Having problems with your 2004 Dodge Ram 1500 ?

2004 dodge ram, 1500 2wd 4.7ltr. stopped truck, went to start. cranks only and wont fire. pulled code p0522. replaced oil sensor. still wont start

Posted / edited by AnonymousUser on : 11-12-2017

Answers :

We will have to pinpoint what the engine is missing.\015\0121) spark.2) fuel.3) compression.\015\012All three of these are tested when the engine is being cranked over. There are two way of checking for fuel. Fuel pressure and fuel trigger. Both are very important and must be present for the carto start. Fuel pressure is self explanatory. You just hook up the gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine cranking over, this light must blink. This is the signal to the injectors from the computer. You can have all the fuel pressure in the world, but it wont matter if the injector is not pulsing gas into the cylinder like it should! Compression tester, spark tester, fuel pressure gage and noid light are all accessible at your local auto store. All three tests play a very important part in diagnosing a no start condition. Be extremely careful when doing these tests. A simpler test would be to see if it runs on starting fluid. If it does, then you know you have spark and compression and you simply have a fuel delivery problem.\015\012if every things check out ok.then other possibility to check out is \015\012DOes the PCM ever ground the ASD relay? If not, we first need to check ALL POWERS AND ALL GROUNDS to the pcm to be sure its awake. After that, then we will need to make sure the cam and crank sensors are producing a good signal when cranking the engine over and that the two signals are in sync with each other.\015\012This will help. Thanks please keep\015\012updated.please do rate the solution positively .thank you for using fixya
Hi, ill try to help. Did you try to disconnect the battery for about 30 sec and reconnect??? 522 code is oil pressure sensor problem. Disconnect may work for reset, but there may also not be oil pressure? This is the only solution I have right now. Maybe another expert has more info if the disconnect does not work.
Repair Help & Product Troubleshooting for 2004 Dodge Ram 1500

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loading ...

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0123 seconds