Having problems with your 2004 GMC Envoy ?

2002 GMC envoy mirrors move up in reverse - 2004 GMC Envoy

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for 2004 GMC Envoy

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

2002 GMC envoy mirrors move up in reverse - 2004 GMC Envoy


... 2004 GMC Envoy

2003 gmc envoy - will not move when i put in reverse


... 2003 GMC Envoy

2002 gmc yukon xl 2500 4x4,driving slid into dutch(snow),switch to 4x4,started rocking car out, was not going too good,stopped and got tractor to pull me out. Once out car would not go in forward gears(none),switch back and forth into diff modes,4hi,4lo,all tract,2hi. Reverse works in all modes just no forward. tried d,3,2,1 gears also no luck. Drove home backwards 6-8 miles. does not try to move forward when shift into d, no u-joint clink nothing! sound like electronic mod.??


... 2002 GMC Yukon XL

2003 gmc envoy will not move in drive or reverse


Check the fluid level. are there any codes? ... 2003 GMC Envoy

My check engine light stays on, my instrument panel dings while driving the vehicle, the gauges drop to 0 and back up again, it switches back and forth from unknown driver to driver 1 repeatedly, abs light and brake lights come on, loses track of fuel level range - sometimes just showing 3 dashes. . . all while driving my 2004 gmc envoy


For quirky things like that, I' look first at your ignition switch (common problem). Not the switch the key goes into, but it' located under the steering wheel column cover, on the bottom (black). Did your key get stuck in the ignition too at som ... 2004 GMC Envoy

I am having GMC ENVOY model 2004,I was driving at 120km/hrs on way to my office suddenly my vehicle slow down when I try to race but I could not then slow down to the side & stop the vehicle when I was trying to race, put the gear but the vehicle is not moving. I tried reverse gear, neutral & direct .my engine is on & I am trying to race but I am trying to put in the gear is not working.please suggest me what is the problem.


The 2004 Envoy has a problem with the transmission failing. It could be an electronics problem, but it sounds as though there is no pressure in the transmisssion, perhaps a bad pump. ... 2004 GMC Envoy

I have a 2007 yukon with keyless remote. It should move the driver's seat and outside mirrors to the memory position when the unlock button is pressed (and the DIC for remote mirrors is set to "on"). But after programming the "1" button on the door for my seat and mirror position, when I unlock the car with the remote, it returns the seat and mirrors to a previous position. How do I program the remote to return to the "1" position I've chosen?


... 2007 GMC Yukon XL Denali

How to move front cv axles on gmc envoy - 2002 GMC Envoy


... 2002 GMC Envoy

Replacing ignition coil #1 on 01 gmc envoy - 2006 GMC Envoy


... 2006 GMC Envoy

2007 GMC Envoy p2440 bank 1 code - 2009 GMC Envoy


... 2009 GMC Envoy

I pulled the #1 spark plug and put my finger over it and had someone turn the motor over until the pressure moved my finger. I then used a socket and moved it the rest of the way by hand until the mark on the pulley was lined up with tho 0. I put a straw inside the #1 cylinder to make sure the piston was at TDC and the piston was not near the top. I had someone hold the straw and turned the motor by hand and got the piston to the top and was pushing the straw out but now the mark on the pulley i


Yes it can be wrong is the crank in right it could be 180 degrees backwards i have seen it happen. but i dont know how much work was done before this problem email me some more info and i can help you further ... 1985 Chevrolet Chevy

03 gmc envoy with 5.3 140000 miles. Oil pressure reading fluxuates between 0 and 40. When problem first started pressure read 80. When vehicle was new it stayed at midpoint (40) vehicle has plenty of oil. if you rev engine or increase rpms it goes to 0 and stayes there. let off and it jumps around like it did when started (0 to 40). No engine pecks while running. Display indicates low oil pressure and stop engine. orange light (check gages) comes on when at 0. any ideas. Service engine has not c


There may be a loose wire or the gauge or sending unit may be going bad. The first thing I would do is to hook up a temporary oil pressure gauge, not using the old one at all. With this watch gauge while driving and see what readings you get. If the ... 2003 GMC Envoy Xl

The car moves on gear 1 but doesn't move on D or 2. The reverse and neutral working just fine. Please help.


... Cars & Trucks

Curb Assist I have a 2003 GMC Sierra SLE 4x4 with curb assist. Both mirrors turned down when I put the truck in reverse, but the other day the passenger mirror stopped turning down as much as it did. It turns down very slightly, but not as far as it once did. Did I change a setting, or is something wrong? The power mirror adjustment works in a full range of motion.


... 2002 GMC Sierra C/K1500

My GMC sierra side mirror is loose on from the amr. The mirros is fine it is the little swivel that is looses and the mirror constantly moves. I am unable to remove the mirror to get to the problem.


I just spent about 2 hours trying to resolve the same problem, and discovered that there doesn't appear to be any way to repair the mirror without purchasing a whole new one. There a 3 screws you can access by slanting the mirror to the extemes in b ... 2000 GMC Sierra

Lexus es 300 2006 the outside mirrors won't move when in reverse gear


... Lexus SC 300

2005 GMC Envoy - mirror blinker out


... 2005 GMC Envoy Xl

2001 GT300 skyline electric mirrors will not move when in reverse and when car is remotely locked mirrors do not fold away


... Nissan Cars & Trucks

My Nissan Maxima 1985 has encountered a problem.. i was casually driving down the road when the engine just stopped... tachometer stopped and i tried roll starting it while it was moving but it just registered the wheels as moving around but the engine still not running... now its been sitting alone for about 1 and a half months and i did a tow start on it but it just came to a sudden stop(wheels locked up) so i tried in reverse and it did the same thing... any idea what it could be? things i kn


Put the gear stick in neutral and try turning the engine by hand, making sure that the crank is turning. If the wheels are locking when you are roll starting is a good indication of the motor refusing to turn ... 1985 Nissan Maxima

Transmission My car will not move in D4, D3 or 1 gear. Car will move in reverse and gear 2. How should I proceed?


... 1991 Acura Legend

My heat blower does not work in positions 1,2,3 on my 2003 GMC Envoy Can I replace the rheostat myself ? where is the rheostat for positions 1,2,3, located ? can I get access to the blower fan under the dash or behind the glove compartment myself or will I need to take it to the Dealer ?


You can do it you will find it down by the passenger foot are just under the glove box.it has two screws holding it in place and one electrical plug. note if fourth speed is also not working this means a fuse is blown out the fourth speed is wired t ... 2003 GMC Envoy

My 2000 Buick Lesabre won't accelerate... The past few weeks it's been shaking as the gears change, and i was on cruise control on the highway and i pressed the brake and then couldn't accelerate again. I pulled over, and the car doesn't move at all in reverse, drive, 1, 2, or 3... but the engine revs, but nothing moves! Please help!


This is caused by Worn out Clutches inside the Automatic Transmission. You will need a Rebuild on the Tranny. This will stop these Problems. ... 1995 Buick Regal

Hi: I just bought a 1991 Volvo 740 GLE Wagon with around 280000km. It worked perfectly fine by the last owner. I took it home and drove it for around an hour on a hilly trip. At one point I was stopped at a red light, and when I tried continuing the car would not drive. The engine was running fine, but the car would not move. When I switched to 2 it did not move either. When I finally switched to 1 it continued driving. Shortly after, the car would not drive at all in any gear, not even Reverse.


Chances are you have an internal issue with the transmission. Most likely you have a solenoid that one day will fail and it wont go back into gear again and you will end up stranded. Since this is an electrical issue and not a hydraulic issue a tran ... Volvo 740

2004 GMC Envoy XUV. MIdgate window is down and will move only about an inch upward and then stops. removed inside skin, don't see anything broken. Can manually lift the window about 2 " up before it stops. The green cable that goes from the window regulator has a spring loaded end at the top and when that compresses the window stops moving. Any ideas Gary Sunsten [email protected]


Its the faulty window\015\012regulator.\015\012\015\012You will need to replace the regulator assembly in the midgate.\015\012\015\012I will mention the procedure as follows:--\015\012Midgate In ... GMC Envoy

1997 gmc p30 step van transmission only performs when engine is cold; I can move foward and in reverse for a short period of time, and then have to turn the engine off for several minutes before I am able to start moving again.


Does it make a whining sound? if so the filter may be clogged, replace the filter and note what debris is in the bottom of the pan. you may get it to live a little while longer if indeed the filter is stopped up, but it will need trans work. ... 1997 Chevrolet C/K 3500
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.8426 seconds