Having problems with your 2003 Chevrolet Impala ?
How do i replace my impala key cylinder??? i really need your help i took out the existing one buy cant put the knew one in :(
First make sure they look exaclty alike all the way around...if so push it in an twist it as if you are trying to crank it then it should lock in
Repair Help & Product Troubleshooting for 2003 Chevrolet Impala
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
How do i replace my impala key cylinder??? i really need your help i took out the existing one buy cant put the knew one in :(
First make sure they look exaclty alike all the way around...if so push it in an twist it as if you are trying to crank it then it should lock in ... 2003 Chevrolet Impala
Lost Keys We have recently lost our only set of keys to a 1993 Geo Storm. We called the dealer and they have two sets...one w/ notch and one without? They put in the info of the car and those two came up. Both cost $75 each. Basically we have to buy both in order to know which one it is. We are not allowed to return one of them, should it not be the key. What in the world is a notch key and why are there two sets? Can anyone help with this matter? We're lost here.
The lock can come from many different vendors, this kind of issue is very common on all cars whom ever makes them, I would buy one set and try it, you have a 50% chance they will be correct, another thing to do is call other dealers and ... 1993 Geo Storm
Starter problem a mechanic took off the starter and now quit. noone knows the wiring for the starter and i cant get it figured out. i put new cables new batt new starter. i put the wire the lites up when you turn the key to r post i put the wire that lites up when you engage the key to the i post. it turns over slow makes clicking noises in the solenoid and acts like its not getting enough juice. new batt to any help would be great
Wiring to the starter; large cable coming from the battery to the \012large post on the starter is direct current, hot at all times. there are two small wires that connect to the solenoid, one comes from the ignition.\012Look for loose connec ... 1996 Oldsmobile 88
I have a 1964 nova. bought a new ignition core and key, took the old one out and installed the new one. When i was done i turned the key in all positions to make sure it worked, I did this two or three times and then it stuck in the start position and the key will come out and back in but i cant get the cylinder will not turn in any position. Can you Help? Thanks. Mark
... Cars & Trucks
I have a 2004 chevrolet optra with 2.0 liter engine and a automatic transmission, first problem are I cant start the car on park mode I have to put on neutral to crank-it,second the I/C fuses always blow-up soon I put a new one, and finally the ecm fuses blow-up soon I put the keys on to start, thanks for helping me
... 2004 Chevrolet Aveo
Wont start Im planning to buy a 1996 4.6 hse RR with 149k for $2500. Good deal right, one problem it wont start. weve tryed to do the EKA, with no luck. Ive been doing a lot of reading up on this RR trying to troubleshoot, but cant figuar it out. We even put the key in the ing. turned to the II, then conected the battery. still no luck. The guy selling the RR said he lost the orig.remote/key. Reason why we tryed using the EKA.With the val/key w/o remote. could not having the key with the remote
We have just slved our mystery about not starting. It is the key. the no1 key is the 1 that is in synch with the comp. it will cost a fair bit to get new key and then have it aligned with systm. find original key, and you are laughing. Jean. ... 1996 Land Rover Range Rover
My nissan xterra was running but was sputtering. I stopped to put gas in it, when I was leaving it just cut off and wouldnt start again. The engine was turning over but wouldnt start. The mechanic said spark wasn't getting to the distributor. what part do I need to buy instead of buying an entire assembly. Would that be the ignition core or ignition module? He just said the distributor was bad and needed a new one. please help! I cant afford it and I need to get to my home town, my aunt is d
It sounds like your cam sensor. You need to find out if it has a code P0340 and/or P0345 first before you buy anything. You also need to know if there is injector pulse. Simply plug in a noid light in one of your injector connectors and spin the engi ... 2000 Nissan Xterra
I have a 2006 dodge grand caravan and i cant find but only one fuse box and it is the relay box under the hood. does anyone know if there is another one and where it is? My cruise control light comes on but it wont set. Took it and had a new button put on it but that didn't work. Any help would be greatly appreciated.
The circuit diagram that I have. Only shows the 1\015\012fuse/relay block,under the hood on the left fender.\015\012Fuse #24 a 20amp fuse is for the cruise ctl. But the way it appears to be wired. If the fuse is blown the\015\012lig ... 2006 Dodge Grand Caravan
I have a 2006 dodge grand caravan and i cant find but only one fuse box and it is the relay box under the hood. Does anyone know if there is another one and where it is? My cruise control light comes on but it wont set. Took it and had a new button put on it but that didn't work. Any help would be greatly appreciated.
You are correct.... the only MAIN fuse box is what Chrysler calls the integrated power module located under the hoodhowever, depending on what you are looking for, there may be inline relays for certain systems ... Cars & Trucks
I took the gear off of the cam shaft on a 2.9 nonturbo volvo s80 and now i cant find any markings to put the gear back on can some one help
Its a taper fit so no markings on the gear what you do is too look on the cam shaft at the rear as i seem to remember a slot but if this is the renault engine then the slot is at a angle and not horizontal with the head ,cannot remember more but i se ... Cars & Trucks
Turns over just fine but wont start and just backfires every so often took plug wires off and spun it over and only firing out of one of the coil terminals.we just put a new timing belt on and got timing off just a bit so fixed it and got it in time just where its supposed to be. now need help cant figure this out
If one coil is firing and not the other, then the bad coil pack has to be changed.If both coil packs don't work, then you would suspect module or crank sensor ... Daewoo Lanos
Im having steering coloumn problems. one day my car was fine then my way home from work i put my key in the ignition and it jus spins back but wont start..been messing with my car for a week already and cant figure it out...help!!! they told me it was a pin or something but they also say i need a whole new coulumn
You just need to take the car down the street\015\012to the closest repair shop to have it fixed\015\012\015\012You don't need a steering column ... 2001 Chevrolet Lumina
I put the key in the ignition and turn it forward to just before it turns over you know when the dash lights come on. when i do that the dash lights come on then very quickly shut off and i cant turn it over, then it acts like the battery is really low but no dim lights and just nothing. its not the battery just bought a new one and it works fine please Help??
Check the ground to the motor block and the fire wall. I know Chevy have a problem with grounds overheating around that time period ... 1991 Chevrolet S-10 Blazer
I just bought the jeep used we knew it had transmission problems,but figured we buy one so we did has the transmission put in. and it is still acting the same as before with the old transmission. it wont go into gear and when it does it wont seems like it will only go to second gear no more than 30-40 mph if were lucky. please help do you think it could be eletrical or the memory?
If you are certain the the new tranny was in good working condition? Did you inspect the old tranny before disposal?\015\012Are the tranny oil levels good and correct type?\015\012\015\012What happen when you shift in Low and High ... 1996 Jeep Grand Cherokee
I just took the alternator off as it was not working properly and i put a new one on... now i cant figure out how to loosen the tension to get the serpentine belt back on.. any help? thanks
One of the pulleys that the belt goes around (usually a smooth metal one) has a large nut on it; you put a socket on this (called the tensioner) and you are able to move it, slackening the belt allowing you to route it. Once you release it, it will ... Chevrolet Aveo 5
I brought a chevy caprice, it needed a distributor and the person who owned the car took the all the parts off to change the distributor. I put the distributor on the car but I cant find where two of the vacuum lines go but I think one of them go into the distributor cap, can you help my please.
One line will go to the vacuum advance on the distributor and the other will go to the egr valve ... ... 1995 Chevrolet Camaro
2003 1.9 tdi vw jetta has no power. bought a wastegate to put on turbo and cant get bolts off, rusted on. while looking for someone to get them off, car blew huge black smoke out tailpipe. tried turning car off and even took key out ran for another 25 ft. car will not start now and before this happened engine had 1 qt of oil low and now dip stick reads 0. please help!
... 2003 Volkswagen Jetta TDI
I HAVE A MERCEDEZ 190 AND THE KEYS ARE NOT TURNING IN IGNITION BARREL NOW THE STEERING IS LOCKED ALSO I HAVE TAKEN OUT IGNITION BARREL WITH STEERING COLOUM. i WOULD LIKE TO DISINGAGE THE IGNITION BARREL FROM STEERING BUT I CANT. ANYONE CAN HELP ME HOW TO REMOVE THE IGNITION BARREL FROM STEERING PLEASE AND CAN I FIX THE IGNITION BARREL OR I HAVE TO BUY A NEW ONE?
It is better to buy a new ignition barrel.it takes a special socket to get the screws out, once the screws are out they do not need to be replaced.buy new barrel,disconnect negative battery cable,disconnect wires from barrel assembly, remove barrel f ... 1993 Mercedes-Benz 190
My pass key fault light keeps flashing on and off. Tried to crank it and it wont start. So I took it to the Chevy dealer and they told me it would be $685 to fix it cause something is wrong with my Anti-Theft Security Module. I think that is a little to much considering they are the ones who put a new Ignition cylinder in for me before this happen. Can somebody help me or give me some insight on this matter?
Your problem is either on your transponder or amplifer ring you need to get someone who can read your key or test your amplifer ... 1996 Chevrolet Caprice Classic
2005 Honda civic I got home and took out the keys of my car, I didn't realize it was still in reverse once I took out the keys , so I put it in park(without putting my keys back in the ignition) then when I came back to my car to crank it, the key won't turn, and the wheel won't move, I cant push the brakes either.
The Key is not all the way turned to the LOCK position, once you put the key back in and turn on and off, then you will be ok ... Cars & Trucks
In the morning when i go start my car, the first time i put the key in and doesnt start it rotates but doesnt start i turn the key agian and it does,please help i put a new starter in alternater,water pump,heads cleaned up at a machine shop fuel pump,fuel regulator,fuel filter,pvc,160 thermostate.spark plugs,wires new egr and a K&N filter and rebuilt transmission and cant find the problem im growing gray hair from stress in can somebody please help me with this issue. thanks alot!
You moght check the ground straps and make sure the engine is grounded solid ... 1996 Chevrolet Impala SS
Imobaliser problem i have problem i have a saab 9000 1994. when you put the key in the ignition the imobaliser do,sent allways turn off. i,v tryed both keys. sometimes if you keep swopping keys it will start. any ider what is cousing this problem? i was told the keys or at lest one of them has lost it,s code. can you help. i have tryed as sugested by a garage to wiggal the key in the lock as that nite help. but it makes no dirferance. reply.
Maybe a neutral safty switch ... 1994 Saab 9000
I REALLY need help!!!!! i have a 1998 Ford Taurus and i was getting ready to leave last friday and put the key in the ignition and turned it to start the car and something just sounded like it broke or something and now when you put the key in the ignition, it will go "ding, ding, ding" and so on, but the key will turn all the way forward and the car will not start and it doesnt even sound like there is anything connected for it to start. i know its not the battery because i just got a new one n
It's the ignition switch.You will have to replace it. ... 1998 Ford Taurus
I have a 2202 Impala. Three weeks ago I attempted to start my car, nothing happened. No click,buzz..nothing. For about ten minutes I jiggled the key, put the key in and out of the ignition several times and cussed a lot. Then I put the key in one last time and BINGO the car started. About a week later same thing and then three days ago a third time. Can you help me?
Yes, this your anti theft security failing. Its having a hard time receiving the transponder signal from your key. When it doesnt get this signal, it turns off the starter to prevent theft. It basically thinks its getting stolen so it shuts down. The ... 2000 Chevrolet Impala
Hi Can any one help? i own an s reg escort gti i have had it 11 years and its just starting to play up, I have had the battery checked and alternator both are fine, I go to put key in ignition first turn you get all dash lights but as soon as i go to turn engine over i have nothing no power what so ever ???? I can get in it one day and she starts fine do my running about, get in to go next place and it does above ........ Can any one help?
Did u check ignition switch ... Ford Escort