Having problems with your 2003 Mercury Grand Marquis ?

Need driver seat removal instructions to replace seat frame.

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

It is pretty simple, there should be 4 bolts holding the seat to the floor one on each corner of the seat. Once you locate the seat rails you will see the bolts. Just unbolt them and make sure the electronics are un plugged then just pull the seat out and set it aside.
Repair Help & Product Troubleshooting for 2003 Mercury Grand Marquis

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

1999 Ford Explorer Sport. Cracked Lower Seat Frame front of left side hinge attatchment/recliner handle. Lower seat frame needs to be replaced or welded. I am working out of town and can't get to a shop during business hours. Need temporary fix. Can I swap Complete Driver and Passenger Seats? Can I remove Both Seat Assemblies, Remove Slider Tracks, then replace Passenger Seat on Driver's Slider tracks?


... Ford Explorer Sport

Need driver seat removal instructions to replace seat frame.


It is pretty simple, there should be 4 bolts holding the seat to the floor one on each corner of the seat. Once you locate the seat rails you will see the bolts. Just unbolt them and make sure the electronics are un plugged then just pull the seat ... 2003 Mercury Grand Marquis

Need to replace driver seat belt latch . Do you need to remove seat to get to seat belt bolt . It seems to be fastened to side of seat frame


Yes, the seat has to come out , you may possibly hae to pull the seat frame apart. make sre the vehicle is not equiped with seatbelt pre-tensioner. ... 2001 Ford Ranger Regular Cab

I need to replace my drivers side front seat it has a broken frame. can i remove all front seats and go in with a 60 40. right now it has captains chairs with a console in the middle


Yes you can.Check your local salvage yard for either tahoe or yukon split bench seats.They will bolt right in with no drilling required.You might have to pull back the carpet to locate the holes. ... 1997 GMC Suburban

Saab 9-3 2004 convertible. I need to replace the audio amplifier below the drivers seat. need removal instructions. Joe


... 2004 Saab 9-3

How do I remove a 2002 Jetta driver side seat? Non-power.Trying to replace a Airbag connector. Aware of airbag issues. Just need to remove seat. Can only see two small nuts in front floor area with seat pulled back all the way. is that all? no rails? They two nuts look to be square. I can't see much else. Do i need to remove carpet?


... 2002 Volkswagen Passat

My seat frame is broken. I want to buy a used seat and replace it totally. How do I remove the old drivers seat and replace it with a new one? It is a manual seat.


You will have to unbolt the seat from the undercarraige of the truck. If you look under the vehicle in the proximity of the seat you will see the nuts to remove. ... 1999 Ford Explorer

How to remove the drivers' side glass from the regulator- looks like rivets need to be drilled out, can't get to one. Bought a regulator/motor all-in-one assembly from American Muscle as replacement. Can't seem to find detailed instructions anywhere, none provided with replacement- Ehow too generic, no instruction on window removal, only motor. 2001 Mustang


Check out what a replacement looks like at the ford dealer (compare)\015\012You may have to do the rivets to remove, and again to put in a new or old working motor.\015\012May be able to bolt back together\015\012Check window heigh ... 2001 Ford Mustang

I have a 1998 Buick Park Avenue Ultra. I need detailed instructions and diagrams to replace the AC/Heater blend door Actuator for the Driver side. Also where is the Outside/Inside Actuator located, and how can I test it to verify it is working correctly? Also I need detailed instructions and diagrams to repair the power seat track motor drive assembly because the seat does not move up and down or tilt. Thanks, Jeff


Alright ready. Unfortunately I can't provide the diagrams online. I can provide the help when you have questions while working on this and will respond as quick as possible when you get stuck and can't figure out what to do next. What you need to do ... 2000 Buick LeSabre

I need diagram and directions to change the ratchet on the drivers seat in a 1996 ford bronco. the bottom frame is broken and need to take it apart to weld the frame as you can not find a decent seat to replace it.


Follow these steps to easily remove the driver's seat from ford bronco\015\0121) Lean under the seat and unclip the harness that connects the seat belt sensor to the seat. You may need to use a small flathe ... 1996 Ford Bronco

Instructions to remove Driver Seat and replace the drive cables for the seat movement.


Is this easily done? Seems simple enough but worried I won't be able to get the seat back in place... ... 1997 Volvo 960

Driver Side Power seat quit moving forward and backwards. Is it difficult to remove the seat and replace the motor? Do you have instructions to remove the sesat


Honestly, \012\012If you are considering this as an option, you probably have all the tools, a simple set of sockets will get the seat off - but use long handled tools as they are very securely fastened. Once you have the seat off, I would act ... 2000 Dodge Grand Caravan

The driver's side power seat in our Lincoln Town Car is in the full back position and will not move. The problem started as a ratching sound in the motor and the seat moving in jerks rather than the normal smooth operation. The switch was working because the seat was trying to move. The fuse is also good. After reading several of the previoius posts for this same problem it sounds like I need to remove the seat and power seat transmisssion. How can I get instructions on how to do this?


Year?\012\012sounds like gear or seat track is damaged. ... Lincoln Town Car

I need to install new seat channels on my driver's bucket seat on my 1974 coupe deville. How are the channels removed? I want to pull the whole seat, replace the channels and reinstall all the power moters, etc.


Well first you buy a chiltons manule from chapters then you follow th steps inside ... 1974 Cadillac Eldorado

2004 Volvo XC70 - I need to replace the seat belt buckle on the driver seat. How do I remove the seat?


... 2004 Volvo XC70

2001 Lincoln town car replace lens on driver side mirror. Need instructions to remove bad lens. And replace new one. It is a heated electric mirror.


... 2001 Lincoln Town Car

I need to replace the driver side rear window regulator/motor. I cannot figure out how to remove the window from the plastic cradle the window rest in. It seems to be some kind of plastic. washe Instructions say remove bolts securing the window but there are no bolts. Help. Thanks


It is a pin that you just push out. Save the pin and such though some regulators don't come with new ones. ... 2003 Ford Focus

NEED INSTRUCTIONS ON HOW TO REMOVES SEATS IN MY CHEVY S10 SO i CAN REPLACE CARPET. I also need to find some kind of Electrical Diagram for the under the dash wiring that is above the pedals tucked under lower dash.


ASAP ... 2000 Chevrolet Blazer

During timing belt replacement, the instructions indicate that if the oil sprocket is removed, then a plug has to be taken out and .300 pointed screw driver inserted about 2.5 inchs to ensure a counter wieght is in the correct position. Question is, is that oil sprocket was not removed, does that step need to be taken? If so, the drawings I found a Kia Tech info are not clear enough as to where the plug is.


No the counter weight will remain in place if the sprocket was not removed ... 2004 Kia Optima

Need to know how to remove electric window motor unit and cables for "001 Seat Ibiza passaenger door from 2nd hand door (bought from scrap yard) and replace in my car. On 4 bolts but hidden and to big to slide out of spaces on inside door frame. also how do we fit it in? Ibiza is same set up as VW - will have to pick that as you do not have Seat in your list below


... Volkswagen Golf

I need to replace the drivers side rear passenger seat belt in 2000 toyota avalon


... 2000 Toyota Avalon

Driver seat has broken and needs to be replaced. I am looking for a replacement seat so if you know of a good place to get one would love to know. Next when I do get a replacement seat I need to know how to replace it, can you help? Hope so


Generally you can find another seat at your local scrapyard. They aren't difficult to remove. There is a bolt at the end of each leg that holds it to the floor. Try to find one from a similar year so if it has power, the harness plug will match. ... 2002 Jeep Grand Cherokee

Replaced drivers side rear shock, put tower strut end in 1st, on the lower end there is less than a fingers width of room before the tab is flush with split knuckle? which is holding the lower end, do I need to remove the upper tower strut end and fully seat the lower end and then put the upper end in its correct place??? The only other way I can see to do it is to possibly loosen the knuckle so the base of the shock wont bind.


Do you have it lifted up,if so you need to pull the suspension down to clear the bottom of the strut.really hard but your this far you can do it no problem ... Geo Metro

Need to remove 1999 Honda Odyssey driver power seat to weld frame


... Honda Odyssey

My drivers side seat belt will not retract on my 1997 mercedes s320. Can you help. If I need to replace it, how do I remove the panel. James Howard


Sounds more as if the retraction spring would not be engaged.There are two springs in the W140 seatbelt. The comfort spring is engaged during driving when the carkey is in the whole and the belt is fastened. As soon as you either pull out ... 1999 Mercedes-Benz S-Class
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.5184 seconds