the rear tail lights brake lights , turn signals (all one multifunctial bulb) would not work and also the back up lights. Also the front blinkers will not work now. I have tried the fuze and that is not the problem. I don't think

... 1990 Ford Bronco

On my 2003 cadillac escalade the left turn signal works sometimes and sometime it wont flash or it just dont work at all. Even when I turn on my emergency flasher the only flasher that works is the right turn signal and not the left. I checked the bulb and the fuses which the truck mannuel states this might be the problem and nothing is wrong with the left flash fuses or the left bulb for the left turn signal.

... 2003 Cadillac Escalade Ext

Need help with re wiring the right turn signal in the rear of the jeep. The turn signal is wired to the front turn signal and doesn't work. The right front works when you turn it on but the right rear doesn't. How do I wire it so that they both work?

Hi,\015\012 I'm more interested in why you're having to do this in the first place. Does your right brake light work?\015\012 I would check the original wire for that light (I'm assuming cut) and see if you are getting a signal through th ... 1993 Jeep Grand Cherokee
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.0134 seconds