Having problems with your 2006 Chevrolet Uplander ?

Engin light emission code

\015 2006 chevy uplander 3.5L\015\012\015\012\015\012there is some sort of canister on top of my gas tank on the passager side. It is causing me not to get an inspection sticker. What is that little coffee cup size canister and what does it do. How much are they? Any help will be useful.\015\012\015\012Thanks. Reid\015
Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Evap canister. it recurclates un used fuel. very importent to replace. thay probly run $80 at autozone
Repair Help & Product Troubleshooting for 2006 Chevrolet Uplander

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a 2008 Aspen the check engine light was on when I bought the car from the Infinity dealership, they claim that since they dont have the proper equipment to erase the code, but that the car has no problems. Both the check engine light and the oil change light come on. The code that comes up is the emissions code, they replaced the gas cap but the light came on that sameday.

... 2008 Chrysler Aspen

P0440 Evaporative Emission Control System Malfunction P0446 Evaporative Emission Control System Vent Control Circuit Malfunction P1400 EGRC Solenoid Valve My car won't pass inspection because of these check engine codes. We took out the EGR valve and cleaned it up. It appears to be fine. The check engine light and Codes were turned off but once the car is turned off and then turned back on, the light comes back on. Any ideas on how to cheaply fix this? My maxima is a '96. Thanks

You need a charcoal canister and vent control valve.\015\012\015\012You also need the EGR solenoid valve (I think it the brown one).\015\012\015\012Valve is located in the valley of the V, towards the transmission side of engi ... Nissan Maxima

I own a 2005 Scion Xa with 69000 miles Texas state inspections requires that the vehicle pass emission test as part of the inspection It failed inspection because there were 4 trouble codes stored p0441 p0442 p0446 and p0456 but the check engine light never came on The check engine light does not come on when you first turn the key on or when you start the car or while the care is running What is the cause for the trouble codes and why is the check engine light not working


Code P0420 I have a 01 honda accord ex 2.3 liter v tech engine wich has california emissions. My check engine light is on. it had failed inspection so i did a complete tune-up , oil change, air filter,. I replaced the knock sensor because there was a code for it and it was actually broken. and i also changed the egr sensor because there was a code for that and it was clogged. my check engine light went off and when i got to the inspection station it came back on on and now i am showing P0420. ca

P0420 Catalyst System Efficiency Below Threshold (Bank 1) \015\012\015\012There is one 02 sensor in front of the catalytic converter (called upstream), and one behind it (downstream). When the engine is warmed up and running normal ... Chrysler Concorde

Hi, below was the problem that i had and your answer. My question now is: where is the vaccum elbow located? and also why do i have to change that? thanks My 1999 Volvo S70 hasMy 1999 Volvo S70 has a engine light on. I pulled the code with OBDII computer and the code is: P1081 manf contrl, fuel & metering, auxiliring emission, controls. What is that proplem and how do i fix? thanks MoreMy 1999 Volvo S70 has a engine light on. I pulled the code with OBDII computer and the code is: P1081 manf

... P1081, ECM-720A, Immobilizer Communication (Faulty VIN Code). P1081, ECM-720A, Immobilizer Communication (Faulty Communication). P1081, ... \015\012\015\012This code is a communcation issue between your key remo ... Volvo S70

High Emissions hi have a 2001 vw beetle with the engine warning light on, i have plugged in a obd ii sensor and it shows code 16518 O2 sensor circuit - no activity detected (bank 1 sensor 1) i have replaced both the O2 sensors and deleted the codes but after 15 min of driving the light came back on and the read the same code, i took the car for the MOT and it failed on high emissions, any ideas what this could be?

Sorry if that is the code it is not correct with the obd format it surpose to have something like P0033 re-check and let us know the correct code ... 2001 Volkswagen Beetle

My 2002 Grand Prix GT 3.8L Won't pass emissions. Testing center's scanner says car was recently worked on and that the mileage driven since is not enough to recycle check engine light. The ck eng. light has not come up in over a year. The light bulb is good. Since then we have had the engine scanned and no codes are showing up. Emissions test performed a 2nd time and again failed for same reason. Could the ECU possibly be bad? Any help would be appreciated.... About to pull my hair out!

I would hope that's all there is to it but I've been driving it for several hundred miles between emissions tests. I believe the ECU isn't resetting like it should. I've replaced the usual suspects like O2 sensors, Spark plugs (all 6), cleaned EGR va ... 2002 Pontiac Grand Prix

QDM I have a 1988 oldsmobile Achieva I need to have it smoged but the engin light is on. When I run the trouble code the only code that comes up is the QDM (quad-driver module) my repair book is a haynes and all it says about it is to take it to a shop or dealer. is there any way I can get the engin light off and does the QDM have any effect on the emissions, they told me that it won't pass smog if the light is on Thank you

I don't know what state you are in but if the light is on where I am the emmision machine will abort the test and fail the car. It doesn't care if it is emmision related or not. In your case it sounds like a new computer will do the trick. You can bu ... Oldsmobile Achieva

I have a 2000 Pontiac Grand AM SE with a V6 3.4 liter engine. I had my check engine light come on and went to Auto Zone to get a code which related to a emission vapor leak. So I took car to my mechanic and he performed a smoke test which indicated the vent solinoid was bad. Had him replace it, hooked up scan tool to turn check engine light out then a week later came back on indicating same code. So my mechanic suggested to replace gas cap and purge valve because thats all it can be. Did that an

With the new ecm you have to relearn the security system. It is a 10 min relearn process. Try to start the engine and let the key in the run position for 10 min and observe the security light. It should flash for 10 min and go out. Turn the key off a ... 1994 Chevrolet Camaro

I got a code for the MAF SENSOR so I bought the piece and it cause my car to stall out. So I put the old piece in AND the car is running normal. the check engine light went off and comes on then goes off again. The engine light is on now and the guy at the emissions say that the code is P0102 and its the MAF VACUUM. What is that and what's the difference between them. And how do I fix this

Code 102 means the MAF sensor is telling the computer there is very little air flow into the intake. Normally the airflow is lower at idle than when you are accelerating, but the sensor reading is lower than spec.You could have a leaking hose b ... Cars & Trucks

Emissions problem I just had the fuel pump replaced because of a bad sending unit. Within a month the check engine light came on and the code said that the EGR valve was clogged. I noticed a definite lack of power in the acceleration of the car. I had the EGR valve replaced along with a fuel service to increase gas mileage. Now the check engine light is coming on saying that evaporated emissions are low, the oxygen sensor was low? The car is barely accelerating(very slowly) but is fine once it i

Try cleaning the mass air flow connection plug with electrical contact cleaner then plug it back in after its dry. worked for me after i had the same symptoms in my 99 rodeo. ... 2000 Isuzu Rodeo

P0441 1st my check engine light came on so i took my car 2 auto zone and let them put their machine on the car and it read the codes p0441 and p0442!I took it 2 take the emission testand i failed of course,but there print out read my 02sensor and catalyst convertor needed 2 get fixed took it 2 the shop and they fixed it!The light went out 4 about 2 weeks then itpopped on again!I took it back 2 the emission testn place and of course the car failed again!Now the code is reading out 2 b p0441! I we

I would have the front vacuume switching vavle checked ... 2001 Toyota Corolla

My check engine light came on my car about a year ago and I got a code - P0497 Evap Emission purge flow fault. I had my check engine light reset. It has now come back on again. Do you think it's the same issue, because I never checked it out the first time? What does that code mean?

You have to pull the codes, do not guess, waaaaay too expensive...THe purge system bleeds tank fumes into the intake system, for clean burning.... Something (was at least) is worng, pull the codes and proceed. ... 2004 Honda Accord

The car failed Emissions test. It was discovered the Oxygen Sensor Circuit - DTC 44 (code) was defective. When the ECM was replaced, the car passed Emissions testing. I drove the car home and then to work the next day which was a total of 14 miles. When I was ready to turn the car off, the check engine light came back on. I brought the car back and the ECM had to be replace again. Once again, home and to work (14 miles) and the check engine light came back on. The ECM has to be replace ag

The ECM is not going out continually, the shop is diagnosing the problem wrong and putting an ECM in it when it has not failed. The code 44 is a two trip logic code, meaning it needs two 'official' drive cycles before it triggers the light. This is ... Jaguar XJS

Hi , I have a 2001 Pontiac Grand Am Se 2.4 and my svc engine soon light came on so i did a diag test and it had code P0440 Evap Emission sys . i was told that was a vacuum leak somewhere?? so first i bought a new gas cap for that yr and model vehicle then i cleared the code and drove it and some miles later light was back on , then i was looking for cracked or ripped vac lines , found one and replaced it cleared code and drove it again and some miles later light was back on ????? my CAN OBD2 sc

Your scanner probably said I/M rediness tests not complete. It takes most OBD II systems about 50 miles to complete all the self tests. Best way to find a vacum leak is to start the car and then using a spray can of carb cleaner, spray around any hos ... 2001 Pontiac Grand Am SE

Have ford focus 2004 zts with 118000 miles. check engine light comes on. fault code po-420 (bank 1 efficiancy below limit) shows up. Took it to the ford dealer for repair- they replaced top o2 sensor- said that should fix problem. It didn't, chk engine light back on. Now they want me to replace a $1600.00 exaust part (not including labor) an there is no guarantee that it will make my check engine light stay off. Need this car to pass emissions test but am running out of money. What should I do!

... 2004 Ford Focus

The vehicle check engine light is on 2002 Sportage. Emission inspection failure codes: P0440 - evaporative emission system, code P0446 - evapoative emission system vent control circuit. There is always a slight smell of raw gas, but noone can seem to determin where it is coming from or how to solve the code problems. Help!

My friend, raw gas - fuel vapors. Do you know that one gallon of gas will push a 4,000# block of steel about 20 miles?\015\012\015\012Please have your Kia dealer investigate and repair this discrepancy for you.\015\012\015\01 ... 2002 Kia Sportage

I have a 2005 Pontiac G6 sedan. The check engine light was on. The code read P0113 (high output) which was the only code the computer was throwing off. We replaced the mass air flow sensor. Now the car is throwing a totally different code P0102 (low output). We are at a total loss. We have had the code history cleared, disconnected the battery and cycled the engine through. Any suggestions? I need to get it resoved to pass NYS emissions inspection. Thanks!

... 2005 Pontiac G6


The canister purge valve may have a slight vacuum leak you may want to check it with a vacuum pump ... 2004 Toyota 4Runner

Hi, I have a 2001 Chrysler T&C. Check engine light is on for #2 & #5 misfires and cam sensor codes. Small emissions leak. This began after I had the transmission rebuilt. Replaced plugs, wires, fuel filter & coil:but light came back on. Engine light flashes when accellerating but drives fin. Only felt the misfires once when van didn't accellerate immediatley like it usually does. Could it be carbon build up? Should the mechanic replace the cam sensor? Could the fly wheel have cracked when trans.

Emissions leak causes haywire problems and odd codes cause it dumps into cyl2 ... 2000 Chrysler Town & Country

I have a 1996 cutlass supreme. The check engine light is on. I have, but not to fimilar with, a OBD2 scan tool. I'm getting the code PO441. (Evaporative Emission System Incorrect Purge Flow). I know this could be a number of things. Where is the best place to start and with what tools do I need? Please answer this question. If I clear my code, the car will run code free for more than a day. If I take my car for the emission test, will it pass during this time? Thanks, Kim S.

You should have the fuel filler cap checked first and if defective replace it with a new one. Thats where I wouls start. Most common problem ... 1996 Oldsmobile Cutlass Supreme Coupe

Car would not start when i went inside to get breakfast bvefore that the secuirty light was on. when i turned the key all of the engine lights came on but car would not turn over. also check engine lights came on about 2 weeks ago was advise that the code read something about emission

The security light and not starting is telling you it doesn't sense the little resistor in the key. (The little black chip at the base of the key before the searations start.\015\012\015\012Try a spare key. Then get a another key made. T ... 2000 Buick Regal

Check engine light comes on. Showing code for Large emission leak. Checked gas cap and reset code. Light comes back on

Try changing the lan censor ... 2000 Dodge Durango

Emission test showed error code p1443.check engine light stays on.1996 ford ranger.I looked the problem on ford emission control error and says it could be canister,purge flow sensor or purge valve.I would like to see a diagram from canister to engine

You might want to try "google images" just type in your vehicle and what your looking for. Here's an example (link) of what to look for.http://www.fordmuscle.com/forums/attachments/all-ford-techboard/4132d1212515121-code-p1443-help-96tbir ... 1996 Ford Ranger SuperCab

My name Tommy V, I have a 2001 Toyota Echo, the CK engine light was on, went to a car parts store used their code reader, code was PO441 Evaporative emission control -System incorrect, purge flow. I used the reader to reset light, what does "purge flow" mean?

The EVAP cannister is part of the emissions system. Excess exhaust runs thru it-purge flow is when it is released. Check all the vacuum lines going to it. I don't you will find a parts listing for a purge flow valve or vent or solenoid. Your ligh ... 2001 Toyota Echo
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.6888 seconds