Having problems with your 2004 Chrysler Sebring ?

I hit the right side mirror against a post on my car shalter and it fell out.It does not appear to be damaged in any way. How do I fasten it back in?

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Use 3M brand double sided trim attaching sticky tape, it is available from any auto paint supply store and some auto parts dealers like Napa and Carquest auto parts. Before you apply the tape use 3M brand Adhesive cleaner on both surfaces, use two strips of the tape about as wide as the mirror. You can also buy a mirror ready to stick on from the dealer parts department.
Repair Help & Product Troubleshooting for 2004 Chrysler Sebring

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I hit the right side mirror against a post on my car shalter and it fell out.It does not appear to be damaged in any way. How do I fasten it back in?


Use 3M brand double sided trim attaching sticky tape, it is available from any auto paint supply store and some auto parts dealers like Napa and Carquest auto parts. Before you apply the tape use 3M brand Adhesive cleaner on both surfaces, use two st ... 2004 Chrysler Sebring

My drunk friend fell and knocked the passenger side view mirror. off of my 2002 jaguar x-type...the metal bracket doesnt look to be damaged but i dont know how to get it back in the hole? it looks like there is a plastic piece on the bottom of the mirror can be removed for repairs but i dont want to break something else trying to fix this..is there any possible way i can do this myself?


All door mirrors are designed to fall off (if you hit a pedestrian)so they are just push fit(no screws). ... 2002 Jaguar X-Type

Cable to power window appears to be off the pully. How does it go back on? The driver's window went all the way down. Will not stay up. Cable appears to be dangling. How is it routed back to the pully. I need a diagram.


That is a cable driven window regulator and when the cable comes un done then it is broke and un repairable. you will need to swap it for a new one. very common issue with this style regulator and is a sealed system with no repair unless you real get ... 2002 Dodge Durango

1998 Ford Escort..removing C.V joints,,I had to remove the right side to get off the left side,using a screwdriver..when i hit the screwdriver the left side came off easy,,BUT the screwdriver fell out of the center of the tranny and the gear in the tranny fell down to the bottom of the tranny..Anybody know a easy way to get it back up,so i can put the C.V joint back in..Or do i have to take out the tranny now?


Most likely it'll have to be tore down and reassembled.sorry ... 1995 Ford Escort

Hi I recently purchased some headrest DVD players for my BMW X5 2004 (3.0L D ). The black leather front seats have a hard back panel which appears to be stuck to the seat - is this correct ? I need to remove the seat backs to feed the cables through and am concerned that if I damage the backs I won't be able to refit them. Are there clips to detach ? Thank you for your assistance.


Hi there,\015\012\015\012I believe this link should be of some help.\015\012http://evolvedperformance.com/?p=131\015\012\015\012Razvan ... 2001 BMW 5 Series

Ever since I've had my 2002 trailblazer the back driver's side window won't go up or down. At times the window seems to fall down about an inch or so and I can full with the switch and can eventually get it back up. Well it fell down a little today and I did what I always do, and it went all the way down.This is the first time ever, and I've had it like 3 or 4 years. And now it will not do absolutely nothing, it's stuck completely down. You can hear the motor trying to put it back up, but it doe


Your window is driven using a cable drive system. kinda like bicycle brake & gearshift cables.\012these systems are prone to break. i just wonder why it made noise for so long without breaking.\012what you probably need is a window re ... 2002 Chevrolet TrailBlazer

The interior rear view mirror just fell off of my 2002 saturn sl, could someone tell my the simplies way to fix it. i tried placing it back on but it is not fitting on there properly. thanks


Hi Vicky.Your rear view mirror,as it is off is thear a small metal stub on the windshield? If so it means that the clip must be changed.If not then you will have to purchis rear view mirror glue and stick it back on. PS : WHAT IS BEHIND YOU ... 2002 Saturn Sl

PO1684 NO AUTOSTICK FUNCTION,ALTHOUGH IF SELECTED IT WILL COME DOWN AUTOMATICALLY ALL THE WAY TO FIRST=THEN REMAIN IN FIRST AS YOU EXCELERATE = WONT UP SHIFT UNTILL YOU AGAIN RETURN TO D . IN D MODE IT APPEARS TO OPERATE PERFECT. + IF YOU PULL IT BACK INTO AUTOSTICK AFTER IT ACHIEVES THE 1-2 SHIFT IT WILL NOT UPSHIFT BEYOND 2 BUT WILL COME BACK DOWN TO 1 WHEN YOU SLOW RIGHT DOWN.


The P1684 code simply means that the battery has been disconneted within the last 50 engine starts.maybe thi ... 2004 Chrysler PT Cruiser

Can i bypass ac on saturn vue 2002 when replacing the serpntine belt. i was old it spins freely enough on its own is this true. its the only way the belt will fit back in place without replacing it. there is no damage. it came off so it should slide back on. i followed the diagram to the letter but it want fix without the bypass. help!


... 2002 Saturn VUE

I'm working on a 2003 Buick Lesabre's rear brakes. It appears the bottom of the caliper is fastened with a 12mm bolt -- the top of the caliper doesn't seem to have a head to put a socket on or a torx head. I will be needing to put on new pads AND have the rotors ground, so the rotors will need to come off. The front brakes appear to be more normal with a larger pair of metric bolts holding the caliper on -- BUT the backs look forein to me.


The top of the caliper has a stud. Once you remove the lower caliper bolt, pull the spring-loaded upper portion of the caliper towards the inside of the car. It will come out and you have to pull the caliper off the stud. There is no upper mounting b ... 2003 Buick LeSabre

My 97 firebird digital odometer stopped displaying mileage. It lights up, but nothing is available. Also a few days prior I was trying to install an aftermarket stereo, and some wires touched and shorted out the stereo, possibly the speakers and other things. Basically I'm wondering, did my stereo flub damage the odometer, and is there a way to tell if I damaged the wiring in the car when it shorted? I tried putting the factory stereo back in and it wouldn't work either. And the fuses are perfec


... Cars & Trucks

I too have no sound from rear speakers in my 2007 Avalanche...I bought speakers thinking they were simply not there. Went to install them and found that there all of a sudden was sound there. Put the rear door panel back on and it still worked until the next day. No sound from either side on rear again. I read somewhere that a seatbelt could be damaging a wiring harness causing it so I took off the panels covering the seat belts and found no way that the harness could be damaged from the belt. W


... 2007 Chevrolet Avalanche LTZ

I just purchased a plymouth Neon 1998. When i picked up the care i drove it out there long gravel drivway and on the way out the oil pan plug fell out allong with all the oil. I parked the car and found the plug but i cannot tell how it is to go back in. There is no screw catch and it seams to big. I may have to just go buy a manual for the car. I need to get it off the high way wondering if someone can post a sollution.


Some dumb mechanic or make believe mechanic stripped out the unit. Go and purchase yourself a rethreading tool, retread the pan, then purchase a new plug. Otherwise you will have to replace the oil pan. Which if purchased from a junk yard cost about ... 1998 Plymouth Neon

I have a 96 cadillac deville with charging problems. It starts up with 13-14 volts but while driving it fluctuates up and down, eventually working its way down to low voltage. on occasion it may go as low as 9.0 volts and then shoot back up to 13. The alternator is about 5 months old and has been tested and retested by several shops always coming back good. The battery is 4 months old and is a 1000 cca duralast gold battery. The wires all appear to be in good condition and the PCM brand new. Eve


... 1996 Cadillac DeVille

I am removing a radiator from a 1997 Ford Explorer 5.0 L engine. I have got everything done until I realized that the A/C coil is attached to the front of the radiator. It appears that it will slide out to one side as there are some plastic prongs that appear to slide into some grooves on the radiator housing. Will it slide out without disconnecting any A/C lines? What is the best way to do this without damaging anything?


It will come out without disconnecting the ac just try to tie things out of the way by prying and use a couple of bungy cordes to give youself clearance. ... 1997 Ford Explorer AWD

Appears like the small wire headlight holding bracket came off of the plastic housing that holds the bulb in place. This occurred when changing the bulb. I can push it back on but not sure if this will shake loose after a while? Is this now damaged or can I possibly apoxy it back on, or maybe even screw it to the housing unit....or ? Seems like the bulb has been replaced often and is worn. Thanks Bill


You should be able to epoxy that piece back on, just make sure there isn't a opening into the housing as this will let water in and will burn out the bulb contuinally. That's what seems to been happening as you noticed alot of activity on that light ... Hyundai Sonata

I have a 2001 2.0split port DOHC and the #3 cylinder shattered, bending the push-rod and damaging the cylinder wall in three places leaving deep gouges and about a 1'' crack just in the cylinder wall of the block. So far the head appears to have made it out ok with the exception of a few indentations from the piston pushing debris into it and I believe it can be surfaced and be ok. I'm not sure as to the best way to handle the block damage.


That block damage sounds like it is too deep to be honed out. You probable are going to need to replace the block. ... 2001 Ford Focus

The passwenger side view mmirror is shattered on my 95 Oddysey. I purchased a factory replacement. The mechanism works fine and I removed the broken glass from the plastic plate that holds the mirror. My problem is that I cannot figure out how to remove the backing and apply the new mirror,which is attached to new plastic backing. How does one attach the new assembly? There is no way to fasten the screw into the pivot joint that moves the mirror, through the glass.


May have to remove the whole mirror assembly to access the backside to reach the screws. ... Honda Prelude

I WAS IN AN ACCIDENT IT WAS JUST UNDER $5,000 IN FRONT END DAMAGE. WHEN REPAIRS WAS COMPLETED I PICKED UP VEHICLE I DISCOVERED BEFORE I LEFT MY ON DISPLAY DASHBOARD LIGHTS WAS ON AIRBAG,LIFTGATE AJAR, TCS,SECURITY MODULE DANGLING..ETC...LONG STORY SHORT IN COURT NOW COULD ANY PART OF THIS CAUSE AN AIR SUSPENSION PROBLEM WITH MY VEHICLE MY 2004 LINCOLN NAVIGATOR SUSPENSION SEEMS TO BE OUT OF WHACK WITH DA BACK WAY UP IN THE AIR. I TURNED THE ON/OFF SWITCH IN THE BACK..WHAT I SHOULD I DO NEXT ...


Take it back to the shop and have them fix it. seems like an electrical/electronic problem ... 2004 Lincoln Navigator

Is there a way to make headlights work if the problem appears to be in the bcm? the car is a 2001 pont. sunfire we have been all through the wires and fixed any and all chafes back to the fire wall. at the headlight switch there appears to be power for low beams but they wont come on , they flash when placed in gear and they flash when the remote door locks and even with the alarm is activated. so the drl and low beams dont work high beams do work and i have power on all 3 headlight wires. My su


... 2001 Pontiac Sunfire

95 bonneville the ignition switch locked up completely so i changed the cylinder on it and when i almost had it back together i noticed that the key wasnt going all the way back to the lock position but it would turn foward so i traced down the rod that goes from the cylinder switch to what appears to be a electrical switch well i took the rod out of it andthe key switch works perfect my thing is i dont know really what that box is really called and one side has like a big wire and the right sid


The item at the end of the rod is the ignition switch. what you changed was the lock assembly. (you turn the key, it moves the rod and puts the switch in the correct position to do what you want it to) ... 1995 Pontiac Bonneville

Friend called me today and hes been working on this car dont know make or model it has the ford 3.8 liter and had the upper intake off of motor and he thinks the pcv valve may have fell into the intake so he says he could not find the old when going back together with car and just bought new one so the car runs but has slight poppin noise while accelerating so what damage could this do or has it done so far and also can he just pull the upper intake back off and get it out.


IF YOU DROP ANYTHING DOWN THE INTAKE.YOU NEED TO REMOVE INTAKE AND GET IT OUT OR YOU GOING TO HAVE A DAMAGE VALVE WHEN IT GET JAMMED BETWEEN IT. ... 1993 Lincoln Continental

My 1994 850 driver?s side seat has been reclined and will not return. I can hear the motor running but not engaging. There is a 9 mm square shaft that runs left to right and appears to need to rotate when returning the back rest to position. Is there a manual way to return the back rest?


Take the motor out and you should be good ... 1995 Volvo 850

The tail latch on my 97 Jeep Cherokee is stuck in the locked position. The tail gail is open and will not close because the latch is in the closed postion. I am trying to understand how to get to the mechanism of the latch without damaging the back plastic panel. Is there way to access the latch mecahnism without compromising the plastic back panel on the lift gate door?


My 98 has this sometimes... The only thing I do is use a screwdriver & Flip the lever till it is all the way open again... As for the plastic, Mine has broken almost every screw mount hole but still really cant get to it easily...M... (EVI ... 1997 Jeep Grand Cherokee

My back window behind the drivers side, i hit button to roll down and it went down all the way and an hour later my driver window fell down too on its own. motor sounds like it works on driver window but does nothing and the back one the motor sounds like its out. 2000 buick century


It is a common problem for the window regulators to fail on many makes of cars nowdays,and that sounds like what going on with your car.They will have to be replaced as an assembly. ... 2000 Buick Century
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.0045 seconds