Having problems with your 2002 Volkswagen Passat ?

How to removed an alternator on a passat 2002 1.8 L

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 2002 Volkswagen Passat

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to remove the alternator on a 02 passat 2.8L


You have to remove the entire front bumper and radiator ... 2002 Volkswagen Passat

How to 1993 vw passat vr6 alternator removal - 1993 Volkswagen Passat


... 1993 Volkswagen Passat

Removal of alternator on vw passat s tdi - Passat Volkswagen Cars & Trucks


... Volkswagen Passat

2002 vw passat 1.8 how to remove alternator


... 2002 Volkswagen Passat

Alternator removal on a 2002 vw passat


... Cars & Trucks

Can't remove bottom bolt on alternator on a 2002 vw passat


My neighbor came by with his 2002 Passat and needed the alternator replaced. Although this is the first time I've worked on one I was able to quickly figure out how to get the bottom bolt out . First remove the throttle body and using a special tool ... 2002 Volkswagen Passat

How to removed an alternator on a passat 2002 1.8 L


... 2002 Volkswagen Passat

2001 vw passat v6 2.8l transmission problem. After changing the alternator on a cold rainy day outside the transmission problem started. Off I remove the radiator and lost about half quart of transmission fluid. I place everything back together like it was. Fix sliding shift box dunring that fix I move the shift back and fork few time in order to place the slider on the shift with key turned on. Start the car all gears are selected red. Didn't know what it was I try shifting From P to R the ca


... 2001 Volkswagen Passat

97 Passat Dash Light Dimmer Test. I want to test the rheostat that dims the dash lights. I've removed the light switch assembly, it is in one unit, a rotary/pull knob for the parking lights, headlights and driving lights and a thumdial rheostat for the dash light dimmer. One large electrical connector goes into the back. I'd like to test the rheostat and need to know which terminals I need to check resistance between. alternately if I knew the wire color that went to the dash lights I could


Hi. There were some mid year changes to things like wiring diagrams for your Year Model. It is a great car too. Take down the vin number [ check for RECALLS while your at it] and call or go to the local dealer - they will fax or print out ... Volkswagen Passat

Serpentine tensioner bolt has sheared can this unit be replaced without removing the front of the vehicle .also is it true that the clutch in the alternator is the probable cause for this issue.2004 tdi highline passat


To remove a tensioner of serpentine routing belt isn.t nessecery to open vehicles front.Ofcourse this is difficult job but it is possible.About the alternator.s clutch-some issues in this year have clutch but it is very easy to check.Just look on an ... 2004 Volkswagen Passat

Anyone had difficulty removing the alternator on a 2002 vw passat?


No no problems at all,just strip the tings out of the way thats holding it in and stop trying to do a short cut ... Volkswagen Passat

2006 Escape 3.0 Alternator removal, lower air duct bolted to back of alternator. Any tricks to remove? Alternator will not come out untill this piece removed


... 2006 Ford Escape

1998 chrysler town & country 3.8l- how do i get the alternator mounting bracket off so i can replace the alternator? the current alternator's bearing froze, broke belt, can't drive to a repair shop, alternator is unbolted from the bracket but not enough clearance to remove without removing the mounting bracket. all visible bolts (3) have been removed from the bracket and still will not separate from the block. tensioner appears to be "pinching" the plate to the block. gentle use of crow bar flex


You dont have to take it off. remove the 2 15mm bolts and pry the bracket sideways w/ a prybar. This shortens your time. You most likely have a 90amp alternator so it should be small enough to slide through. ... 1998 Chrysler Town & Country

I am having trouble removing the Alternator from my 1992 Infiniti Q45. I removed everything the service stock manual said to but i can't get the Alternator to slide out due to the wire connections in the back and i can't find a way to get to the wire plug so i can remove it and replace the Alternator.


REMOVE ALL THE ALTERNATOR BOLTS REMOVE ALL THE BRACKET BOLTS THEN REMOVE BRACKET OUT THE WAY. THEN YOU CAN GET TO THE ALTERNATOR. ... 1997 Infiniti.5 Q45

Remove alternator chevy tahoe 2003. Need to remove alternator on chevy 2003 tahoe so it can be tested. Found the two bolts that fix alternator to the mounting, but after removing them, it won't budge. Belt tension may be holding it in place.


You have to remove the belt.Also you can have it tested on the vehicle.Once you have the 2 bolts off and the belt the alternator should come off.Good luck. ... 2003 Chevrolet Tahoe

Tring to install an alternator belt on a 1988 VW cabriolet. In order to install the alternator belt i have to remove the starter belt, which is on the outside pully. The alternator belt is on the inside pully and cannot slip over the outside starter belt without removing the starter belt first. My problem is finding all of the bolts on the starter in order to losen it and remove the starter belt. Ive replace several starters on american cars before, but never on a VW. Any suggestions you have wi


The air conditioning compressor is driven by the crank and that drives tha alternator. you have to take off all the belts in order to change the alternator belt. ... 1998 Volkswagen Jetta

Alternator Removal Having trouble removing the alternator from my father in law's Kia Optima. What is the best method to remove and reinstall an alternator?


What i heard that it is like removing it from under the car which is not possible without lifting the 4 wheels. Also you may want to first do this before removing the alternator, even the multimeter shows the alternator failed test. Simply go underne ... 2002 Kia Optima

97 Passat Ignition Switch Removal Replacing ignition switch on 97 Passat. I've removed the steering wheel, turn signal lever, wiper lever....... Everything to expose the switch. All wiring connectors have been removed as well as the cable to the automatic trans shift selector, and the socket head capscrew that clamps the switch to the steering tube has been removed. The switch will slide up over the tube, but probably less than 1mm, then is stops dead. I have not removed the steel bridge o


1 did you drill the hole as directed on the autozone site. If so then you flip the drill bit over and push in the hole to release the spring. It is step 10. I hope you read the directions on autozone. ... Volkswagen Passat

I HAVE A 1991 SUZUKI SWIFT SF416 G16B - i WANT TO TAKE THE ALTERNATOR OUT - I HAVE DISCONNECTED IT - BUT AM HAVING TROUBLE REMOVING THE ALTERNATOR FROM THE ENGINE BAY-i HAVE REMOVED THE WHEEL AND STRUT IN AN ATTEMPT TO LOWER THE CV AND REMOVE FROM UNDERNEATH - BUT NO GOOD - ICAN SEE THAT IF I REMOVE THE BRAKE BOOSTER AND MASTERCYLINDER IT WILL ALLOW ME TO LIFT IT UP AND OUT - OR MAYBE REMOVING THE CATALITIC CONVERTOR IS ALSO A POSSIBILITY - WHAT DO YOU THINK- MARK ECCLESTON


... 1990 Suzuki Swift

Can not remove the alternator on my 2001 Santa Fe The main pivot bolt at bottom of alternator seems to be long and can't be pushed back through the hole in alternator base enough to allow the alternator to drop down and be removed. Th square nut at the back end of bolt hits on the differential case. Is there a solution for my problem that I can't see. Bob M.


The mounting bracket where that long bolt goes through is slotted. By loosing the the nut on it slightly, then ply the alternator up out of the mount( nut and bolt still attached to the alternator ). ... 2001 Hyundai Santa Fe

I have a 1996 Mazda MPV where the engine fuse keep blowing. This happens after the battery was removed. Here is what happen. The alternator die one day. I replace the alternator and everything work fine. The next day when I drive the car I found the ABS light turns on every time I press on the accelerator. Somebody told me that the alternator that I put in may be defect. To find out if the new alternator is working, I shoudl removed the battery after the car is started. if the engine still


There is a diode in the alternator that you fried the instant you disconnected the battery....go get a new alternator. This was an acceptable test on much older cars, but not these days...... ... 1996 Mazda MPV

Im trying to remove (take out) alternator from a 99 mazda 626 the only problem im having is, the lack of clearance to completly remove the alternator either I have to remove AC condenser or remove down pipe from exhaust header, please help me


... Mazda 626

The battery goes dead in a day or two. Have checked resistance 0.75 ohm with all fuses removed same with hot wire removed on alternator did not remove main fuse in engine compartment has a new battery about 6 months ago alternator checks good. The only thing that seams like a problem is the wipers work with the switch off but I removed the fuse and thay did not work but still had resistance. Thanks William


Remove either of the battery cables from the battery and put an ammeter between the cable end and post. start pulling fuses till the draw disappears or gets substantially lower. which ever fuse you pulled serves the circuit that has the problem. I'm ... 1995 Ford Escort

96 plymouth grand voyager. remove and replace alternator. Loosen V belt and alternator and alternator mounting bracket, but cant remove bracket completely.


... 1996 Plymouth Grand Voyager

I have a 92 4runner 2 brand new alternators and 2 brand new batteries were tried to eliminate the problem of the battery never getting a charge from the the alternator so the battery and alternator are not the issue the connection has to be the problem and i removed the fuse housing under the hood and tried to remove the 80 amp fuse but the bastard will not come out there seems to be a clip on the side of it but i cant fuckin figure it out ive only seen one story on the internet of this same iss


GDay mate.. I had the same problem with my hilux.. the trick is to unbolt the fuse box..(two 10mm bolts) turn the box upside down and you will see strait away why you couldnt pull it out.. you will see two spade bits under the fuse.. Remove them and ... Toyota 4Runner
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1746 seconds