Having problems with your 2005 Hyundai Sonata ?

2005 Sonota turn signals and hazards stop working

\015 Turn signals worked fine then they would come on then go off now they dont work at all and the hazards quit also. tried to replace the relay but cant find it dealer says it up in the dash. Thanks..\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Multfunction switch go to oriely auto parts buy 20 dollar book you will be money ahead hey vote for me ok if you need help let me know
Repair Help & Product Troubleshooting for 2005 Hyundai Sonata

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a 2000 dodge grand caravan and the turn signal just do not work the hazard lights do and when I click for the turn signal I do not get any clicking sound whatsoever. I cannot find any fuses that are labeled turn signal or flashers only the hazard fuse is a while back before the turn signal stopped working altogether they would not work when the vehicle was cold once it started warming up then the turn signals work but now they don't work at all is this a fuse issue or is it the whole tur


Blown bulb ... Cars & Trucks

2005 Sonota turn signals and hazards stop working


Multfunction switch go to oriely auto parts buy 20 dollar book you will be money ahead hey vote for me ok if you need help let me know ... 2005 Hyundai Sonata

2003 ford explorer - sometimes the turn signals work correctly. Other times they may flash 3-4 times then stop; however, turn signal switch is still engaged. When they stop working hazard flasher are tested and they work even when turn signals fail.


This is most likely going to be an issue with a relay. The relay on the fords that is tied into the blinker module can go bad is it gets wet or over loaded. Are there any after market things added to your vehichle? This can also be caused by overload ... 2000 Ford Explorer

Jimmy gmc 1997 stop lights are not working, but turn signals are working, stop light fuse is ok, hazard and turn signals flasher working good. I would like to know why stop lights are not working.


Is the third/hi mount brakelight working? Try wiggling the turnsignal switch while applying the brakes and have someone check to see if the brakelights come on. If so The turnsignal/multifunction switch is bad. ... 1997 GMC Jimmy

All of the turn signals on 2004 Honda Civic have stopped working. They all still work when my hazard lights are on, but not to signal a turn. Now, sometimes it will work for a few flashes, sometimes only one flash before it stops working,sometimes not at all. What is the problem? Can I just go to Kragen and get something changed out or do I need to get it to a mechanic?


You need a new flasher. Go to the parts store and ask for a flasher that fits your car. Also ask them where to find the flasher on your car. It is usually under the dash somewhere, sometimes plugged into the fuse box. My manual does not say where ... Honda Civic

Right turn signal stopped working months ago. When I put the hazards on, only left side worked. Now left side working intermittently. I wiggled the wires to the turn signal switch and the left side is working again. Not sure what to change...turn signal swith or flasher relay???


... 1989 Mazda 626

Where are the fuses for the trailer turn signals on a 2003 F250 I have the same problem with my 01 Superduty. My turn signals and Hazard lights both stopped working at the same time. It may be coincidence but I rented a trailer with lights and they worked fine the entire 4 hour trip. The next day no signals or hazard lights at all.


The fuses r located exactly behind the power distribution box.just check out properly before replacing.\015\012thanks. ... 2002 Ford F250 Super Duty SuperCab

On my 2004 impala, the front right turn signal doesn't work, (only works with hazard lights). And the back right signal is fast. The signal "clicking" sound is non stop but on the other hand both the back and front left signals are working fine. The right signal doesn't even show up on the dash unless its the hazard lights. What do I do?


If the turn signal filament of the right front park/turn lamp is known to be OK and the hazard switch is in the normal position, the hazard switch or the turn signal/multi-function switch could be defective ... Cars & Trucks

Turn Signals/blinkers 1992 Honda Accord w/ 200,000+ miles. my blinkers/turn signals just stopped working. when I flip them, either direction, nothing happens, no clicking, no lights w/o signal, nothing. Hazards don't work either. brake lights are working, everything on the dashboard works, except the turn signals. Obviously could just be a sign of the car dying cuz of the mileage its seen (though its been regularly taken care of), but its worth asking about. thanks


I have a 1992 honda accord and i have no blinkers or hazards but all other things work i replaced the relay and when i put it in my left blinkers come on and stay on all the time no matter what but the hazards work at that point. PLEASE HELP THANKS ... 1992 Honda Accord

2000 mpv . my dash and turn signals stopped working. i have no fuel guage, odometer, rpm, temp guage or turn signal. the turn signals do work if the hazard lights are turned on. the battery also goes dead after sitting all night. what could this be?


Drivers side kick pannel remove it and you will see lots of conectors make sure that they are pluged in i have see this problem befor. or boky controll mod is shot ... 2000 Mazda MPV

My cigarette lighter does not work,its new and its not a fuse. Also my dash lights do not work. A bigger problem is that when I turn my headlights on all the gauges will stop working.When lights are off all gauges work correctly turn them on and they all stop working and both turn signal lights will light up like the hazards are stuck on but their not. Can anyone point me in the right direction?


Sounds like you have a bad ground. could be the printed circut on the back of the cluster. as for the cig lighter def stsrt with a new ground ... 1988 Chevrolet S-10

I have a few different problems with my 2003 Impala. First off sometimes when I turn my turn signal on it will blink once and stop working. a quick fix is to hit the hazard lights on and off and then the signal lights work again. I have read that this can be fixed by replacing the hazard switch... is this true?? Second, the airbag light for the drivers seat, that comes on when you start the car, stays on permanently. I have read this is an electrical problem, but how do I fix it?? Third, the


... 2003 Chevrolet Impala

How do I find and replace the turn signal fuse on my 97 chevy s-10? The hazard flashers work fine, but the turn signals have stopped working. Doesn't seem to be an issue with burned out bulbs, so I'm assuming the turn signal fuse is bad. Can't find it on my truck.


Look in driver side, on side of dash) there is a small doorand look for the fuse must be 20 or 25v. God luck ... 1997 Chevrolet S-10 Pickup

Had my turn signals on turning left, all of a sudden the turn signals stopped and will not work anymore. The hazards also do not work. I put the signals on, either left or right, and nothing happens. No fuses are blown, I checked them all.


The next thing is to replace the flasher, you checked the fuses and they are good then my next step would be a flasher, ... 1999 Saturn SL

My turn signals and hazards are not working on my 1998 Subaru impreza 2.5 rs. they where working the other day and then they stopped working for about 20 min, then started working again. but now they are not working at all. i checked for power to all the lights and i had power. i also checked the fuse, and what i thought was the relay for the turn signals and that had power. What do you think my next step should be?? or has somebody seen this problem before??


You need to check grounds to the plugs and to the body and frame of your car if all the power circuts are checking out. ... 1998 Subaru Legacy

2004 jeep grand cherokee laredo left turn signal flashes when hazard lights are on but whe you turn off it stops working right turn signal works.


... 2004 Jeep Grand Cherokee

I have a 2002 jeep grand cherokee and my turn signals stopped working. My hazard lights are working fine. Lights are working also. But im not getting a light on the dash for my turn signals.


I have the same issue. I took the flasher relay out, inspected the pieces for any hairline fractures on the circuit board, nothing it was clean. On my jeep, the turn signals always work in the Spring, Summer, Fall months, but as soon as Winter hits I ... 2002 Jeep Grand Cherokee

I HAVE A 1997 MERCURY SABLE, ONE OF THE PROBLEMS IS THAT THE REAR TURN SIGNAL AND HAZARD DON'T WORK, ONLY THE FRONT ONE ARE OK.FUSE IS OK,BULBS ARE OK, TURN SIGNAL FLASHER OK TOO. THE SECOND PROBLEM, WHEN THE CAR IS IN PARK OR NEUTRAL THE RADIO AND POWERED WINDOWS WORK,BUT WHEN I PUT IT IN REVERSE OR DRIVE THEY STOP WORKING THANKS FOR YOUR HELP


You have a bad ground ... Mercury Sable

My 2003 Audi A6 has a "seizure" when put into reverse sometimes. Also, my turn signals recently started to stop working or work when they choose to (they will flash once or twice then quickly flash and then stop all together, yet the hazard light button still works and the blinkers both flash...) also my steering wheel makes a snapping sound when turned left or right... Im assuming the CV shafts are out... what is that going to cost?


Your turn signal issue is very common even though you hazards do work they are on a different line connector in the relay that is also your turn signal relay. replace that hazard relay that should solve that problem. the c/v joints can be about 500 a ... 2003 Audi A6

This car is a column shifter I HAVE A 1997 MERCURY SABLE, ONE OF THE PROBLEMS IS THAT THE REAR TURN SIGNAL AND HAZARD DON'T WORK, ONLY THE FRONT ONE ARE OK.FUSE IS OK,BULBS ARE OK, TURN SIGNAL FLASHER OK TOO. THE SECOND PROBLEM, WHEN THE CAR IS IN PARK OR NEUTRAL THE RADIO AND POWERED WINDOWS WORK,BUT WHEN I PUT IT IN REVERSE OR DRIVE THEY STOP WORKING I WAS TOLD THAT I MIGHT HAVE A BAD GROUND, IF SO, HOW DO I FIX THIS? THANKS FOR YOUR


The turn signal problem sounds like the multifunction switch (the turn signal switch) is bad as far as the radio and windows it sounds like the trans range sensor is bad it is located on top of the trans at the shift linkage ... 1997 Mercury Sable

My turn signals stopped working and the fuse is good and everything else in the car works even the hazard lights. and backup lights witch the maual says the turn signals are paired with. the switch will go up and down and pop back after a turn and i took off the cover under the steering wheel and i cant find the reley to check it. an i looking for a silver cylinder or a black squarish box.


It sounds like either the blinker switch witch is in the colume or the flasher witch should be in the fuse box under the dash . Does the blinker lite up but not blink ? ... 1995 Buick Century

My 2000 Ford Windstar is having some electrical issues. I was driving it home and the AC stopped working the radio went dead the odometer went dead my turn signals did not work and I could not roll down the windows. I dont think my lights were working either. It was during the day so it was hard to tell, but when I turned on my brights the indicator light on the instrument panel did not come on. My hazards did not work either when I turned them on. I turned off the car in the parking lot a


Check your alternator. My van did something similar. I was driving down the road and all of the sudden my windows, a/c, radio, door locks, speedometer, everything electrical went down. We stopped and tried to crank it and it wouldn't. Then finally it ... 2000 Ford Windstar

I have a 99 Suburban. About a week ago, the two main brake lights and the all hazard lights stopped working. The upper center brake light still works. If the hazard light button is in the on position, the turn signals do not work so there is no blinker activity. When the hazard light button is in the off position, all blinkers work. I have removed the trailer light harness T and replaced the bulbs, and fuses just in case. I started looking for bad/broken wires but haven't found anything.


Hi! Please do check the turn signal/hazard relay. They may be corroded or may need replacement. Hope this helps and thank you for using FixYa! ... Chevrolet Suburban 1500

The turn signals on my 2003 Impala intermittently stop working. They will work fine one minute and then the next time you use the signal they don't work. Sometimes if you leave the signal (left or right makes no difference)on it will come back. Activating the hazard lights also will work but not every time. It's very random when they go out (wet weather, dry, same trip, cutting the car off)


Sounds like your blinker relays are going out. Im not sure where they are located on your vehicle. but typically they are located in the interior fuse compartment of the vehicle ... 2003 Chevrolet Impala

While I was driving my 2002 Voyager the fuel,temp and speedometer gauges stopped working, then I went to turn and noticed the turn signals also were not working. Then I went to turn on the hazards and they did not work, but everything else was working fine. I checked for faulty fuses but did not see one. Help! Thanks


It sounds like your ignition key isn't returning all the way back from the start position to the run position because the return spring has gotten weak. The next time it happens try turning the key back to the run position. ... 2002 Chrysler Voyager
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.6358 seconds