Having problems with your 2002 Lexus ES 300 ?

How to Replace Wiper Switch on '02 Lexus ES300?

\015 On my 2002 Lexus ES300, the Intermittent Wiper mode is inoperable. (Continuous low/high operation is working.) All the fuses are OK. I believe the switch itself is bad: where is the switch located and how do I replace it?\015 Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 2002 Lexus ES 300

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to Replace Wiper Switch on '02 Lexus ES300?


... 2002 Lexus ES 300

I have a 95 Lexus ES300 and the fuse for the windshield wipers continuously blows as soon as I start the car. I've replaced the motor already but did nothing to help. Also, not sure if this is related, the brake switch goes out also. I have replaced it once a year or 2 ago and I have to replace it again. Any ideas???


... 1995 Lexus ES 300

I have a 1992 Lexus es300. The poles were switch on a battery replacement. I had to replace my alternator fuse and others, but my efi 15 amp fuse keeps blowing as well as my 20 amp dome light. What do I need to do? Do I need to reset the switch under the dashboard? If so were and how to get to it?


... Cars & Trucks

Wiper switch replacement on 1996 lexus ls400


... Cars & Trucks

How to replace master window switch on 95 lexus es300. Do I have to remove door or just switch covers.


... 1995 Lexus ES 300

Lexus ES300 2003 - passenger door switch not working - shows door closed even if it is open. How do I replace the switch or do I need to take it to a repair shop? Approximate cost?


Try this website to download a free manual\012\012\012\012http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717 ... 2003 Lexus ES 300

How to replace master window switch on 95 lexus es300. Do I have to remove door or just switch covers.


... 1995 Lexus ES 300

2005 Chevy Colorado Wipers not working properly.New wiper motor replaced 1-month ago.Wiper switch replaced yesterday. With the switch in the off position turn the ignition key on the wipers come on for 3-seconds then go off. wipers do not return to the park position.In the low postion the wipers come on for 3-seconds then go off. In the hi position the wipers come on and stay on but do not return to the park position when turning the wiper switch off.I can monitor the command from the switch and


... Chevrolet Colorado

I need to replace the driver seat heater switch in my 2001 Lexus ES300. Do I need to take the center console out?


No. All you need to do is gently lift the switch by the corner and lift.The wires will then be exposed for removal.Installation is the reverse with a gentle tap on top of the switch to secure it in place.JDL ... 2001 Lexus ES 300

How to replace windshield wiper carriage on 98 lexus es300


... 1998 Lexus ES 300

Wiper switch replacement on 1996 lexus ls400 - Cars & Trucks


... Cars & Trucks

1997 lexus es300 over heats all of the sudden when not moving. already replaced fan relay switch.


Reference to Lexus getting hot after engin run for a short time: Replace the sensor behind the engin radiator cap on engin. ... 1993 Lexus Es 300

The windshield wiper on my 1993 ford escort GT became intermittent and now barely works. I have to switch it off and on many times before it starts working. Is it controlled by the computer (I've noticed that only 2 small wires come from the wiper switch cluster. I've heard that it is difficult and expensive to have the wiper switch assy. replaced. Is it possible to make a bypass switch to operate the wiper motor directly? Or is it possible to spray contact cleaner into the switch?


The motor itself may be failing. disconnect the harness from the motor and run a voltage test at the terminal. if you get a consistant 12v at the terminal after turning the switch on and off several times then the motor is failing. ... 1993 Ford Escort 4 Door

'94 Chrysler Concorde wiper only works on high setting. No activity at all whether in the "delay" section of the switch and also on low setting. It is modulated by the wiper motor or is there a wiper control module somewhere that I have to replace. I haven't looked around for the module yet. I was going to replace the switch but I was thinking it may be the motor itself. All help is greatly appreciated. Cheers


Check the multi function switch ... 1994 Chrysler Concorde

I have a 2004 ES330 Lexus and the alarm is always going off. I brought it to the Lexus dealer and they told me the problem is one of two (2) things: Hood Switch or rear door actuators. I had the Hood switch replaced at the dealership and had the rear door actuators replaced at the dealership in which I purchased the car from. The alarm stop going off for about two days and it was back to the same thing. I went back to the Lexus dealer and now they are telling me that I need to pay an additional


... Cars & Trucks

I have a 2004 ES330 Lexus and the alarm is always going off. I brought it to the Lexus dealer and they told me the problem is one of two (2) things: Hood Switch or rear door actuators. I had the Hood switch replaced at the dealership and had the rear door actuators replaced at the dealership in which I purchased the car from. The alarm stop going off for about two days and it was back to the same thing. I went back to the Lexus dealer and now they are telling me that I need to pay an additional


... Cars & Trucks

I need to know how to replace my turn signal switch on my steering wheel my windshield washer turner broke off so either I need to know how to fix the windshield washer switch or just replace the whole turn signal switch? I can use my windshield wipers I just have to hold the part that feel off I don't know if it had some spring to keep in place but I can't leave it on there and turn the dial to make my wipers go faster or slower. Hope I was detailed enough so you know what I am asking.


The turn signal switch or in Ford terms "multi-function" switch is easy to replace if you are mechanically inclined. Lower the steering column "tilt" adjustment for easier access. Remove the lower panel (below the steering column). Remove the three s ... 1996 Ford Crown Victoria

I have a 1999 explorer sport that the rear wiper does not work. I have already replaced the wiper assembly,checked the fuse under the hood, switched the wiper relay with another known to be good and tested the wiper switch all are good. I have also checked the rear window switch with an ohm meter. I do not have a wire diagram to test wires so does anyone have a diagram or answer to solve this problem.


... 1999 Ford Explorer

I have no wipers..replaced wiper switch--replaced wiper motor--replaced wiper relays (2) fuses are good.


Sounds like your problem may have been the BCM from the start. (Body Control Module) . It's to the left of the brake pedal under dash, behind the junction block, near end of carpet. If you can get connector(s) off and spray connections with electrica ... 1999 Dodge Caravan

2004 Holden Astra, I've just replaced the wiper switch, the wipers are working fine, it's the windscreen washer I've the problem with, when I pull the switch towards me I can hear the motor going and the wipers go on for 3 strikes but no water sprays out onto the windscreen, but when I push the switch forwards the washer


... Cars & Trucks

When I turn my wipers off instead of them staying in down position they stay staight up. I replaced the wiper motor and the wiper switch located on the steering wheel, but I still have the same problem with the blades going down when switch off.so is it possible to have a relay switch causing the problem?


It is either the relay or the arms that are causing this problem. You will need to take the faring off and see what it looks like under there ... Pontiac Grand Prix

My wipers only operate in the fast mode. Any other position I put the wiper switch in, after I had them in fast speed, they just stop in the spot they were at when the switch was moved. The wiper motor was replaced about 3 yr. ago. Would it be the motor again or the switch control on the steering column? Any ideas would be greatly appreciated. thanks. T.W.


Check for your warranty on the old wiper motor...this can only be caused by the motor and transmission (included with motor:) Hope this helps...:) The smart stick that is on your steering column rarely fails... ... 1997 Chevrolet K1500

I have a 98 Ford Taurus SE with windshield wipers that will not turn off once started unless you turn the ignition off. The wiper switch (stalk on column has been replaced. Relay has been replaced. Wiper motor has been replaced. What could be the cause (timer?) (another relay?) Thanks for your time bullnuke


... 1998 Ford Taurus

ZD1631 WHAT IS CAUSING MY ZD1631 WIPER MOTOR TO MALFUNCTION? THE WIPER MOTOR IN MY TIFFIN ALLEGRO BAY MOTORHOME WORKS FOR A PERIOD OF TIME IN LOW SPEED THEN STOPS. IF I TURN THE WIPER SWITCH OFF THEN BACK TO HIGH SPEED WIPERS WILL COME BACK ON. I CAN THEN SWITCH TO LOW SPEED AND THEY WILL RUN FOR A SHORT PEROID OF TIME. THEY ALSO FAIL IN HIGH SPEED BUT WILL NOT RESTART IMMEDIATELY. I HAVE REPLACED THE WORKHORSE WIPER CONTROL MODULE WITH A NEW UNIT BUT THIS DID NOT RESOLVE THE PROBLEM.


... Cars & Trucks

1992 Mercury Sable - Windshield wipers will not operate. Where is the wiper control module, what does it look like, and how do I access it? If possible, please detail components requiring removal to allow access, and order of removal. Additional info: (1) Washer works fine. (2) Replaced wiper switch (wiper / turn signal / high beam wand). (3)Replaced wiper motor.


... 1992 Mercury Sable
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.4696 seconds