Having problems with your 2006 Ford Explorer ?

How do I turn off oil change light on 2006 ford explorer after I have changed the oil

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

This is something that should be in your owner manual if you have miss place your see if you can download one its www.edmunds.com if all fails stop by your local Ford dealership in the service department and ask for the service manger he or she will do it for you free of charge because its nothing and it makes them look good wish you the best of luck Michigan Man.
Repair Help & Product Troubleshooting for 2006 Ford Explorer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

2006 Ford Explorer "Oil Change Required" light is still on after changing the oil


IF YOU FIND THIS INFO USEFUL PLEASE RATE ME AS A FIXYA! THANKS\015\012 \015\012Oil Change Reset\015\012A press of the OIL CHANGE RESET switch will allow you to\015\012reset the oil life fe ... 2006 Ford Explorer

Does a 2002 ford explorer 4.6 8 cylinder XLT have an oil pressure sending unit. If so where is it located and where can I buy one. Auto Zone said they never heard of one foe the ford explorer's. I already changed the oil pressure switch and my car is still doing the same thing, check gauge light comes on and the oil gauge pressure goes down to zero and if I run the car that that for a few minutes the car shuts off completely. After a few minutes the car will start again. Please help......


... 2002 Ford Explorer

Trying to reset oil change light on my 2006 ford explorer. the setup/reset steps dont work. it just cycles through. Midas did the oil change a week ago. i called them and they tried to give me steps to reset light using the brake pedals?


Ther are two types of clusters this is the most common, let me know if this doesnt work,you will be using the trip/reset button, when button is said it means the trip/ rest button this is the only button you will use.1)push and release button untilSE ... 2006 Ford Explorer

My 03 ford explorer is making clickety clackety noise under the hood. I looked it up and have changed sparkplugs, oil change, topped off all fluids, changed IAC valve, cleaned part connected to IAC valve, changed O ring on thermostat.. Checked red light with code scanner, it read PO128 Coolant. Now all fixed, light is off, it's still making noise. HELP


... 2003 Ford Explorer

How do I turn off oil change light on 2006 ford explorer after I have changed the oil


This is something that should be in your owner manual if you have miss place your see if you can download one its www.edmunds.com if all fails stop by your local Ford dealership in ... 2006 Ford Explorer

2003 Ford Explorer I changed the oil now how do I turn of the light telling me to change the oil. I didn't get the owners manual with the car.Also the car has a rhythmic low tone roar in the drive train. Both left side wheel bearings have been replaced. Both right side wheel bearings have been removed and inspected. I find no apparent roughness upon inspection. This is a four-wheel drive vehicle. Do you have any suggestions for me?


Turn on the ignition key ( don't start engine )and slowly press the gas pedal down to the floor and raise it up slowly. Do this 3 times. It should reset the oil change light. I don't have an answer for the roar. ... Ford Explorer

2007 Ford Explorer "oil change required" light is still on after changing oil


... 2006 Ford Explorer

I just changed the oil in my 2010 ford explorer and the change engine oil soon light wont go off. how do i get it to go off help please thanks.


To reset the oil life to 100%Hit set up button through all menus to the last menu itemHit reset button when propted to reset oil life to 100%.If you hit the reset with out being in the menus the change is only temporary ... 2010 Ford Explorer

Hallo! I have a 2007 ford explorer truck the oil was changed I received a light that discrib."oil change required". System check and rest didn't solved. Do you have any solution for this problem thank u,


Well I would take it to Ford to reset the warning light and it should go away. Hope this helps?!Please rate and comment - Thank You ... 2007 Ford Explorer Sport Trac

Oil Change Required 2006 Ford Explorer good moring How can I clear out this "Oil Change Required light


1.) Press the TRIP/RESET button to cycle to "SETUP MENU HOLD RESET". \015\0122.) Now press and hold the button for 2 seconds until "RESET FOR SYSTEM CHECK" is displayed, then release. \015\0123.) Immediately press and hold but ... 2006 Ford Explorer

2007 FORD EXPLORER SPORT TRAC 4X4 Change oil light on


Press and hold the SELECT/RESET\015\012control switch to select SYSTEM\015\012CHECK when “SYSTEM CHECK /\015\012HOLD RESET” is displayed in the\015\012message center. Selecting this\015\012function from the S ... 2007 Ford Explorer Sport Trac

Check gages light turns on and doesn't go off. Already had the oil changed, the oil pressure needle keeps marking 0. It had the same problem once but I changed the oil and kept working fine; then about 2 months after that oil change the oil pressure needle started to drop again, so I changed the oil once again, kept working ok, and since that oil change it only has been less than a month, and the oil pressure needle dropped to 0, and the check gages light is on


At this point I would strongly suggest that you have your mechanic hook a mechanical oil pressure guage to the engine and make absolutlely sure that the pressure is up to manufacturers standards. It may simply be a failing oil pressure sending unit, ... 2001 Jeep Grand Cherokee

I have a 2007 ford explorer whose engine light stays on. the oil change light also stays on. its been on for a while,but it doesn,t affect the performance of the car.its in my opinon using more gas. when i go to fuel up it takes along time to get gas in. air seems to be boiling up thru the tank, and that keeps cutting the flow off. my friend put his computer on it and it went off for a day or two. i dont know when or how it started , my daughter was the driver.


If the oil change light is coming ON,then check the oil level and replace the oil.Also if the check engine light is on then get the codes checked.The check engine light comes ON,when there are codes stored in the cars computer.\015\012. If\015\ ... Ford Explorer

Oil warning light came on while driving home, then started flickering on / off for rest of journey 2mls. changed oil filter and oil used recomended Mobil 0 / 30. oil light went out on starting but would come on during gear change, added wynns oil treatment and light has gone out, work colleague advised that there is a sludge prob with these cars and that i should not drive ??


Oil light at idle is a sign of wear. If it only happens at low revs and this is an old car, I wouldn't fix it unless it got worse. If it's a newer car, get a new oil pump. ... Saab 9 3

My girl has a 03 ford explorer I changed the oil and spark plugs yesterday started up fine drove it like 5 miles then the check engine light came on then it just died out like it wasnt getting enough air flow or it got to much the code that comes up is p2197 o2 sensor lean what does that mean its the upward stream one


Reset the PCM Keep alive memory. That is in case you didn't leave somethind disconnected.\015\012Good luck ... 2003 Ford Explorer

Reset oil change light on a 2006 ford explorer


... Chevrolet TrailBlazer

How do you reset change oil light on a 2011new ford explorer


Hi Sailor, That needs to be carried out by the use of a scan tool. Regards John ... 2011 Ford Explorer

How do you reset the "oil change required" light on a 2004 Ford Explorer?


... 2004 Ford Explorer

Unable to reset oil change light - Explorer Ford Cars & Trucks


Take your car to car repair shop------------elm327 ... Ford Explorer

Took explorer to ford agency for oil change,they hooked up to computer to download, the problem with the engine light on continuosly comes up with a code DPFE but they are not sure what this is ,im in New Zealand


This is an usual ford explorer problem. DPFE is widely known and every dealer knows about it. its strange your dealer doen't help. Try consulting a different dealer. ... 2002 Ford Explorer

95 ford explorer xlt, all the blinkers quit working after I had an oil change and new tires installed. We bought a blinker relay [for the hazard lights] but can not find where it is.


Just fixed my flashers today on my 95 explorer, All my lights worked but no turn signals or emer flashers. First make sure all lights are working. Next check the fuses on the left side of the dash, I believe # 10 & # 11, if all is good you can r ... 1995 Ford Explorer

I purchased car Ford Fiesta EA10 ZZM in December from Motorpoint and had a 12.500 mile service done on 30th Dec 2010. This included an oil change. Recently an amber oil change service light has come in the car. Does this need another oil change? (currently at 13500 miles) if not, how do I get rid of the light? thanks - Bob Steggles


No, they you just need lights reset with an OBII scanner. (They forgot to reset your service interval) Any good parts store like Advance, Autozone, etc can do this for you too and FREE ... Ford Fiesta

I have a 1993 ford explorer 2wd. It has about 275,000 miles on it. For some reason my transmission fluid is leaking into the engine oil. When I noticed that my transmission was slipping, I put a qrt. of tranny fluid in and checked my engine oil and noticed it was too high. I changed the oil but a week later tranny slipping again; its a qrt. low, no leaks on the ground so i check engine oil and its a qrt over. changed oil again and the cycle continues. Went to Ford dealer they told me its im


If you have a vacuum modulator on the trans,it could have a bad diaphram and **** trans fluid into the engine.\015\012Now I do not know what model or unit trans you have. No vacuum mod,then the dealer is correct.\015\012You can look just ... 1993 Ford Explorer Limited

96 chevy cheynne 5.7 vortechas about 40to50 pounds oil pressure when first sart in morning and when it gets to temp. it drops to 20to25pnds and at a stop it goes to 0 and gauge light comes on until i give it a little gas then it comes up a bit and light goes out. lately it has gotten worse and i finely put a manual oil gauge on it . it shows around 30pds cold and goes to 0 warmed up. and it takes a lot of rpm's to get it back up to maybe 5-10pds. i even changed oil to straight 40wt. didn'


Well it could be the sending unit for the gauge.But odds are the oil pump or engine bearings are worn out.As the engine warms up, the metal spaces expand and the oil gets thinner. The oil pressure drops some under normal conditions, but not ... 1996 Chevrolet C1500

Check Oil light on a 1994 Ford Explorer


There is a sensor in the side of the oil pan that turns the light on,if the oil level is low. If it has the right amount of oil, the light should turn off. If not, the sensor/level needs replacing ... 1994 Ford Explorer Limited
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.5571 seconds