Having problems with your 2002 Toyota Camry ?

My 2002 Camry auto window on the Drivers side dosen't work. It will raise then lower half way. Is their an adjustment to be made?

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Look to see if the window rubbers are distorted. If so, you need to replace the rubbers. If not, lubricate the rubbers with pure silicone spray. The up then 1/2 way down is a safety feature, to keep the window from squeezing on someone. The speed of the motor determines the return down, as if you arm was caught in it, the motor would slow down. So, if the rubbers are distorted or dirty, thay slow down the motor proportionally.
Repair Help & Product Troubleshooting for 2002 Toyota Camry

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My 2002 Camry auto window on the Drivers side dosen't work. It will raise then lower half way. Is their an adjustment to be made?


Look to see if the window rubbers are distorted. If so, you need to replace the rubbers. If not, lubricate the rubbers with pure silicone spray. The up then 1/2 way down is a safety feature, to keep the window from squeezing on someone. The speed of ... 2002 Toyota Camry

2003 VW convertible beetle with top down, lowering windows at same time made screeching sound. WHen raised, they all had scratches. Was able to remove scratches by cleaning but now drivers window will not go down all the way. Drivers window still making noise when lowered and will not go down all the way. Lowers only approx half way. other windows seem to be okay now


... 2003 Volkswagen New Beetle Convertible

Adjusting HID headlights with auto level my right headlight is lower then the left.The self level works as when I turn on headlights both tilt and down. Which way do you turn white adjustment screw?


Right to raise ... 2003 Jaguar X-Type

Hello I have a 1996 Jeep Grand Cherokee Laredo 4.0 inline 6. I drove to work just fine and noticed nothing with it then half a mile down the road it died out, the gas gauge was kind of low at the time by the only way it started back up is if I floored the gas pedal and I couldn't let go of the pedal or else the engine would die out, made it to the gas station put gas in and then made it back to my work by holding gas and breaking while drove. It finally started without pushing gas to floor drove


Your timing chain has jumped a tooth or three. Replace the timing chain. ... 1996 Jeep Grand Cherokee

My buttons for my ac and auto are not working or lighting up.. i have the up down buttons for higher and lower flow and i have to push them really hard. is there a way to reset this system to get it


... 2004 Mercury Mountaineer

The wipers have stopped working but the windshield wiper fluid still works. After they stopped working and I had shut the car off for about 5 hours then ran to the auto store for fuses I started the car and the wipers went half way up and stopped again. After arriving at my destination I got out of the car and shut the door (motor was turned off and keys in my pocket) the wipers went back to their normal position. Please help me, no idea why they won't work. 2001 Ford Windstar


Sounds like the wiper motor is bad. Check to see if you are getting power to the motor and if you are that should be the problem. When you turn power off to the motor it is set to go to the normal position so more then likely it just loosened up a li ... Ford Windstar

My rear drivers side seat belt dosn't retract the way it should, it gets all bunched up on one side. It looks the same as the one on the other side of the car and it seems like it's on a bad angle to collect the belt. Half way through and it bindes up and wont allow the belt to come back out. I can force the belt to go all the way in by turning the spool by hand, but that is just a big pain in the ahh hand.. any tricks to solve this. eg. can it be adjusted or turned to allow it work as it should


I'm sorry I do not have a solution as to how you, yourself can fix this problem, however by fooling with it you run the great risk of damaging or jamming it up so that it will be USELESS in an emergency.\015\012\ ... 1999 Subaru Impreza

1999 GMC Sierra 4WD - 5.3V8 Auto The 4 wheel drive is not working - (Auto push button type) I raised the vehicle on jackstands to see if the 4wd would engage. When all 4 wheels are off the ground the 4wd engages and all the wheels spin. But when I lowered the front wheels back to the ground, just the back tires spin and the driveline from the transfer case does not spin. Finally got to the GM dealer for the transfer case fluid - i was surprised, it helped. So 1 problem down - now it engages 4 lo


Replace the front axle actuator ... GMC Sierra 1500

Ford 91 crown victoria car auto transmition small d is not working on high speed.after 60 kmph gear is not engaging other gears are working This happened after I replaced both belt and also there was water and steam leakage from the big hose near the out let and temperature raised to half of the meter I replaced big hose and out let pipe at the engine.kindly help.


... 1994 Ford Crown Victoria

My 1994 Ford Explorer has been having trouble going into gear. I have to give it gas and them it would kick into gear. Once in gear, there was no problem. I stopped on the way to work at an auto mechanic. He checked the fluid and told me it was most likely toast. I got he truck to go again (getting harder and hard to get going) and made it to work. When I went to go to lunch, the car backed up, but was not going into forward gear. The new mechanic says I need a new transmission. I guess I shoul


I would drain trany fluid and filter and put a quaurt of lucas trans slip lube and new fluid in it first and try that ... 1994 Ford Explorer Limited

Hatch back My 2012 mazda 3 hatchback has the auto feature on the driver side door window, when I try to close it using the auto mode it closes tight then immediatly opens half way,no matter what I do it will not stay closed,it works perfectly in the manual mode, can you help me solve this problem. Thank You in advance.Sincerly: Jack Harper


... 2002 Mazda Protege

1999 GMC Sierra 4WD - 5.3V8 Auto The 4 wheel drive is not working - (Auto push button type) I raised the vehicle on jackstands to see if the 4wd would engage. When all 4 wheels are off the ground the 4wd engages and all the wheels spin. But when I lowered the front wheels back to the ground, just the back tires spin and the driveline from the transfer case does not spin. I'm thinking somethings amiss with the transfer case - any insights would be great.


\012Remove the transfer case and check it.internally.\012The procedure to remove the transfer case is as follows:--\012crawl under the truck you will see the bolt pattern facing the front of the truck should be 15mm and they will be in a circle ... 1999 GMC Sierra

I have a 2000 cadillac Seville sts with 136k ?mi on it the dealership said i needed a new waterpump so I went to some local guys theycalled my sister to pick it up cause I had to work she made it half way to get me and it over heated all the way to the ted for only the second time ever i love my car its like driving a cloud I gave them 265 for nothing what should i do to get my car back on the road and my money back


Well, the first thing would be to take it back to the garage and give them a chance to fix it right. If you go somewhere else, your warranty with the first shop is cancelled.If the first shop can't make it right, then you go to shop number t ... Cars & Trucks

We had a flood water on outside of car was up to 3 ft just above the starter and half way up the radiator on 99 pontiac grand am se 4 dr.in the car water was just under the seats up to drivers seat seat adjustment switch that doesnt work now.my concern is the air bag light is on now,sensor must have got wet?does anyone know where these sensors are?or what else could of happened?


Sensors are in bumpers, when the light is on for air bags they are disabled to prevent false deployment. If you have complete ins. coverage the car may be covered. ... Pontiac Grand Am

Hi' I have 91 EB Falcon Auto that vibrates a lot in Drive at idle, less so in Neutral. The Vibration disappears above 20kph or if I raise the revs a bit when idling in Neutral. Otherwise its normal. Is it on the way out or is there something that can be adjusted?


Pcv valve idle air control vavle have fuel system cleaned get a book from a auto parts store it can tell you all the things it might be could be something simple theres two things that vehicles need fuel and fire either one will cause it to act up le ... Ford Fairmont

I have 2002 chevy blazer that just died on the way to work, made no noise cranks but wont start. Bought new batterie, not it tore dwn to timing chain seems fine, new fuel pump an altinator bout yr half ago, has good spark. Tired of guessing an others guessing what could be cant afford to take to garage


If it cranks but does not start, you should be looking for what is missing.Spark to the plugs, fuel pressure ? ? ... Cars & Trucks

Engine failure Yesterday going down the highway at 70mph i lost half of my power and then the engine light came on. Made it to my destination and then back home. Friend from up the street came down hooked up his OBD2 Dianolisis machine(computer). Read that it passed. I turned off the motor it would not start back up. Came out the next morning and the truck started back up took a while to start back up. The engine light was off, and on the way to work the engine light came back on and has same pr


When a catalytic converter is coming apart on the inside, it can restrict air flow and power, and it usually happens or gets worse when the vehicle has been running long enough to generate a lot of heat. Once it cools down, the symptoms can complete ... Cars & Trucks

Trunk latch My 1994 Park Avenue automatic close trunk latch stopped working. I need the lower (pull-down) unit. I can't find a used one anywhere and the new units are too expensive. Is there a way to retrofit the truck lock thereby eliminating the auto close latch?


I own a 92 Buick roadmaster and i had the same problem with mine. i had to disassemble the motor and then turn the gear to lower the hinge. now the trunk closes but i have to have someone help open it now due to no spinge in the trunk lid ... 1994 Buick Park Avenue

1983 F-150 4.9l straight 6cyl. manual clutch Works half way ok when cold , once it warms up little or no clutch - alot of grind. can I mess anything more up trying to adjust it or should I just have a new clutch install- very expensive. please advise


... 1983 Ford F150

I have a 2000 Chevrolet Lumina 3.1 litre engine. The heater isn't working properly, it blows cold air for awhile raising the engine temperature. Once the thermostat kicks in the temp lowers which is great. I know we have to replace the thermostat, the problem is locating where exactly the thermostat is. Aloso, our overflow for the radiator and the tubes for the radiator have a red clayish looking substance in it. Is there any way to clean it out or should I just get a whole new radiator sys


... 2000 Chevrolet Lumina

Steering wheel adjustment lever to raise or lower is broken and the turn signal lever on the steering is not working the turn signal lights wont light up so can these lever be replaced or do I replace whole steering wheel


Yes they can be replaced , what you are looking for is called a combination switch . it maybe faster and as cheap to find a hole steering wheel at a auto salvage yard. keep in mind that then you would have to change key assembly and ether way use ca ... 2000 Pontiac Grand Am GT

Can't find the fuel filter on freelander 04 (gas). Some Internet posts say it is under the rear wheel (that's for diesel?), others say it is accessible via a plate under the rear seat (that's where the fuel pump is). It seems from my mechanic the only way to access/replace the fuel filter is to drop the tank. What idiot engineer made this serviceable part (replace after 5 years), so difficult to get to? Probablty the same guy that designed the mechanics for raising and lowering the windows - I h


I need to change the fuel filter ... 2004 Land Rover FreeLander

The power swich to move the seats to my Honda Pilot forward and backward isn't working.....the power switches for the backrest and to raise or lower the seat do.....my problem is trying to get the hosing unscrewed. The last screw is a the pillar separating the front and rear and I can't get to it...is there a way to manually move the seat forward or backward so I can get at the last screw?


Hello, need to remove the switch and check for power at the switch (12 Volts). \012Being down around the inside carpet, and the switch isn't hermetically seal, \012dirt and grim gets in the switch cause it not to operate properly.If \012there ... 2004 Honda Pilot

I have a 1990 Jaguar XJS v12 with a lack of heat. In either auto or man mode, the upper vents blow only cool/cold air even thought the thermostat is set to 80 or 85. There is warm/hot air coming from the lower vents in the foot wells, but only cold up above even with the air/face slider all the way to the red up arrow, and thoughts. The a/c works fine and cools even freezes one when it is acivated by setting the thermostat to 60 or 65.


YOU COULD HAVE LOW COOLANT OR THERMOSTAT STUCK OPEN POSITION.YOUR HEATER CORE COULD BE PLUGGED.YOU COULD HAVE COOLANT SYSTEM FLUSHED AT THE RADIATOR SHOP OR GARAGE.OR YOU CAN GO TO AUTO ZONE BUY RADIATOR FLUSH KIT TRY FLUSHING IT YOUR SELF. ... 1986 Jaguar XJSC

I have a 2003 Chevy 1500 with the 4.3 engine. My check engine light came on about the same time my driver's side catalytic converter started rattling. I took the truck to Advanced Auto to read the codes, and the codes that came up were P0420 and P0174. Thinking it was the catalytic converter I made an appointment at an exhaust place to replace it, but I continued driving the truck. This morning on the way to work the check engine light started to blink, the truck lost power going up hills an


P is powertrain problems.0174 is a lean mixture,too much air not enough gas.0420 is Catalyst system efficiency below threshold.The lean mixture could cause the catalyst problem easily.I would start looking at the fuel pump and fuel filter.With the cl ... Chevrolet C1500
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.7467 seconds