Having problems with your 2005 Chevrolet Impala ?

Brake pedel goes to the floor

\015 I put new pads on the front of my 05 impala ,i used a c-clamp to push in the caliper then put everything back to gether, now my pedel goes to the floor what could it be\015 Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Pump the pedal until it goes hard this is common when you push it back all the way just needs a few pumps to get it to extend back to the pads making contact with the rotor, is there any fluid leaking anywhere? is there brake fluid in reservoir?
Repair Help & Product Troubleshooting for 2005 Chevrolet Impala

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Brake pedel goes almost to the floor after replacing brakes, bleeding all brakes and had air in back brakes. Replaced master cylinder and brake pedal is spongy and goes almost to the floor.


Believe it or not, there is STILL more air in the wheel cyclinders or the calipers. This takes a great deal of patience and time to get right. Try bleeding the rears without the engine running. This will be a little harder but you'll be able to hear ... 2006 Dodge Caravan

92' Geo Tracker i have an problem with my brake system i have hardly no brakes pedel goes to the floor and then the brake light comes on let up on the pedel and the light goes off. tried bleeding brakes muiltiple times nothing changed. has a new master cylinder and i bleeld it and no change.


... 1992 Geo Tracker

I just had new brakes put on the front of my suzuki , rotors and pads on the front,but my my mechanic said the back brakes are drum brakes,he cleaned and lubricated them, but now the back brakes are sticking,feels like the emergency brake is applied. then the release and the pedel goes to the floor


I just had front brakes put on, but now its making noise and feels like is sticking when i apply the brakes. What should i do. ... 2002 Suzuki XL-7

Pedel goes to the floor no brakes at all


Sounds like seals have gone in master cylinder and leaking the fluid into the servo thats wy you cant see it but if you take cylinder of you will see maybe you can buy new seals instead of complete cylinder to save a few quid i am 99% sure that is th ... 1989 Buick LeSabre

Brake pedel goes to floor and does not return


... Volkswagen Golf

Brake pedel goes to the floor


Pump the pedal until it goes hard this is common when you push it back all the way just needs a few pumps to get it to extend back to the pads making contact with the rotor, is there any fluid leaking anywhere? is there brake fluid in reservoir? ... 2005 Chevrolet Impala

Is this vehicle worth repairing? My father purchased a 1998 Buick LeSabre which smells like mold (rust under seats and engine on all medal); air bag light won't go off; turn signals don't work auto; car STOPS for no reason - STOPS; really hot spot in middle/left side of steering wheel; no air conditioning; oil light won't go off; when driving sounds like emergency brake engaged; emergency brake pops up and down; gas pedel goes to floor for no reason at times; interior lights come on for no reaso


Check out popular mechanics auto , about dealers selling flooded cars, all the details are there ... 1998 Buick LeSabre

I have a 2001 Dodge Dakota that will not lock up the brakes. Everything has been replaced and it coasts to a stop. The pedel goes to the floor at full stop . Master cyl, prop valve, new lines, and compleate new rear brakes. This vehicle is equiped with rear ABS only


Master cylinter is shot is my first thought. if it has been replaced with a referb.. replace it again. make sure you bench bleed the master cylinder before putting it on.. if it's new, you have a ton of air in the lines.. bleed the pass rear first/ d ... 2001 Dodge Dakota

I changed the rear brake shoes and springs and now the brake pedel goes to the floor and is spungy


Sounds like you need to bleed the brake lines. ... 1994 Toyota Camry

Brake pedel goes to floor & no brakes. I changed rotors & pads 4 mos ago. Has fluid in resevior. Can't get to pump up.


Check the master cylinder. it can go bad without leaking. the fluid bypasses the internal cups causing a fall in the pedal. also if you broke the lines lose to do calipers you might have air in the system bleed it good. if not i suspect the master cy ... 1996 Ford Explorer

Soft pedel on brakes goes to floor


... 2001 Ford Escape

Brake line leaking. Had to remove the brake line and now the hole won't line up right and the brake goes to the floor. I filled the brake fluid and it was leakig out the side. found a washer and put it on and it stopped leaking but the brake pedal still goes to the floor. When tightened the hole goes a little past where it should.


... 1998 Oldsmobile Bravada

Brake pedel goes to the floor when started (new master,rears and fronts)


Brake booster has a leaky seal in its diaphram ... 2001 Mercury Sable

Brakes pedel goes to the floor sometimes - 2008 Ford F 250 Super Duty 4WD


... 2008 Ford F 250 Super Duty 4WD

Losing brake fluid, pedel goes to floor


Do you keep adding fluid all the time? if so then we have to find out where the fluid is going. please respone to me question and i will help you thrugh this thanks ... 2000 Chevrolet Impala

Wwith engin running brake pedel goes to the floor


Your have air in your lines and brake fluid may be very low.. ... 1994 Ford F350 Crew Cab

Brakes Brake pedal goes to the floor.Has to be pumped to get brakes to catch at all,and in a couple of seconds the pedal goes right to the floor again.Doesn't seem to be any leaks or loss of fluid. i have a '89 F-350 dulley. when i pump my brakes the brakes don't catch after flooring them, it sounds like a vaccuum suction when i press on them. i tried bleeding the brakes but they don't have air in them.


Bad seals in the master cylinder ... 1989 Ford F 350

Brakes had to change the left rear caliber. tried to bleed the brakes and lost all braking. Then I changed the master cylinder and got some braking back, but pedal goes all the way to the floor. Again tried to bleed and again lost all brakes. changed the master cylinder again (froze) and have brakes, but still the pedal goes all the way down to the floor. Any idea how to fix this?


The brakes just need to be bled properly which take 2 people or a bleeding pump,Please tell me how you are bleeding the brakes. ... 1998 Audi A4

I am drying to diagnose brake problem with 1993 Pontiac Bonneville SE. The brake pedal goes all the way to the floor when pressed. The brakes grab at first, then the pedal slowly goes to floor and brake power decreases. I checked pads and that's OK. The reservoir fills beyond fill line when brakes applied. I suspect the master cylinder, is that correct?


Yes it sounds like the problem it could maybe be the brake booster if the brakes are better at a higher idle but there is a check valve on the brake booster that cost 2.00 too replace that runs off vacume i would replace first ... Pontiac Bonneville

98 wrangler - brake pedal goes all the way to the floor. The master cylinder and all brake lines are free of leaks. I'm not losing any brake fluid anywhere. I replaced the booster that is attached to the master cylinder and fire wall and still the brake pedal goes all the way to the floor. With the engine running I can push on the brakes really fast and I get a little resistance. Before I changed the booster I replaced the master cylinder thinking that was the problem. Can anyone help?


... 1998 Jeep Wrangler

05 canyon brake problem. I replaced front and rear brakes and front drivers side hub and now my brake pedal goes to the floor. I even bled my brakes. no problems bleeding by pedal still goes to floor


... 2005 GMC Canyon

Brake pedal goes to the floor after putting on new brakes and bleeding the brakes. This is a lincoln LS, 2002 model. When motor is not running there is good brake pedal with no travel, after you start enging it goes to the floor


Bleed the brakes. RR,LR,RF,LF\015\012You have to have a hose on the bleeder valve going to a bottle, to catch the fluid. \015\012Put someone in the car,start engine,when the person says DOWN,you crack open bleeder valve and close before t ... 2002 Lincoln LS

Brake system for 1980 300sd. Replaced front brake assem and pads. The brake pedel still to the floor. Replaced the master cylinder and hve some pedal off the floor. I rebuilt the vacuum pump but I still do not have a a hard pedel like it should be.What could be the answer to my brake problem?


... Mercedes-Benz 300-Class

We are bleeding the brakes on my 2003 kia spectra. the right front and the left back are doing exactly what they should be doing- getting pressure then when releasing the bleed screw the peddle goes to the floor and brake fluid shoots out.. the left front and right back on the other hand do nothing but sputter and maybe drip a little brake fluid and the brake peddle goes all the way to the floor every pump. what is going on? ps: there is no leaking in or around the master cylinder


You should try presher bleeding them,,,its way easyer,,,keep the fluid toped up as well ... 2003 Kia Spectra

Brake peddle goes to floor. can pump to get "some" braking action but goes to floor again. emergency brake works perfect


Have someone pump brakes n hold peddle down while u loosen valve air will come out then fluid tighten valve repete few times on each tire ... 2004 Dodge Stratus
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2908 seconds