Having problems with your 2003 Chevrolet TrailBlazer ?

No gps signal allowed when truck on

\015 When i turn on my trailblazer i lose all signal to my gps. i have tried an external antenna but the problem persists.\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

One other thing to check would be to see if the Onstar, has it's own fuse by chance & if yes, remove it & try yur GPS after.
Repair Help & Product Troubleshooting for 2003 Chevrolet TrailBlazer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No gps signal allowed when truck on


One other thing to check would be to see if the Onstar, has it's own fuse by chance & if yes, remove it & try yur GPS after. ... 2003 Chevrolet TrailBlazer

Gps signal tom tom 910 - 600 DAF Cars & Trucks


... DAF 600

Oxygen sensors I have a GMC sierra 1500 HD 2wd. I am try to wire in some EFIE's into my oxygen sensors to allow my hydrogen generator work on my truck. I need to know which of the four wires on my oxygen sensors is the "highside signal wire". Can you please help.


You have four on this truck. bank one sensor one is "black and white" b1 s2 "brown" b2s1 "light green" b2 s2 "red/white" good luck post as fixed thanks ... 2003 GMC Sierra 1500

NO GPS SIGNAL - Laguna Renault Cars & Trucks


... Renault Laguna

2006 mercedes e 350 no gps signal - Mercedes-Benz Cars & Trucks


... Mercedes-Benz Cars & Trucks

Here's my problem...My truck has four wires for my trailer, Red-Brake, Brown- Running lights, Yellow-Left signal and Green-Right signal. My trailer also has four wires, Yellow-Left signal, Green-Right signal, Brown-Running lights and White-Ground. My Question is, how do I get my brake lights to work on the trailer when all the wires are already used up for signals and running lights. I still am left with the brake wire on my truck. Am I able to get brake lights working on my trailer too?


Also try http://www.etrailer.com/faq-wiring.aspx. They have easy to follow directions and color codes. Plus you can order anything you might need. Hope this helps. ... 1987 Toyota Pickup

I HOOKED UP A TRAILER PLUG TO MY 2005 F250 SUPER DUTY DIESEL UPSIDE DOWN. FRYED THE WIRES ON THE TRAILER TO THE BRAKE LITES AND TURN SIGNALS, I REPLACED TWO FUSES ON MY TRUCK THAT WERE BLOWN. I STILL DO NOT GET POWER TO THE BRAKE LITES OR SIGNAL LITES WHEN HOOKING UP ANOTHER TRAILER. ARE THERE INLINE FUSES ON THE TRUCK WIRING THAT MAY HAVE BLOWN. THIS IS A FACTORY INSTALLED PLUG ON THE TRUCK. THANKS FOR ANY HELP.


Check the fuses in both inside and outside boxes. ... 2005 Ford F 250 Super Duty

I have a 2003 chevy hd duramax diesel, the right brake and turn signal work fine on the truck, but doesn't work on the trailer. I checked the right trailer stop and turn signal fuse and it is fine. I tested the 7 prong trailer plug on the truck and confirmed it is the truck not the trailer. Any suggestions?


I lost the light in the 2003 Duramax a few week ago.I just found a blown fuse under the hood in that big fuse panel by the driver side. It was the 15 amp mini fuse on the upper left hand corner. There was a white arrow pointing to it. Evidently someo ... Chevrolet 2500

I had a 2" ball for towing a boat installed on my 2009 Nissan Frontier. The boat dealer hooked the trailer up and the turn signals don't work on the trailer. He then tested it on his truck (GMC?) and the trailer turn signals worked fine. Went back to where we had to towing ball installed and that juice it getting to all necessary areas. Our truck turn signals had also stopped working for awhile but then starting working (something about a relay or delay). Do you have any idea what the probl


On older vehicles a tow harness could be wired directly to the vehicle wiring. On newer vehicles like yours, you need a module installed between the vehicle wiring and the trailer. Reason is that the original signal flasher (bi-metal type) has been r ... 2008 Nissan Frontier

1997 gmc sierra extended cab - turn on the right turn signal and all of the lights go on but do not flash on and off and get a single buzz from the flasher unit. turn on the left turn signal and all works well and flashes. this is with the truck running. turn the truck off and turn the key forward and both the left and right turnsignals function properly. any suggestions?


I would start by replacing the flasher, then if you still have a problem then check the bulbs for the rightside, make sure they all are good and the sockets are good, this sounds like a bad flasher. ... 1997 GMC Sierra

When i put on my brakes my turn signal lights light up on back of my truck. when i put my turn signal lights all of my brake lights flash on and off on the back. everything on the frount of the truck works the way it should. this is in a 1999 gmc 1500


... 1999 GMC Yukon

My 2004 Ram 3500 has all of the rear turn signal and brake lights working just fine, but when I hook up my 5th wheel lighting cable to the truck's receptical, the trailer's rear left brake and turn signal do not work. I have verified there is no power coming from the truck's receptical. I am told by a Dodge dealer that the engine control unit is faulty and needs to be replaced to the tune of 500 dollars! Is this really possible the ECU controls the receptical for the trailer lites?


Every part which is electrical is controlled by ecu.But if the receptical is not letting the rear brake and turn signal light to function.Then its either the problem of connections or the rear brake and turn signal wires are getting connected to rec ... 2004 Dodge Ram 2500

My 2005 Honda Accord GPS isn't getting a signal and there was an error message at one time. Now the screen is blank but once it a blue moon the GPS will run but then goes blank again. I still have the original disk in the DVD player but I'm wondering if I get a new disk will that fix my signal problem? If not, does anybody know what might be the problem. Jodi


... 2005 Honda Accord

@fhave a dodge dokota 1997 security system that will not allow the truck to start. does not have the chip in the key. this model was not equipped with the chip. Everything I can think of has been done to reset this alarm. Is there a way to diable it and allow the truck to operate.


Hi and welcome to FixYa, I am Kelly. Give this method a try. (NOTE you must have your radios' security code or your radio will go into the safe mode) \015\012You need 2 people for this. \015\012Disconnect the battery negative cable. ... 1997 Dodge Dakota

I installed hid kit about 8 month ago on a 2006 dodge ram diesel truck ! Everything was working fine until I had problems with rear signal light ! I took my truck to a dodge garage and they fixed the problem with my signal light ! But now all of the sudden I don't have a daylight driving lights nor low beam ! What is the problem with that ? Can you help me ?


Check your fuses ... Cars & Trucks

I have a 1990 Chev. Silverado truck. With the headlights off, the brake and turn signal lights work normally. When I turn the headlights on, the brake and tail lights do not work and the turn signals work but very slowly. I have replaced the tail light circuit boards, and cleaned and re-attached the ground connections to the truck frame at the battery and at the tail lights. With all lights/accessories off, when I put a volt meter between the negative post of the battery and the battery cable or


Are you a resident in the north eastern part of US?\015\012\015\012Clean the top post of the battery.\015\012Check for deform shape on the battery.\015\012A battery with incorrect acid / water mix will expand.\015\012\015\012Check the vol ... Chevrolet C1500

2002 f350 diesel 4wd super duty towing package- damaged plug cover on rear bumper for 7way trailer lights- left turn signal on truck works fine front and rear- will not work at bumper plug- i replaced plug at dealer ship suggestion- still does not work but truck signal works fine- unplugged new bumper plug in back to first connection near spaare tire mount- need to know where to go next to continue checking


... Ford E-350 Super Duty

1998 K3500 5.7 gasoline truck cranks, but will not start. Found low fuel pressure @ about 35 PSI. Replaced fuel pump assembly in the gasoline tank, started truck drove it home, but next day it wouldn't start, I measured fuel pressure, and now have 60 PSI fuel pressure, but engine will start, only if I pour in a little gasoline. This must be an electrical perhaps missing an input signal to the computer, since some common signal enables the fuel injectors to fire. My assumption is the fuel injecto


A few suggestions:Check the air intake and see if it is dirty, plugged air filter. you\015\012can clean with a good air intake cleaner...follow instructions on the\015\012can.Those years\015\012were noted for problems in the dist cap. che ... 1998 Chevrolet K3500

The truck was beginning to lose power as it was being driven and then after the turn signal was turned on the truck shut off. We then jumped off the truck and the truck died. Any time the truck was turned on the truck dies eventually.


Same problem with my 88. I changed the battery and the cables and clamps. Good alt belt. I think the alt is almost two years old. Could be the prob but the last two times the engine and brake like both came on when the alt was bad. Is it really cold ... 1985 Toyota Pickup

Turn signal periodically the turn signal will stop working. When the truck is first started the turn signals will work fine. After 5 or 10 minutes of driving the turn signal will stop working. The interior indicator will stay solid as will the exterior turn signal lights ( all lights work). We have replaced the fuse and the turn signal switch.


Now replace the flasher unit! Frankster016 ... 2002 Nissan Xterra

When I have a trailer hooked up and turn my left signal on both taillights blink on trailer-NOT THE TRUCK. then if I turn on the right signal it works normal. I checked the wiring for current ahead of the connection on the rear where the trailer wire plugs into and the problem is towards the front end. Also both fuses in the fuesbox are showing that both lights are blinking when the left signal is on. Can you give me any ideas where to look for the crossed wire or do you think the signal swit


Diagnostic times 3\015\012test truck on its own (never mind the trailer plug) if ok not truck\015\012test trailer on its own (use good batery or charger) if ok not trailer\015\012test truck trailer system now look for cross wire o ... Chevrolet Silverado 2500HD

2006 Ford Focus. Left front signal blinks fast, no left rear signal. Mechanic said, "there's a circuit board in the back that may need replaced?" I replaced the bulb, to no avail. Fuses are fine, I'm thinking if it was a fuse, I would have no signals at all? Maybe a continuity test, or take a test light to the socket? I was wondering if these cars usually have a similar solution to this issue, much like the solenoid was on the older Ford trucks. Thanks for any ideas you may have!


Hi!!\012\012When your turn signal indicator flashes faster than normal on either side, is telling you that you have a blown or defective bulb that needs to be replaced on that particular side.\012\012Just replace your left rear signal lig ... 2000 Ford Focus

I have a 2008 Dodge Ram that came with the tow package. When I plug in my 7-pin trailer (with electric brakes) everything works fine until I turn on the truck lights. When I turn on the truck lights, I loose both of my turn signals and brake lights on the trailer. The running lights stay on. I unplugged the brake controller and still have the same problem. I compared my trailer plug diagram to my trucks manual and everything appears to be wired correctly.


If you have amber signal lights & red brake lights, it's 2 separate circuits. You'll need to buy a small converter that you wire into harness to correct that. Not expensive, try autoparts store or RV/trailer sales, should have them. ... 2008 Ford F-350

We purchased a 1990 Chev truck with a viper alarm and the keyless remote is pretty well shot. How do we determine the model so that we can order a new remote? Many times we cannot get the truck to start because remote isn't working properly. After pushing the door lock button on the remote many times it will finally allow us to start the truck.


Unless the remote is identified by a model # then your going to have to get the model & S/N on the alarm control box itself. The remote should have a number on it RPNReplacement Part Number xxxx ... Chevrolet C2500

On my 2003 cadillac escalade the left turn signal works sometimes and sometime it wont flash or it just dont work at all. Even when I turn on my emergency flasher the only flasher that works is the right turn signal and not the left. I checked the bulb and the fuses which the truck mannuel states this might be the problem and nothing is wrong with the left flash fuses or the left bulb for the left turn signal.


... 2003 Cadillac Escalade Ext
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.3970 seconds