Having problems with your 2002 Saturn L-Series ?

Remove oil pan

\015 Have crack in the oil pan, need description or diagram of engine and oil pan for proper removal\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Try this, before removing bolts, breaking loose the factory gaskets seals, fighting with cross members and steering joints, some vehicles can never get done correctly unless a professional mechanic with proper tools and educated ways of removing a oil pan. clean it up where the crack is place some paper towel there after draining out all the oil you can, hint-- might need to sit a day with clean paper towel under it making sure its not releasing any more oil out the crack, scrub it with sand paper when its all dry and clean place some "seal all" brand glue over the crack seal all works on oil, grease, gasoline,must be absolutely clean and dry first. after two coats it dries fast then place some paper in third layer to give more stability to the patch. most of the time you will not need to replace the oil pan. if it still leaks get a good book on your vehicle in the public library they give instructions on most all repairs.removal and replacement.
Repair Help & Product Troubleshooting for 2002 Saturn L-Series

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

1999 Ford Taurus GL Wagon 3.0 V6 178K - Two issues. 1 - oil pan - slight leak due to worn oil pan gasket, probably cork. Worn rusted spot on the bottom of the pan. I have a replacement pan from a salvage yard but I'm having a problem getting the oil pan off the car. It seems to be blocked by the exhaust system - how do I remove the old oil pan? Did Ford really do this? Is it really this difficult to remove the oil pan? 2 - The service engine soon light came on. My mechanic checked codes and it c

Drop the exhaust header pipes to remove pan.the bands are starting to slip in the trany :(ford #&^*(*&^$%$^!!!! ... 1999 Ford Taurus

Removed all 10 mm bolts and oil pan will not move do the bolts on the side of the oil pan need to be removed before removing the oil pan

3.1 engine also has bolts in the side that fasten the pan to the main caps ... 1994 Pontiac Grand Am

1996 ford T-bird Lx V6 trying to remove timing chain cover to replace gasket ( oil leak above filter housing. All bolts I can see are removed, does the oil filter housing have to be removed also > and oil pan ?? It appears the cover is stuck Or at oil pan area

Cover has 2-4 bolts at front of oil pan and harmonic balancer will need to be removed to take cover of of crankshaft.. lemmee kno if that solves your problem...chris.. ... 1996 Ford Thunderbird LX

I'm trying to remove my oil pan on a 2000 Silverado 1500 with a 4.3L V6. I've removed all of the bolts, the starter, the transmission cooling lines, the oil level sensor bracket, the front wire bracket, the transmission-to-oil pan bolts, the starter bracket bolts (located on the top, passenger-side of the oil pan), etc. I cant seem to either break the gasket seal or perhaps there are other bolts. Please help

I am not sure, But there could be six more bolts to remove. They will be on the side of the pan, about half way up. three on each side. Sorry for guessing, I work on to many makes and models. Also the gaskets do hold the pan on tight sometimes. If th ... 2000 Chevrolet Silverado 1500

I need to replace the oil pan gasket on my 2000 pontiac montana. i was able to remove 10 bolts from the top of the oil pan, but noticed some larger bolts on the sides of the oil pan (4 total). do those need to be removed as well? Is this a project that someone with little auto repair experience (oil changes, brake replacements, etc) would be able to do?

Yes,remove those bolts as well,the way I always approach a job like that,which I've done hundreds is always better to take off more than not enough,just look around the oil pan and look at the gasket and see how many bolt holes it has,that should ans ... 2000 Pontiac Montana

I am trying to remove the oil pan on my sedona.I removed all the bolts that were holding it and the oil pan came loose. However there is something that prevents it from coming all the way off. I took the small oil pan off but it still the pan would not come off. How am I supposed to get it off?

... 2004 Kia Sedona

I hit a rock with my 07 HHR, it put a gash in the oil pan. I am trying to remove the oil pan but it won't budge. I have taken all of the bolts out and it still won't budge. How do I remove the oil pan?

Thanks for using FixYa!\015\012WITH ALL THE BOLTS REMOVED:\015\012Use a Rubber Mallet and gently tap the bottom of the Pan, going in multiple directions; breaking the Gasket Seal. Use one hand to support the Pan, so when the Seal breaks ... 2007 Chevrolet HHR Special Edition

Removed oil pan bolts and it seems the trans axle housing is keeping the oil pan from coming off in the rear, do I need to unbolt the trans axle from the block to remove oil pan?

To get the oilpan off a 1994 Accord, you'll need to unbolt the downpipe from the header, unbolt the brace holding the downpipe to the block, and remove the exhaust hangers from near the PS rack. This will allow you do drop the downpipe out of the wa ... 1994 Honda Accord

I have a leak in the body of the oil pan on my 2004 chevy suburban 2 wheel drive. It is a hairline crack. Do I have to remove the entire engine to install a new oil pan? Can the frame cross member be removed to allow room to swap? Is there anything that can be done to repair the leak in the existing oil pan such as epoxy or aluminum welding?


Would you happen to have a photo of the motor with the oil pan removed to see the position of the oil pump? I know that there's a bar that can't be removed underneath the car that crosses part of the oil pan, and I just want to make sure I can access the oil pump this way. I was actually thinking of lifting the motor out to access.

Location of Oil Pump : Its inside the oil pan need to lift engine to get in there due to the chassis bridge.How to replace oil pump : Take the motor out, remove the oil pan, then\015\012change it. Before you change it though ... 1990 Dodge Dakota

How do you remove the oil pan from a buick rendevous 2002. Have all bolts removed but oil pan is still up. How do you remove so you could take old gasket off and put new one on.

It's not uncommon for the oil pan to get stuck. This usually happens if the gasket was not put on correctly and gunk gummed up the seal, essentially gluing it in place. Use a small nylon, wood or leather covered hammer and tap around edg ... 2002 Buick Rendezvous

I have a 1997 Plymouth Voyager with a 3.0L engine. I am trying to replace the oil pan gasket. The literature says I need to remove the front motor mount bracket, bending braces and torque converter dust shield in order to remove the oil pan. It seems the brackets and braces use a strangely sized socket. I am also worried about having the engine fall on me when these brackets and braces are removed. What size of sockets do I need to use and where can I find them? Do I need to support the en

... 1997 Plymouth Voyager

I have a 1996 chrysler cirrus 2.4 liter dohc 4 cylinder engine that needs the oil pan replaced. i have removed all things but the lower engine support because even after all bolts were removed the mount will not. the mount is the only thing left in my way of the oil pan removal

You need to hold the engine on a trolley jack by lifting it on the oil pan itself to then undo the engine mount. Once the mount is removed lower the jack, remove the remaining pan bolts and then remove the pan proper. Refitting is a matter of fittin ... Chrysler Cirrus

I need to remove the oil pan from my 2002 chevy express van with the 4.3 liter motorI have removed the stater and the trans line and the pan bolts. the oil pan should be free but it appears to have dowl pins in the trans housing?

Try pulling the bell housing off the tranny i think theres two bolts back there ... 2002 Chevrolet Express

Oil not circulating ? 1999 Nissan Altima DOHC, KA24DE, 200315 miles The right side guide rail to the lower timing chain shattered and jammed the oil pump. I have replaced the oil pump and both timing chain guides. I have removed and cleaned the steel oil pan, the aluminum oil pan (beside the transmission), the valve cover/cams and chains. I have cleaned the drain holes on the driver side of the valves. Also the pickup in the pan, and the everything on the front of the motor. I've changed the oil

Well, from the oil pump it goes into your oil filter so the lines going from the pump into the filter could be clogged. check that and see. Also on most imports I have found that they have to be primed after the oil pump has been replaced. Buy a oil ... 1999 Nissan Altima

I have an oil leak and believe that when a shop replaced my oil pan gasket the pan bolts were over tightened thereby damaging the rim of the oil pan. What is the procedure for removing the oil pan?

Drain the oil, take out all of the bolts..... Wear old clothes, it's messy! ... Chevrolet 1500

Honda s2000, 2001 loose of power , I get to around 6000 rpm it sputters continues to 9000 rpm.No Engine light or codes. Vtec is working . I removed the solenoid and cleaned, replaced the gasket and screen everything good Changed the oil and filter . No vacuum leaks, all new hose Good oil pressure 85psi Good fuel pressure 55psi Replaced coolent sensor Removed oil pan see if there's any problems, cleaned oil pump filter screen. checked olms on vtec solenoid , good Did the map sensor whack , remove

The only thing i can think of is the injectors, you will have to check the olms on them while under load. one thing i have learned working in an automotive repair shop is you need it to be failing to find the problem, your problem is you probly need ... 2001 Honda S2000

In a 1994 landcruiser; i can't seem to get the number 2 oil pan out, it gets caught on the crank and some of the underbody; is there a way to remove. I am doing a timing chain and is following procedures, but I cannot seem to find intructions on removing oil pan.

... 1994 Toyota Land Cruiser

Remove oil pan to replace oil pumpOil Pan removal

... 1989 Ford Ranger

How to remove the oil pan on 2004 Honda Pilot 3.5 liters. Does the subframe need to be remove to replace the engine oil pan?

... Honda Pilot

How to remove oil pan on a 1997 pontaic grand am 3.1 liter cant remove oil pan

... 1997 Pontiac Grand Am

Trying to remove the oil pan of 2006 Civic EX to weld a hole caused by debris. All bolts out except near oil filter/AC compressor mount. Now I'm stuck, can't figure out how to remove those and get to last couple of pan bolts.Assuming I need to get tension off of serpentine and maybe loosen AC compressor...but stumped at the moment. Boy would I love a diagram or two!

It is shown on a decal under the hood. If your decal is gone here is the link for the routing.\015\012http://www.gates.com/common/part_ ... 2006 Honda Civic Hybrid

1994 Toyota Corolla oil pan removal. Center brace in the way.How to remove center brace to get to oil pan?

Remove engine mountings and lift engine. ... 1994 Toyota Corolla

Oil pan removal on 1993 Chevy Lumina Car. 3.1L. I already have the front motor mount and trans mount out of car as well as the timing chain cover front yolk. Oh and the two dog bone mounts also. Can't seem to raise engine high enough to get clearance enough to remove oil pan. What next?

Took the car out into my back field and smoked it.It was getting to be such a head ache and I couldn't take it anymore so I lit it on fire and watched it burn to the ground.Thanx.Me ... 1993 Chevrolet Lumina

OIL PAN we can't figure out how to remove the oil pan. We can't reach a few of the bolts.....is there a special tool that I need to remove the bolts that I can't seem to get too? If not any suggestions? Thanks

You may need to use smaller-drive sockets (like a 1/4" with a swivel) to reach the tough ones. Sometimes they're obstructed by parts that can be removed as well - you should look to see if anything that is blocking bolt access is removable or adjust ... 2003 Suzuki Aerio
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2463 seconds