Having problems with your 2006 Ford Mustang ?

There is no power to start my 2006 mustang

\015 I believe one of the doors was left open for a while draining the battery. I have charged the battery, and still no power to turn on the interior lights when I open the door. It seems like there is absolutely no electrical power at all. What is the problem?\015 Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Easy to fix! you have to put it in drive and have a friend help you push in reverse for about 1/2 mile and it will recharge the hidden capacitors in the onboard computer. If they completely discharge like yours has just recharging the battery alone won't work.
Glad to help!
Repair Help & Product Troubleshooting for 2006 Ford Mustang

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a 1965 6 cylinder mustang and it was running well and recently I was driving and the car started to loose power. It seems like it does not have power i would press the gas and there was no response. I took it to the mechanic and they told me it was the carburator and I had the carburator rebuild by a professional and nothing. the car starts and when you press the gas it idles well then all of a sedden it starts to loose power and shakes. Once I take it out for a drive it drives well but


What needs to be checked and verified is the point gap. And if it is adjusted to the correct dwell, the timing will need to be set again also. Oil inside the ditributor and contaminating the points as well as the condensor is not good. You probably h ... 1966 Ford Mustang

My 2008 Ford Mustang started having problems a couple of days ago. The radio would come on and off, and at the same time the power in the car (lights, windshield wipers, power locks, power windows) would come and go. Now my car will not start and the battery appears to be dead. I try to start and hear the clicking sound. I had it jumped twice today. Both times the car turned itself off after running for a couple of minutes. During this time I couldn't shift the automatic out of park. Please advi


Hi\015\012it sounds like a bad earth conection, check the battery leads and ensure the black earth wire has a good tight conatct to the battery and also a good tight connection to the car body, if the wire is loose then when driving will touch ... 2008 Ford Mustang

1992 4cyl mustang starter went out so i replaced it and when i went to start it the under hood cylenoid also went bad so i replaced it now the car has no power at all to the fuse box? if i tern the key nothing happens at all? no hazard lights no head lights nothing? but if i jump the cylenoid the dash and car then gets power turns over but wont start and the ignition swich is showing power all the way through? any one had this happen or know what it could be?


It can be a fow thing mybe you hock the wire up wrong ! or it could be the cylenoid is bad ! an it could be the safty switch that is in the front set floor on the pasinger side up under the panel by your feet it will be a red button . look over the p ... 1992 Ford Mustang

Battery was completely dead- so I just purchased a new one. The weather had been very cold with plenty of snow 0-25F. Did not attempt to start my car for about ten days but when I did the battery was completely dead. Jump started easily enough, then let the car warm up for approximately 20minutes- took it out for a ride, with the heater and defroster on. After about 20miles of driving 40-50 MPH, turned the headlights on and the car lost all power- including power steering.


That would probably be your alternator. The car doesnt take as much power to keep running as the lights. The lights use alot of power and if the battery is doing the alternators job it drains quickly. The battery is only designed to start the car th ... 2000 Mazda MX-5 Miata

My 1997 Honda accord will not start. It has a brand new battery, alternator is good. My speedometer went from 35 to 100 then to 0. Stopped at auto parts store now car won't start and I can not get power window or power sunroof closed. My headlights work, wipers work, blower works on air conditioning.


By pass the starter motor see the diagrams attached. God bless you ... Cars & Trucks

Key stuck in ignition, no electrical power. I have a 2005 Volvo S40. When I put the key in the ignition I was able to turn it past 0, but upon doing that all power was lost and I was unable to return the key back to the 0 position and the automatic shifter locked in the park position. I have tried moving the steering wheel to all positions and also tried to jump start the vehicle. I am at a loss for what to do and there is no local dealership for me to consult with.


... 2005 Volvo S40 T5

My wife's 1991 Saab 900i starts and runs fine from a cold start but with a "hot" start on a hot day the car will start, but the engine oscillates between 0-2500 RPM and lacks power. In this condition it dies when the accelerator pedal is pressed and is undriveable. After waiting anywhere from 10-90 minutes the car will again start and run OK.


In a case like this you can have allot of thing's going on to cause this, you really need to have the computer control system for the fuel injection tested for trouble codes before u buy any parts, but based on my experience two thing ar ... 1991 Saab 9000

1996 gmc yukon. replaced fuel pump 3 times in 2 months, finally running then it wouldnt start one day. cranked it over for awhile and nothing. sat 15 min it started right up, drove home shut off, then started back up. next day no start. just replaced fuel relay still no start, checked fuel pressure its at 0, is it possible the pump is bad again or could it be the clip for the power to the pump being loose or faulty?


This is a very common problem. GM has issued a service bulletin to replace the wiring connector at the fuel pump assembly on top of the tank. check the end of the plug for burnt terminals. the service bulletin states that these corroded connectors ca ... 2000 Chevrolet Tahoe

What would happen if diesel fuel was put into my 2005 ford mustang gt? I'm not sure if that happened or not but it was slow to start and 2-3 miles from the gas station everything started shutting down, ie, traction control, airbag, radio, then lost all power and wouldn't start again. It makes that clicking sound like the battery is dead, so it may not be a fuel problem but an alternator/battery instead.


The only thing that would cause that would be power or electric problem. If there indeed was diesel put in it it would have run like **** and smoked badly right away after it burned the fuel from the fuel lines. Cause diesel is heavier than gas it wo ... 2005 Ford Mustang

My 1996 ford mustang lost all power and when i wiggle the clutch peddle it sparks and gets some power but when i push it down to try an start it all power goes away.


Are you moving a wiring harness under the dash or on the firewall when you move the clutch pedal ? ... 1996 Ford Mustang

My 1998 ford mustang 3.8 had a failure of the ground wire at the battery. I installed a new end and tried to start the engine. The engine cranks but would not start. I parked it in this spot overnight so I assumed it would start when I fixed the cable. I listened for the fuel pump but got no response(pump was replaced 1 year ago). I checked the fuel rail schrader valve and there was no pressure. I reset the emergency shutoff and pulled the fuse and checked, it was ok. There was power at the fuse


You sure the ground wires all reconnected? Check for power at the inertia switch. If it has power,the pump may be bad. Power to the Inertia switch comes through the FP relay, from the fuse. The relay is in a box called the CCRM (constant control rel ... 1998 Ford Mustang

Starting problem hi, i have a 2000 ford gt mustang 2 nights ago. driving down the highway i heard a noise coming from under the hood. the battery light came on then i pulled over admitaly. popped the hood noticed the radiator had blew off. having the hazzard lights on for only 15 minutes noticed lights were going dim then no power at all. all fluid on the ground. got hose put back on no problem with it either. battery completely dead. got jump start. try to turn it over. it will try to crank but


Could be more than one problem. If you tried to start it right after you blew the hose, something could have gotten wet. I hope you have tried after everything has dried out.\015\012Also the sound could be something related to the timing. You ... 2000 Ford Mustang

I have a 2002 galant gitting code 0340 camshaft sensor malfunction replaced but still getting same code what could it be? I'm getting fire on 3-4 but not 1-2 also noticed getting power to 2 coil pack but when I turn key to start power goes to 0


Coil pack has failed change it. ... 2000 Mitsubishi Galant

I have a 1968 mustang with 1966 289 c. code .engine starts good .idels ,good till it reaches running temp. then it sounds like the rockers start to chatter .and mis fires till it dies.it has 40psi on oil gage while its cold . but drops to 0 psi when it warm .im guessing the oil pump is bad . and causing the bearings to get hot and binding the engine. if some one could help me it would be great. thanks for your time.


Yes.sounds like the oil pump is laying down when oil gets hot,,,,,,but,,,,i would try changing oil filter..I have seen Oil filters will **** together after a few min. of run time.....I would never use a WIX oil filter,,have had 3 friends loose engine ... 1966 Ford Mustang

I repaced my powersteering serpentine belt and power steering pump 3 months ago. today it was 32 below 0 C', I started my truck and all of the sudden no power steering I parked it the night before and it was fine no noise or whinning and in the morning the steering was stiff , and never inproved after 40 min drive .what do you think is wrong?


You have a leak fords are noritas for this although its a great disgin madza disgined this pump it works like a rotery engine and last for ever its likely the plastic resiveor had swolen and the seal is likely leaking. You could try putting fuild in ... 2000 Ford F150 Flareside SuperCab

I installed a new starter solenoid on fenderwell on my 91 ford mustang lx and lost fuel pump power i found a loose stud on solenoid and made pump work but now it does not shut off when attempting to start car and car is not starting like its flooding cylinders


... 1991 Ford Mustang

I have a 1995 ford mustang v6 3.8 liter automatic, situation- pulled up to a store and got something to drink. went back to the car turn the key over and heard a click and lost all electrical power, the starter never had a chance to engage. now there is no power in the car anywhere. troubleshooting- pulled the battery terminal off and put back on and all electrical is restored but as soon as the ignition goes from run to start i loose all electrical again, i have repeated this process over and o


Check your fuses. I expect its one of you main uses located under he hood. You also have another fuse box under the dash in the drivers side footwell. Check all the fuses and if any are broken and replace if necessary. Further electrical probl ... 1996 Ford Mustang

2004 5.9L Cummins Diesel cranks over but wont start? Things I have done. Replace- Lift pump new fuel new fuel filter bled injector tubes from fuel rail drain water seperator The engine has 40lbs oil pressure when running . Idles at 750rpms smoothly. Has lots of power 0- 110mpr in 3/4 of a mile. Just takes a VERY VERY small Blast of either to start. What is going on.


\015\012As mostly you have replaced all the possible parts by which this problem can occur.so most probably it’s the faulty solenoid.\015\012Check the solenoid it will have t ... 2004 Dodge Ram 2500

I just replaced the battery on my 94 montero and it still wont hold a charge. everything will be fine for a while but then the radio goes out and the spedometer reads 0 mph as well as the RPM. The battery meter says it has no power. The car will then only go about 30 mph so I pulled over and turned it off and it wont start. Finally after turning all everything including the headlights off for 20 mins it started back up but keeps having the same problem. I am charging the battery right now b


Check all your grounds for a good connection and same with the positive terminal check for a loose connection clean the cable ends good . all it takes is a bad ground not making connection . ... 1994 Mitsubishi Montero

I have 95 mustang has no power at [email protected] mph runs high rpm good power up 0 to 20. 50 and up


When was the last time you tune it up ... 1995 Ford Mustang

My 1992 mustang gt stoped running yesterday it seemed like it wasnt getting any fuel the pump wasnt powering up, i replaced the fuel pump and filter and tryed to start the car and it is doing the same thing the pump powered up one time then it stopped working again. i tryed connecting up a scanner to the computer and iam not getting and codes its like its not comunicating with the computer. do i have a computer prob.????


You may have a computer problem but you need to Replace the fuel pump relay before proceeding. Also remove the fuse and make sure the connections are clean and tight. ... 1992 Ford Mustang

2003 3.8L MUSTANG HAS LOW POWER THROUGH FIRST TWO GEARS, IN THIRD WILL START TO PICK UP POWER


Well i think it could be a fuel injection problem ... might try to run a fuel cleaner in your tank think it is called lucas or k44 ... Ford Mustang

1981 chevy 350/or 305?, it is a rebuilt engine, but when I set the timing at 0, 2,4,6,or 8 degrees it sounds good, however, when it warms up it won't start without moving the distributor. I checked the rockers on #1 cylnder at tdc. They are both closed. When I advance the distributor the car starts when hot, but doesn't have power. I am at a lost. I am thinking that it might be the ignition module, or ignition coil. Is there a way to tell? The engine is in a 1981 Caprice Classic and don't reall


Is your heat riser siezed? If it is siezed closed you have too much back pressure. You will need to free it up. To do this you may have to take the exhaust manifold off as it is situated in it. Use heat & WD40 to free it up. Good luck! ... Chevrolet Caprice Classic

Everytime i start the car it starts shaking and when i drive between 0 to 30 it shakes and has no power


Your car needs immediate maintenance. It is most likely a motor mount that has come loose. Check the brackets that attach your cars engine, and see if one is loose or broken. Do not drive your car. This usually happens when the engine is torqued fr ... 2003 Volkswagen Passat

2000 ford mustang will not start now after blowing radiator hose. with hazzard lost all power. after fixing the problem it will not start. makes a strange noise from somewhere not sure where please help. thanks


Is the noise comming from the passenger side front along the wheel well area? kind of like a motor making some odd nosies if so i would suggest putting the car on a hand held computer and see if the code P1414 comes back if so your secondary air pump ... 2000 Ford Mustang
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.2641 seconds