Having problems with your 2003 Hummer H2 ?

How to install upper ball joint on hemmer h2 2003

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 2003 Hummer H2

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I replace the upper Control arms on My 1979 chevy 1/2 ton pickup. I saw a replacement control arm that has the bushings and ball joints already installed. I'm trying to save the high labor cost that this involves. I can replace the ball joints myself but I know that you need special tools to replace the bushings. Would I still need to try to get this tool since the new upper control arms have them installed already?


Since the new arm comes with the bushings, there is no reason to get the tool to install them. Upper arms are relatively easy to install...just a bolt out, bolt in operation as the springs aren't involved. Support the suspension under the lower contr ... 1978 Chevrolet C1500

How to install upper ball joint on hemmer h2 2003


... 2003 Hummer H2

2003 GMC Sierra 2500HD with a front end vibration. Vibration is a very distinct popping that is synchronous with ground speed and causes the left front tire to deflect. Could this be the front differential. So far I've changed out the ball joints, upper control arm, the left drive axle, and had the front drive line balanced with new u-joints installed. I'm at a loss.


For my truck 2003 GMC HD I had a vibration and I changed my rotors they were worped and that solved my problem ... 2003 GMC Sierra 2500HD

What is the process of replacing the upper ball joint of 72 chevy nova. Do you have to press the upper ball joint in, like the bottom ball joint. What tools do you need in replacing the upper ball joint. Thanks


If you are replacing with new....you have to grind off the old if it is rivited in...to install...it's new hardware and it is BOLTED in. No special tools. ... Chevrolet Nova

2000 grand cherokee how to install a upper ball joint


... Cars & Trucks

How to install upper ball joint on passenger side on a 1995 chevy blazer s-10 model 4wd vortext V6 2 door


... Chevrolet Blazer

2004 Lincoln Navigator when making slow turn wheel fully turned in either direction the truck comes to a complete stop while in gear. I have to press the gas hard to move. I had a strutmasters kit installed 2 years ago so no more air ride and upper control arms, ball joints and brakes changed 1 day ago right control arm was worn bad problem still persists any advise or help would be appreciated thanks.


... 2004 Lincoln Navigator 4x4

How to install upper ball joint - 1991 Honda Accord


... 1991 Honda Accord

How do you install a rear upper ball joint - 2002 Chrysler Sebring


... 2002 Chrysler Sebring

Step by step instructions for do-it-your-selfers. I have a 1995 Buick Roadmaster and need to replace the idler arm,shocks, sway bar bushing kit, upper and lower ball joints. I have already installed one side of the inner and outer tie rods.


You will need to split off the idler arm's shaft from the center link after you remove the nut and cotter pine with a fork slitter then undo the bolts from the frame from the idler arm \015\012\015\012the sway bar bushings are removed by ... Buick Roadmaster

After installing both upper and lower ball joints on the 4wdr model, I am unable to get the drive axle to go all the way back in. It keeps hanging up at the snap ring and it doesn't move freely enough to get a good head start to jam it in. Any suggestions?


A rubber hammer and some elbow grease. this will knock it back into the front diff. ... 1999 Chevrolet Blazer

Installation of the upper and lower ball joints on a 1999 ford ranger ???


\015\012Ford Ranger Ball Joints 1993 through 1997Ford Rangers from '93 to '97 2WD have an "I-beam" front suspension as opposed to the upper and lower control arms that most vehicles have. The '93 to '97 4WD Rangers don't ha ... 1999 Ford Ranger SuperCab

How to install upper ball joint - 1989 Mercury Cougar


\012jack up car -remove tire\012support car on stands\012put jack under lower control arm with a little pressure\012remove carterpin-remove castle nut on top ball ... 1989 Mercury Cougar

I need to install an upper and lower ball joint on my 2000 Lincoln Town Car


Uppers are riveted on and the lowers are pressed on ... Ford Lincoln Continental

Front upper ball joint replacement


The dealer's answer (if you are interested).......\015\012\015\012The ball joint is pressed into the upper control arm and has a tapered stud for attachment to the steering knuckle. The ball joint stud is attached and locked into the stee ... 2002 Chrysler Sebring

What are the torque specs for the upper and lower ball joint mounting bolts on a 2001 2wd dodge dakota?


... 2001 Dodge Dakota

Upper & lower ball joint replacement


... 2000 Chrysler Sebring

Do Can you just replace ball joint or the upper arm assem?how to replace rear upper ball joint on 1996 Accord


... 1996 Honda Accord

Upper right ball joint replaced only 2 weeks ago along with u-joints. Garage says now upper right ball joint is riding up and cannot be seated properly. The car is now unsafe to drive with this issue? Can this be fixed without replacing the whole front end? Thanks, Dan


... 1995 Jeep Grand Cherokee

I am replacing upper ball joints on 2002 Dodge Dakota 4WD 4.7L I need torque specs for the 3 bolts that connect the upper ball joint to the upper control arm


... Dodge Dakota

Right front upper control arm / ball joint i have a 1998 honda passport that needs a ball joint in staled. i also have a 1999 isuzo rodieo that i bought for parts would it be better to just repace the hole control arm than to remove the ball jount and the intall the ball joint? and need to know where to go for a digram on how to remove eather of the item let me know what you think


... 1998 Honda Passport

I have a 2001 Dodge Durango 4.7L 2wd and need to replace the front suspension upper ball joints. I also believe that the end of the upper ball joint is riveted. Can you confirm this?


... 2001 Dodge Durango

The upper and lower ball joints on my 1991 lincoln towncar are worn out and I need to know how do I replace the upper and lower ball joints on my 1991 lincoln towncar


... 1991 Lincoln Town Car

2000 Grand Cherokee Upper Ball Joint


Illustration of control arm:http://www.penguinscouts.com/pics/jeep/Differential%20Suspension.jpgThe wishbone part, number 12, is the control arm. In the two ends, left side of picture, are the two bushings. These are pressed in bu ... 2000 Jeep Grand Cherokee

Grand Cherokee Rear Upper Ball Joint


... 2000 Jeep Grand Cherokee
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6908 seconds