Having problems with your 2004 GMC Envoy ?

I have a GMC Envoy that is giving me p601 code which I know is a PCM memory problem?? can this computer be fashed to get rid of this problem or do I need to replace the PCM ??

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

You will have to replace the PCM and it will have to be reprogrammed or your vehicle will not start.You will need to take your vehicle into the dealer and they will replace the PCM and program it in the vehicle.Hope this helps.Good luck.
Repair Help & Product Troubleshooting for 2004 GMC Envoy

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a GMC Envoy that is giving me p601 code which I know is a PCM memory problem?? can this computer be fashed to get rid of this problem or do I need to replace the PCM ??

You will have to replace the PCM and it will have to be reprogrammed or your vehicle will not start.You will need to take your vehicle into the dealer and they will replace the PCM and program it in the vehicle.Hope this helps.Good luck. ... 2004 GMC Envoy

Engine light has been on for the past 3 years. The car runs fine!! I have fixed numerous sensors as directed by different mechanics in hopes of fixing the problem. The latest mechanic tells me that the cam sensor needs to be replaced. Problem with that is that I replaced the cam sensor last year! Another tells me it is the catalytic converter. This has been going on forever, but I need a sticker this month and need to get rid of the stupid light.

The only way to turn off this light is with an obd2 code scanner ... 1996 Ford Taurus

I replaced my car's PCM (computer) because of stall during driving issues, and to get rid of the check engine light constatly being on (I can't pass emissions in my city with the light on). I replaced it wth a refurbished pre-programmed PCM, after install, and battery hook up, all dome lights, doors, came on, but no crank. I read up on the security features and can't get around the damn thing. Any thoughts?

You shouldve removed the lightbulb from the instrument cluster to remove the CEL.Dealerships do it all the time for engine light\\air bag lights.as for info, you should go to LHForums.netthere are many people there ... 2001 Chrysler 300M

Where is the 2003 Pontiac Mini Van computer or brain located? My van has the check engine light on. (I got taken to the cleaners & billed almost $1000 and the problem still exists.) The mechanics have replaces 2 sensors; GM has replaced the wiring harness now they say I need a new computer? (A $500 Job.) I'll do it myself get a used one, & if it's just a matter of unplugging the harnesses & plugging the new one in I can do that. ( if I can get to it?)The Van runs rough, stalls & skips backfires

Hi.The main control module is called the ECU, PCM or ECM. The ECM is replaced only after testing the module and finding it faulty. The PCM does not fail very often.Replacing the ECM is no straightforward operation. After repla ... 2001 Pontiac Montana

I was told that my engine computer was damage. And that the memory keeps fulling up. This present throttling problem once the A/C is turned on.It the computer is reset by removing and replacing the battery terminal then the problem is corrected until about 400km afterwards where the same issue arise until the computer is reset again. Do you think I need a new computer?

Def'.. sounds like there is a problem with the ecu holding data, had the same problem with a Skooby. If you replace the ECU then ensure you get the correct data codes which are on the side! not sure if your immobiliser is coded to the ignition key! i ... 2002 Suzuki Grand Vitara

Hello, The fuse that works the cd player/radio has blown and I need to replace it. I went to Jay Car Electronics howver they said I would need to show them the fuse that needs to be replaced so I get the right one - only problem is that I have now lost the fuse! It is the fuse that is on the top right hand corner, from my memory it was light blue. Do you happen to know the name of the fuse that I need to ask for? Thanks, Vanessa

Don't know it toyota puts the fuse info on the fuse box access door,but the fuses are all different colors for all the different amps.10AMP=RED 25AMP=WHITE so on and so forth.There are two different sizes as well Regular and mini.You could go to wall ... 2003 Toyota ECHO

I have a 1996 camaro, 3.8. Have really been having alot of problems, idle seems low, i get a code P300 ( random misfire) and a Cam shaft sensor code, I replaced the cam sensor 2 times, changed the plugs and wires, Changed the PCM, also fixed and replaced vaccum lines, Replaced wires that was damaged from the harness to the Cam sensor, We ran injector cleaner in last tank of gas, Our idle is running about 8-900 rpm with it going up and down at cold start. I guess my question is how do i get rid o

You can disconnect the battery for about 2 min and that should clear any codes that are stored in in it or take it to autozone or someplace that will erase the codes for you i hope this helps ... 1996 Chevrolet Camaro

I have a 2006 Ford Focus ZXW SES Station Wagon with a computer that is showing the "crash data memory full" and "driver-seatbelt pretensioner open circuit". I changed the pretensioner assembly but the airbag lights remain on. I tried to clear the codes after I restart the vehicle the airbag lights still remain on. I have diagnosed this with the computer for the code "B1231 crash data memory full". I would like to know what is the cause of this and what I need to replace to fix this problem.

2003?? thinking??????? take the speedo head out and see if their is a circuit on the plastic printed circuit with 3 diodes and a transistor with 2 resistors ,if their is change this speedo head or the printed circuit with this on it ,and throw the me ... 2003 Ford Focus

Hello, my 525i bmw complitly cuts sometimes, i just bought it and i took it for a ride home , of 230 miles, and it stop twice on the way. It has the sign with the gas exhaust problems on .Took it to the service and the guy put in the computer find some errors and fix them by computer and light went off, Second day i went back because the light is on again , he told me about a pice that i might need to replace which get's the air in if i remember correctly but today he saw it was replace that par

I agree with you it does sound weird!\015\012\015\012What year of manufacture is your vehicle?\015\012\015\012If the scanner reads fault codes, they are in relation to faults which should be attended to. \015\012Just er ... BMW 525

95 4cly camry sometimes shuts off when gas peadl is depressed. new sparkplugs and wires, new distributor cap and rotor. new fuel filter, pulled code from the computer it said TPS problem replaced that to and still have the same problem. checked fuel when i replaced filter fuel pump working ok. Reply to this post 1 2 3 4 5 6 7 Add Comments Please type the numbers below to complete your post: Can't read it? Try a different one. Type the numbers here: OK Need additional assistance? ?Get Answers fro

Bad ignition coil. Replace. ... 1995 Toyota Camry

Hello ! As I bought my VW Golf Mk4 (model 2003) 1.6 FSI 16v few months ago, I have just realised there are some problems that need to be solved. First of all, the engine light came on and after computer check it turned to be NOx sensor fault (error codes 17441 and 17443). Although I would like to get it replaced with a new one, I have no money at the moment and have to delay it for a while. Will I face any additional problems if I keep driving my car ? Besides the NOx sensor fault, it works just

17443 Nox signal implausible, 17441 Nox sensor Signal too low, check the latest software versionis running on the engine ecu. the Nox sensor is located to the rear of the cat and has a control box bolted to t ... 2003 Volkswagen Golf

I have just built the motor in my 99 z71 bored 30 over flat top pistons ls1 cam ls1 heads shorty headers ive replaced it hooked up all the wiring harness i thinki got them all i replaced the starter and computer when i try to start it i dont get power to the key my gages wont turn on but the lights turn on windows roll up and down i messed with it and got it to turn over about 4 or 5 times the it clicked and back to nothing does any know were i need to start i figer its electrical problem maybe

... 1999 Chevrolet Silverado 1500

98 concorde lxi runs great but when you turn it off when it is hot then try to start it 5-10 minutes later it wont start. Turns over but won't fire, sometimes it will sputter a little. 30-45 minutes later it starts right up. it is as if it needs to cool down. It acts like fuel is not getting to the injectors. Fuel pump was already replaced. when it is cooler (ambient temp) there is never a problem. No codes are present in the PCM and under hood temp seems very hot when problem arises. I am suspe

Ignition MODULE needs replacing on the distributor ... 1998 Chrysler Concorde

I replaced the 350 in my 1988 c/k1500 with a 327. i changed the fuel injection system with a carburetor And i put an external pump on it. It getting fuel and has spark but wont start. Do i need to get rid if the computer?

Yes. And you will aslo have to completly rewire the ignition system. ... 1998 Chevrolet K1500

Replaced the computer in my 2001 Wrangler this morning. Mechanic used a re-manufactured unit. Receipt says Evap code showed up on first run but gas cap tight) Now Check engine and Check gauge lights both on and battery losing charge (down to 9% in 20 minutes) My favorite people at Autozone say this is known problem with Jeeps and computers with on-board regulator. I need to know what to say to dude who put the bad thing in tomorrow so that it gets fixed.

Just tell them you think the computor is bad ... 2001 Jeep Wrangler

I have a 2003 Toyota Corolla CE. It has an automatic transmission.I had been having problems. My check engine light came on. Took it to the shop and did a computer analysis. It came up as shift selanoid. When got in there it was 3 different selanoids that needed to be replaced. There was all sorts of crud at the bottom and needed to be serviced. I was trying to find out if I was getting a fair price.

Generally if the guy doing the job took the time to show you the s..t in the pan while it was down replacing 3 solenoids would have saved you taking the thing apart again so whatever!!!! ... 2003 Toyota Corolla

1998 Dodge Ram Diesel 24 valve. Died while driving, Took to injector pump specialist. He replaced transfer pump said injector was good. Ran diagnostic and pulled a PCM code (needs replaced) Took to Dodge they replaced PCM and still will not start. They swear it?s the injector took back to injector specialist and he says the injector is good. He says the PCM needs replaced (still). I am fed up with this, two mechanics cannot agree on what problem and I am sick of replacing expensive parts that do

... 2000 Dodge Ram 3500

Starting problems This car will just crank and crank but never start. Its getting fuel, Its been tuned and had all of the ignition parts replaced. Could it be the computer chip in the key maybe lost its memory?

I have a 95 sub 1500 and it has no chip in the key just the standard old metal gm key. ... 1995 GMC Suburban

Hi,my horn is not working on my 05 Escape took it to the shop today and was told that I was getting fire into the horn but no fire coming out and needed to replace the computer at a cost of $680.00 does'nt sound right to me.Do have any solutions for my problem?Thanks

... 2005 Ford Escape

Need to know how determan what to do to get the gas gauge to work. replaced sending unit, computer, and put in new cluster. where is the problem?????

Sending unit you mean Fuel Pump? if so I would check float on fuel pump. don't know what you drive, year and model would help. ... Dodge Ram 1500

I have a 1999 dodge durango, bad motor I changed it I am not a dodge person. The motor I bought to put in , was supost to be a 99 318, I find out after I put it in it is a 1994 360. need less to say I have a problem, I put everything off the 318 on the 360 everything test good bot I cant get any spark to the plugs, I have replaced the cam sensor, crank sensor coil, cap, rotor and spark plugs. the computer shows no codes. That is next? THANKS JAKE STOKES [email protected]


1999 Lazy Daze motor home, 68,000 miles, always got regular maintenance and repairs. A 2 months ago the computer went out and was replaced by a certified mechanic. We are now 1500 miles from home and the engine has started burning oil at the rate of a quart every 150 miles. We would like to get it home, but also need an idea of what the problem might be before taking out across the hot desert.

... 1999 Ford Super Duty F 450

Code is 606 pcm fail what bad is it ? I know I need to replace the computer but if I don't what is the mayor problem can I have or is only the check engine light on

It means that the engine will not run efficiently, you may have reduced power and you may be damaging the catalytic converter. ... 2004 GMC Envoy

Code 700 I have a code 700 problem on a 04 ram 1500 4.7. At first it would act like it was slipping. So I had a mech take a look and he changed out the trans sol. pack. The code still came up but it will shift good to ok until it gets warm? He said the computer is messing up and needs to be replaced?

That is very possible. If the solenoid is good, it could be computer. There is also a torque converter clutch solenoid that can go bad. Usually engine codes will show this error. ... 2004 Dodge Ram 1500

Computer says that i have two ignition coils out and lets me know which numbers they are, but after attempting to replace these twice, i still have the problem...do i need to get a motor diagram to assist me with this, or is there an easier way?

When you fix something that lights the "Check Engine" light you need to clear the computer. You do this by undoing the NEG battery cable for 10 minutes and then reconnecting it. Otherwise the old warning will show for 25-40 startups before the old ... 1999 Mercury Grand Marquis
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.9473 seconds