Having problems with your 2003 Jeep Wrangler ?
03 wrangler wont start
\015 03 wrangler, manual trans, 4.0l engine.\012wont start. gauges work, radio works, lights are good. turn key and get nothing. \012swapped starter relay w/good one. \012checked all fuses in fuse box under hood, and fuse box behind glove box, battery cable terminals are secure and corrosion free, connectors/wires at starter are secured, banged on starter solenoiod.\012still no start.\015
A problem on the ignotion?
wifi obd tool for ipad iphone
wifi obd tool for ipad iphone
Repair Help & Product Troubleshooting for 2003 Jeep Wrangler
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My 95 Wrangler wont start when the engine is cold. it will crank but not start unless you give it gas. It starts fine when its hot (90 degrees) outside or i've already started and drove it that day, but in the morning you can crank it for a LONG time and it wont fire up. We replaced the ECM last year when it was giving us problems but we had different symptons and then it worked fine. We also replaced the starter last year. The battery is good, we have put a bottle of fuel injector cleaner in it
I was told that if the jeep all of a sudden didnt start on its own without giving it gas, then next time you start it hold the pedal all the way to the floor and it resets something in the computer and sets you back to normal. ... 1995 Jeep Wrangler
93 Jeep Wrangler sat for several months, and now wont start.. Think it's fuel related... Starter fluid will start it but wont stay running... Do you think a fual filter will solve the problem?
... 1993 Jeep Wrangler
I have a 97 wrangler with 4cyl that wont start. Drove it in the garage and 2 weeks later, went out and it turns over fine but doesnt even try to start. I checked fuses, fuel to injectors, for loose wiring. I had no spark, and when the ign is turned on I can feel the ASD (auto shutdown relay) click. I replace the PCM computer, still wont start. Any ideas?? Dickniehu531
If you're not getting spark, then your ignition coil is bad. Everything else will work, but this is what fires off to the plug wires to the plugs. You should have a coil pack or a distributor cap. If the rotor or the distributor cap are carbon marked ... 1995 Jeep Wrangler
89 jeep wrangler 2.5 4 cylinder wont start. It turns over strong but wont catch even with starting fluid it just goes whir, whur, whir, etc. I have spark. thought it might be injector but it seems like it should still try to fire with starting fluid or gas put into throttle body. Any ideas?
Check the ignition timing as it appears that the firing order is wrong. Make sure that the cam shaft is turning as it could be the belt broken ... Cars & Trucks
Jeep wrangler I have an 1989 jeep wrangler. I bought it drove it 2 hours home and did great. I took it out once to the woods and creek and thus my problems started. I can go fire it up right now and it will drive like a tank for about a mile and then it starts to sputter and will eventually die. No matter how much you push on the gas, it wont go and will die. After that it will start right back up and take off and do the same thing. I changed the fuel filter (because it was sitting for aw
I have an 89 with a 4.2 carb and experienced identical problems that were fixed with carb rebuild and through cleaning. ... 1989 Jeep Wrangler
Voltage meter. the voltage meter on my 1997 jeep wrangler shot up to 19 while i was driving it. it wont start anymore. i did replace the ECU about 6 months ago so i dont think its the voltage regulator. could it be the altenator? (in 97 wranglers the VR is in the ECU) all my lights and stero will turn on, but when i go to start it everything shuts off. if you have any ideas on how to fix this or what t do i would be happy to hear it
Make sure you battery terminals a very clean too mine did the same thing and it was just corrosion ... 1997 Jeep Wrangler
Having a issue with my 1988 Jeep Wrangler starting. At times it will start right up but at other times it will not start at all. It will sputter in when trying to start it but wont turn over. All wires are good, battery is good, starter is good. Not sure what to do.
Those 88's run a 2 barrel carb that is notorious for causing minor issues like this. Sounds like your carb and/or fuel filter is clogged...this is common due to the age and rust accumulating inside of the gas tank (normal for older vehicles). When is ... 1988 Jeep Wrangler
My 1990 jeep wrangler starts up and runns fine while ideling but as soon as you start excelerate it bogs down at about 2400 rpm,s and if you floor it it really starts to bogg its like it wont excelerate at all at 2400 rpm's or more ive changed plugs , wires, fuel filter and checked vacume lines but still noy sure of the problems it is a strait 6 4. liter carburated
Hey, i just had about the same problem. evry one was given me advice ,have had the coil check? i did and mine was on the low end they said the on ohms would be 8.64 and mine was 8.95 so i went for knew very cheap part at 14.00 changed rotor and cap. ... 1990 Jeep Wrangler
I have a 97 jeep wrangler, its a 2.5 liter 4cyl 5 speed. It has a starting issue now and again, it won't turn over lights and all electrical turns on but it just wont turn. When fuses are checked the start fuse is blown. I replaced the starter thinking that this may help the situation but unfortunately it hasn't, my jeep still seems to be burning up the start fuse. Could there possibly be something such as a short? that causes this to keep happening? please help i'm tired of pushing my jeep and
First thing you should do is check the starter draw. A simple way of doing that is to put a volt meter on the battery and crank the engine over. Volts should not drop below 9.5 while cranking.Since you replaced the starter, though some can be defecti ... 1997 Jeep Wrangler
I have a 2005 Jeep Wrangler, I just recently replaced the starter but now when I try to start it, it wont start but if I dont push the clutch in it starts. What could be the problem?
Safety interlock not working could be a missed wire or the starter could be wired incorrectly..... ... 2005 Jeep Wrangler
I bought a 92 jeep wrangler 4.0 auto it would either try to die or would die at idle even when warm i put new plugs wires,cap,rotor,air filter,fuel filter and oil,and filter fixed some vaccum lines it needed all of this badly runs alot better but still doesnt wants and does die at idle so i took the cat conveter out and cleand all the guts out it started right up i let off the gas started to die and then did now it just turns over and wont start
Replacing the throttle positioning sensor on the throttle body will be the most helpful thing to do. There is plenty of test proceedures showing on YOU TUBE how to sheck the TPS sensor as well\015\012\015\012Here is one website with plent ... Jeep Wrangler
94 jeep wrangler wont start fuel relay
... 1994 Jeep Wrangler
My 1988 jeep wrangler 4x4 2.5 L fuel injected will not start. It has new spark plugs and is getting gas but wont start.
... 1988 Jeep Wrangler
95 wrangler wont start
Please refer to this solution: http://www.fixya.com/cars/t1016149-1989_jeep_cherokee\015\012\015\012It's probably the A/C relay under the hood indeed. An ... 1992 Jeep Wrangler
89 jeep wrangler wont start
Sounds like the drainback valve inside the pump is shot...try just turning the key on and waiting a minute and see if it starts that way. ... 1989 Jeep Wrangler
2008 wrangler x with 3.8 v6 32,000 miles just purchased driven home 750 miles then parked in garage a half hour later tried to start it but wont crank just a slight click, lights work gages work, radio works,also it is a automatic trans. tried putting in neutral no start,tight connections on battery post are clean looked at connections all tight fuses look good
... 2008 Jeep Wrangler
Recently bought a 97 wrangler, it ran a little rough when i first started it but only for about 15 or 20 seconds so i tryed to tune it up. replaced the plugs and plug wires and cap. now it sounds worse then before and wont even start up?? HELP
You better check the wires going to the plugs, is sounds like you may have got them switched aroung. Make sure you have the proper firing order it should be stamped on the top of the intake ... Jeep Wrangler
1989 jeep wrangler wont start no spark 4.2l Jeep was running ok. i decided to take a look under the hood tightened up some loose valve cover screws and did some clean up.. it started. the next morning i get cranking but no spark...i checked coil, plugs,rotor and all cables everything looks ok what happened?
... 1988 Jeep Wrangler
98 jeep wrangler. no spark, jumped it and it started, drove it, shut it off, replaced battery, wont start after that. checked fuses, plugs, wires, cap and coil. 2.5L.
Your altenator or main engine relay, ignition relay or starter relay could be bad. Another reason motor won't turn over is due to bad, dirty, loose negative ground wires.If the engine isn't getting a spark, then check crank shaft position ... Jeep Wrangler
1988 Jeep Wrangler wont start. I dont have any spark? I recently replaced the gas tank and may have possibly ran the fuel pump out of gas. But I can hear the fuel pump running it just seems to be making a lot of noise. The jeep ran fine then one morning i came out to start it and it just wouldnt fire. took a plug out a found no spark
Try your camshaft possition sensor. If it is the same as my problem I just had to replace that and it started right up. Oh and mine was built into the distributer assembly. Take off cap and pin it's the plastic thing at the bottom. Should just pop ou ... 1991 Jeep Wrangler
Hi I have a 1998 jeep wrangler that I just changed the exaust manifold on I numbered everything and think I did a good job putting it all back together. My problem is the fuel gageand alternator gage wont come on and the vehicle cranks over but will not start. It has electronic fuel injection. I sprayed some starting fluid in one of the spark plug holes and something fired off so I think Im getting spark but no gas. I pushed on the shrader on the fuel valve and some gas came out , so I have gas
What engine? ... 1998 Jeep Wrangler
Jeep wrangler will not start have changed every sensor checked and changed fuel pump and bought new computer for nothing so changed out engine with one running now it wont start must be electrical need schematics for 93 jeep 4.0
I'm assuming you checked voltage through the auto shutdown relay?If you attempt to read codes, does it read? (even if it shows nothing except that it's working) Is there a factory security system? (if so make sure there isn't a broken wire in ... 1995 Jeep Wrangler
89 wrangler just repl clutch slave then jeep wont start acts like dead bat. checked bat,fine. repl starter,cleaned contacts. just clicks like bad bat. will start with a push. guage looks good too while running.
These were not made with a safety switch on the clutch, but far as the starting issue. I am expierencing the same thing. Replaced the clutch put it back together and it wont start. when I jump the starter by placing a jumper wire across the two st ... 1989 Jeep Wrangler
I have a 94 jeep wrangler that wont start. The auto shut down and fuel pump relays wont close. I've replaced the power train control mod. and the relays. Just after it stopped working when i went outside the next day i heard the fuel pump relay chattering ever sience the nothing.
... 1994 Jeep Wrangler
Hi i have a 95 jeep wrangler when i start driving its fine and after a while the clutch peddle wont come back up and wont shift
Sounds like a bad clutch master cylinder mabee low on fluid check that first ... 1995 Jeep Wrangler