Having problems with your 2005 Dodge Neon ?

2005 dodge neon you won't believe it our family lost both keys for this car one set two weeks ago one set yesterday. can you help us we don't know what too do? thank you

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

You have two choices. You can call a mobile lock smith and have them pull out your lock cylinder and try to make a key if they can. That will be a very costly option. The best thing to do is go to the nearest Dodge dealer but make sure the parts department is open first by calling. Bring the registration and two forms of identification. The registered owner of the car will have to be the one to ask them if they can use your VIN number to look up the key code and cut a key for you. It will probably be about $45 but some keys can be a little more costly. The VIN number is on the registration but it can also be found on the very front of the dash board on the drivers side. you can read it from the outside of the car through the windshield. I would try retracing your steps before the keys were lost and try to find them before having to pay for a new one. *** Please rate me on this answer.***
Repair Help & Product Troubleshooting for 2005 Dodge Neon

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

2005 dodge neon you won't believe it our family lost both keys for this car one set two weeks ago one set yesterday. can you help us we don't know what too do? thank you

You have two choices. You can call a mobile lock smith and have them pull out your lock cylinder and try to make a key if they can. That will be a very costly option. The best thing to do is go to the nearest Dodge dealer but make sure the parts depa ... 2005 Dodge Neon


... 1999 Volkswagen Beetle

Ok i just replaced my spark plugs on a 1998 chevy silverado C1500 its been about three weeks and pulled some out and most are caked with a little bit of stuff and are black. I have to put a qourt of oil in every two weeks its not leaking anywhere and dont smoke unless i am getting up on it. Its not running right at 2000 rpm it shakes alittle any body can help would be great just bought the truck not even a year ago thanks

Black sloot on plugs is a sign of weak ignition. ignition control module. if it is wet and black then that is iol. which is valve seals ... 1999 Chevrolet Silverado 1500

Starting problems If prix sets for more than one half hour it turns over several times before starting almost like not getting fuel. if you start it back after 10 min of shutting off it will start right up. just started doing this about two weeks ago.

Please check the fuel system. The fuel pump and the fuel filter. ... 2004 Pontiac Grand Prix

Hello i have a nissan pulsar n13 i bought it about two months ago and has a faulty water temp gauge i had it going bya mechanic until last week when i replaced the lights in the cluster and now the temp gauge does'nt work again i have been told that the circult board on the back is common for that can any one let me know what to do thanks heaps

Possibly the circuit board but i see it unlikely. you may have damaged a wire that works the temp guage. i have a nissan pulsar and mine works just fine. ... Nissan Pulsar

I have had two instances of my 2002 Bravada stalling while driving and won't restart. But then approximately 15 minutes of waiting it will start and run fine. One instance was today and the other was 3 weeks ago. Any ideas what might be happening? Thanks

Hi and welcome to FixYa. I am Kelly. \015\012\015\012Usually when a car stalls it is either a result of a vacuum related problem or a fuel problem. \015\012\015\012If the car stalls after a good drive since filling with gas ... 2002 Oldsmobile Bravada

It got wet two weeks ago bought it didn't know it had a leak it is all dried I have driven since however each day I have encountered one problem after another first could not get convertible top to go down at first windows would drop when release pushed but button does nothing I had the convertible top down several times prior to this now the windows dont drop or go up and down and now the darn thing wont even start checked battery checked fuses don't have a clue what is wrong here

Sounds like u have a major electrical problem, and u might have to have your car re-wired ... 1999 Porsche Boxster

Overheating engine i had headgasket test done they say not gasket car is getting hot above 70 km p/h, if i dont free weel now and then i will boil. i just bought the car last week , it was a one owner car.he parked the car about 7 months ago but still just started car almost every day for a few minites. if i take new radiator cap of water is circulating, if i rev car it does try to push little bit water out. could you help please. thanks

It sounds more like a timing problem, if it only does it above a certain velocity. get your cars timing checked ... Cars & Trucks

I have a 3000GT VR4 from 1997. A month ago I had almost no oil in the car, way before due oil change. Yesterday, white smoke was coming out of the exhaust. One mechanic told me last week that I need a Drive Shaft Carrier and a Bearing, Top engine mount. Today, I hear from another mechanic (after the white smoke), that one of the Turbo's is leaking. Oh, two weeks ago Mitsubishi replaced the Rear Springs and Struts, and said the car was fine otherwise. I feel so overwhelmed. I wished I could speak

Hi Maria, Does the white smoke occur at start up then go away?Was it cooler out the night before the white smoke started? Likely it's condensation burning off.To be on the safe side have a compression test r ... 1997 Mitsubishi 3000GT

I have a 1999 Dodge Durango and when I start it up and give it gas, it dies. This has happened several times. I replaced the battery about a year ago and I just got gas two weeks ago and two days after filling up this problem happened again. I put dry gas in my tank and it was running fine. I got gas a few days ago and two days later I have this same problem again but this time my check engine light is on. Not sure what is going on. Thank you.

Hello--Well--if it only happens when you get gas and you fill up when on E then there is something in your tank like water or rust. If you can make it to an autoparts store like Oreilly's they will check the codes (engine light) for free ... Cars & Trucks

I have a 94 ford ranger 4.0.. i've replaced the slave cylinder 2 times.. i put a new one in it and everytime about two weeks later it goes bad again and i have to keep putting fluid in it to get pressure..then slowly it gets worse and worse.. it'll be a about a week before i have to refill it, then a few days, then a couple times every day. i changed the slave cylinder again and the same thing happened about two weeks later. i cant figure out why this keeps happening. i dont want to just put ano

I am assuming you are talking about the clutch slave cylinder in either witch case you may have to more air in the lines try bleeding them until you get no air. the second thing i have noticed in stiff clutch's is that if there packed with dirt or wh ... Ford Ranger

Hello I have 98 GMC I ran out of gas two weeks ago out in gas it had rough idle for one Minn. Then ran fine now two weeks later the rough idle is back runs good when giving gas but idle.is rough.

... 1993 GMC Sierra C2500

Charging is not charging right. I have had the alt. rebuilt twice and a new alt put on. Two weeks ago I put a new heavy duty battery on it. Every time I have it worked on it will put out 14 or more volts for about two weeks then it starts dropping to as low as 11.8 volts. When it drops below 12.3 the shifting indicator lights will flash and the temp gauge stops working and the anti theft system problem will show. After I turn it off and let it set for a few minutes and restart the volts will ret

You have a faulty Voltage Regulator or relay in the power Distribution box under the hood. ... 1997 Cadillac Seville

Hi i have a 98 c280 and the windows work intermitantly sometimes the two front one dont work than the two backs than both on the right than both on the left there is no rhyme or reason which ones will act up and when they do the power mirrors stop opperating on the side the windows do not work, if i disconnect the battery they work for a week maybe and then act up again also the auto up and down does not work since this problem started. Is there a controll modual for this? I have pulled up the r

... 1998 Mercedes-Benz C-Class

I have a 2002 Pontiac Grand Prix GTP. One and a hlaf years ago had the MAF & EGR valve replaced, 1 month later another MAF put in. Two weeks ago I had MAF put in as engine light came on, drove 20 miles and it shut off. Had it towed as it would start and shut right off again and they said it was a defective MAF...again. Engine light came back on next day and it ws the intake manifold & gasket...had them replaced. Engine light came on yesterday on my way home, I made one stop and could not g

Hi Dawn.I don't believe that your MAF has ever been the root cause of the problem to begin with. They don't often fail on their own and especially after only a month. If it is due to an electronic problem then it will be instant. The o ... 2002 Pontiac Grand Prix

Temp gauze indicates engine running hot (not always happening) can move up to very hot....have radiator flushed and new thermostat-(8 month ago).two weeks ago two new cooling fans...mechanic cant find the problem.. I dont think its temp.sensor(?) as temp goes up slowly when driving, and shoots up when stationary..then reduces again when driving....mechanic has added sealant to the radiator

Check and see if your fans are coming ON. and also, see if there is a lot of junk such as dead bugs and **** stuck in the condenser and radiator. Let me know if this works out. \015\012\015\012Good luck! ... 1999 Honda CR-V

Hi . I have a 1997 Isuzu hombre 2.2 with manual shift . I bought it new . Always serviced and taken care of . 145 k miles . Two years ago the fuel pump was replaced ... Then two weeks ago in one day the truck engine would die when stopping . The engine restarted on the second try . then that same day the when I tried to restart the engine it would fire and then stop running . Engine eventually started after several tries . . I drove home some 50 miles and parked .. The engine wont start now .

... 1997 Isuzu Hombre

My 1999 GMC Jimmy's AC is not cooling as well as it should. It did this a few months ago and I put some freon in it, seemed to help the problem, I tried it again a few weeks ago and this time it didn't help. Is there a certain kind to put in it?? Maybe I put the wrong kind in?? Also the air is not coming out as forceful now when it is set on low or med, only when set on high. Is my compressor failing??? Help please Thanks

This Could be And is Normaly Caused by the ORFICE TUBE Getting Clogged up it Must Be Replaced and FREON Replaced R-134A is the FREON Used in this System, The Age of your Vehicle is My Clue that this MAY BE Your Problem ... 1999 GMC Jimmy

We had asked a previous question about a 2000 Ford Contour SVT's electrical system but could not clarify the problem. So I will do my best to clarify now and see if it can help anyone tell me what kind of solution I need. First of all, I have a slow drain on my battery and I have already lost two alternators a week apart from each other. The second one was a top of the line, higher output alternator and I am on the third one as we speak, it was installed a week ago and I haven't drove it because

It is very possible that the headlights were the "last straw" per say. If you are handy with a volt meter and can read a wiring diagram then email me at [email protected] ... 2000 Ford Contour

OK GUYS really need some help here!! 2004 mitsubushi endeavor has oil pressure idiot light no pressure gauge. problem: very noisey valve lifters and oil light on check engine light came on about two days ago, did oil change about two weeks ago about 87k on v6 otherwise engine runs great smooth, has all power but sounds like a diesel engine (it's a gas motor) engine ran fine after oil change and had no issues,one strange thing Iput quart of STP in and loose load lifter sound went away, then I dro

I'd find a garage mechanic that has a mechanical oil pressure gauge, or buy one and install it first to confirm what is really there for oil pressure, then go from there, once that is confirmed. ... 2004 Mitsubishi Endeavor

Two weeks ago, when I went to Acura deller for oil change, they sugested me change the battery, since I never got a problem for start, so i did not change the battary. But next day I can not start my car, I went to O'reilly auto part got a new battary. one week late, I can not start my car again, I jump start the car and went to O'reilly test the battary, the battary is ok. the old Acura battary is 550 CCA, the new one not a Acura battary,is 720 CCA. to day I start my car without problem, could

First make sure the terminal and posts are clean and greased.\015\012\015\012Then make sure the alternator belt is tight.\015\012\015\012The type of battery makes no difference as long as it fits. \015\012\015\012 ... 2003 Acura 3.2TL

Where is the Cam sensor located? and Where is the Crank sensor located? How do i get to them? which one would be the one that doesn't cause the spark so the engine wont start. i have both parts but boiled the problem down to these two sensors but dont know which one to change first to try to get it started. thanks

Disconnect the Negative side of the Battery before starting.\015\012The Crankshaft Position Sensor is the one that if no signal is sent, the electronics will not initiate.\015\012The Camshaft Position Sensor is located on the front of the ... 2000 Dodge Caravan

I just replaced my factory stereo in my 2002 honda accord. i have two red wires left over that appear to be my dash lights. i dont know where to connect these two wires to make the dash lights come on when the head lights are turned on. if i connect one of the wires to either of the power wires the dash lights stay on all the time. if i connect the other red wire to either of the power wires my lights that tell me what gear im in go out. WHAT DO I DO WITH THESE TWO WIRES? Thanks so much Kev

I have no idea about the wire that puts out gear position lights. But the one that makes dash be on constantly, is the memory wire for radio. You do need continuous power for radio to remember stored radio stations, audio adjustments and last source ... 2002 Honda Accord

I think my car is possesed so I call it Christine. Every week something is wrong with it. I dont get one thing done and another happens. Alot of electrical items. I have replaced my alternator two times in six months. My battery also. I burn light bulbs weekly. My window motors burnt up and my heater blower motor burnt up.I have replaced multiple scensors and it just keeps going. Now it is the ps last week it was the brakes. My service engine soon light will come on and if I fill that fuel and p

Not to knock the ability of the mechanics where you have your work done, but with all the electrical problems you're experiencing, it would be money well spent to take the car to an electrical specialist. He can track down shorts and maybe get a lot ... 1999 Oldsmobile Intrigue

The cruise control on my 1993 Honda Accord LX, automatic 4 cylinder works sometimes and sometimes not. It worked three days ago. It wouldn't work the next day. The following day it would. Now it won't again? I'm lost! The cruise control in my '93 Accord is very erratic. When I set it the instrument panel light shows that its on but it does one of two things: 1) it doesn't hold the speed at all, or 2) it drops 20 or 30 mph below where I set it, then picks up to the speed I set it at and is very

Sounds like possibly a safety switch associated with the brake or shifter is engaging intermittently. There is definitely one behind the brake because when you apply the brake the cruise kicks out. Try looking for this switch and check it out. ... 1993 Honda Accord
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.4849 seconds