Having problems with your 2002 Ford F250 Super Duty SuperCab ?

No trailer brake lights or turn signals on a 2002 ford f 250

\015 Running lights work but no brake/turn signal at seven pin all fuses seem ok\015 Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 2002 Ford F250 Super Duty SuperCab

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Trailer Connections I have to mount a European Trailer Receptacle to my existing American Trailer Recptacle on. The turn signal/blinker and brake lights are 3 seperate wire circuits for all european trailers. How do I seperate the circuits so the brake lights and turn signals don't come on at the same time? Here is how the 7 Pin European receptacle needs to be wired. 1. L/H Turn 2. Fog 3. Ground 4. R/H Turn 5. R/H Tail 6. Brake (L/H & R/H Sides) 7. L/H Tail Use this diagram for wiring camping tr

I took the vehicle to Bosch, an electrical expert in Germany. ... 1997 Ford F150 Regular Cab

I have a 1997 Ford F150 4x4 Supercab Stepside with 5.4L and factory towing package. On the factory trailer wiring plug I am not getting power for turn signals or brake lights. Running lights and brake controller work fine. I have checked fuses, and one was blown, which I replaced to get running lights working. But I still do not have brake or turn signals at the plug. Is there something else I can check before tracing the lines?

No, check the wiring in the rear going to hitch plug, they may have rotted or broke,if lights work on the truck then i would say its wiring,test wiring moving backward until you get power, this way you can pinpoint break location area, good luck, ho ... 1997 Ford F150 Regular Cab

I have a Ford F250 with the trailer towing package. There is running light output at the rear plug but no brake light or turn signal output. The brake lights and turn signals work fine on the truck. I

... Ford F250

I have a Ford F250 with the trailer towing package. There is running light output at the rear plug but no brake light or turn signal output. The brake lights and turn signals work fine on the truck. I replaced the 4 pin/ 7 pin wiring harness due to a broken wire.

... 2003 Ford F250

1998 Ford Explorer has factory trailer wiring ... won't light the left turn signal light on trailer or left brake light ... bulbs are good, all lights work when vehicle lights are on except the left turn on rear of trailer

Use this as a guide and a 12 volt test light, or multimeter to see if power at proper terminal from truck. If power there, then connection at trailer plug, or wiring from there to tail lights on trailer is faulty. ... 1998 Ford Explorer

All lights work and brake light at top works. brake lights on bottom left and right don't work. It was hook up to trailer wires connection. going down the road and when you turn on the right turn signal the cruise control would go off. the brake lights would come on but the right turn signal would stop working. as soon as you let off the brakes the turn signal would work again. I took the trailer connections off and replaced brake fuse and they still don't work.

Check a few things...\015\012- The bulbs\015\012- Check for ground at brake lamp connectors\015\012- Check your wiring at the connectors for power\015\012- Check for another fuse blown \015\012- Do not hook up the traile ... 2000 GMC Safari

Here it is; I have a 1990 Nissan Kingcab. I took the bed off,now my lights don't work. More detail: when I first put my flatbed on, I hooked the harneses back up and had 1 bright brake light and one very dim one, no running or reverse lights but both my turn signals worked. I removed the wiring someone had spliced in for a trailer hookup as I don't need it and now only my turn signals work, nothing else. Please help me if you can...Thank you!!

Make sure you have good ground connections. ... 1990 Nissan Hardbody King Cab

I actually have three issues electrically with my 2005 Envoy XUV. The most important one is the running lights. First the running light feed to the trailer connection ( factory installed ) fed no power to the trailer, I also found the fuses for the trailer turn signals both left and right were blown. I replaced them and the trailer turn signal and brake lights are ok but still no running light power from the Envoy. About a month after this the right rear running lights in rear turn signal brake

1) Look for fuse 32 in underhood fuse panel, I believe this is for trailer lights. 50 & 51 are for R and L trailer brake.2) The blower resistor pack is defective, this is located behind the glovebox and mounted to the blower body.3) I ... 2005 GMC Envoy

2004 ford f150 no tail ights ,no left turn signal or brake light,also cruise control has quit at the same time,also has trailer tow wiring.have cleaned all connectors and checked fuses,they are all ok . 2004 F150 ALL LITES WORK, EXCEPT NOW I HAVE TRAILER ON AND NO TAIL LITES OR LEFT TURN SIGNAL ON TRILER ONLY.. I HAVE CHANGED OUT EVERY PLUG AND AND POSSIBLE, DONT HAVE OWNERS MANUAL SO DONT KNOW WHICH FUSE TO CK.PLEASE HELP FAST I CAN ONLY DRIVE IN DAY LITE

Check with http://www.etrailer.com/faq-wiring.aspx. They may have the fuse location. I know some are behind the passengers kick panel. Hope this helps. Mike ... 2004 Ford F150

Lighting problem 2004 ford f 450 4 wheel dr., deisel,the dash lights quit working and the tail lights on the trailer. but the tail lights on the truck work. also the turn signals and brake lights on the trailer work.

Have you checked the fuses and dimmer switch? Check the trailers bulbs there is usually one bulb with two filaments for each light, one filament can burn out without causing the other to go. If the bulbs are good you should start at the trailer light ... 2003 Ford F350 Super Duty DRW SuperCab

Hi. I have a 2002 Ford Windstar. The ABS and Emergency brake lights come on often and stay on. I had the brakes checked and they are fine. It had some quirks, like the radio turning on or off by itself, tail lights staying on after the van is turned off. I replaced the battery since it checked bad and now it is worse. I have no dome lights, no brake lights, no left turn signals only a right front turn signal, the radio still turns on and off on it's own, only the right puddle lamp turns on. I h

Get a good manual with the schematics in it for starters is you are going to try to DIY. The rear light problems are from a common defective part call a REM Rear Electronics Module. Located in the right rear corner behind the jack access panel. The f ... 2002 Ford Windstar Cargo

I have a 2008 Dodge Ram that came with the tow package. When I plug in my 7-pin trailer (with electric brakes) everything works fine until I turn on the truck lights. When I turn on the truck lights, I loose both of my turn signals and brake lights on the trailer. The running lights stay on. I unplugged the brake controller and still have the same problem. I compared my trailer plug diagram to my trucks manual and everything appears to be wired correctly.

If you have amber signal lights & red brake lights, it's 2 separate circuits. You'll need to buy a small converter that you wire into harness to correct that. Not expensive, try autoparts store or RV/trailer sales, should have them. ... 2008 Ford F-350

When I hook up my trailer to my 1996 4Runner both turn signal lights come on at the same time. When we unplug the trailer and connect two lights directly to the factory trailer wires on the rear of 4Runner both turn signals come on so it is not the trailer. The brake and lights work fine, it is just the both turn signals come on. Thanks

Our 95 4runner had similar issues and it turned out to be the electronic aftermarket wiring adapter. I unplugged the connections from the factory connections that went to the trailer wiring box and problem solved. Replaced that box with a new one and ... 1996 Toyota 4Runner

I have a 2008 Ford F 150 with factory installed trailer wiring. I bought a trailer plug tester. It shows the tail light function to be dead. Brake lights, turn signals all work. Any ideas?

The trailer tow adapter parking lamps is fuse #10 in the cab fuse panel. There is also a trailer tow parking lamp relay that powers them, which could have a problem as well.Start with the fuse, and maybe check both the 7 pin and the 4 pin for ... 2008 Ford F 150 2WD

Trailer wiring We installed a trailer wiring kit on our 2004 Ford Escape. The lights will work - but there are no turning signals or brake light. What is the problem? Thanks.

You have to purchase a converter box with 5 wires, red, yellow, green and brown. this is because your turn signal is seperate from you parking and brake light bulb. you have to wire it straight in behind the connector.your basically converting two wi ... 2004 Ford Escape

I have a '05 Ford Ranger. I bought a camper shell that has a Third Brake Light and I would like to hook it up so it works when I apply the brakes. Hooking the camper shell 3rd Brake lights to the p/u brake lights won't work as the p/u does not have separate turn signals. So if I turn the signals on, the camper shell 3rd brake light will blink. There has to be a way! thanks!

There will be four wires going to your lights you will have to test each wire to see which wire is for the brake light and tap into that wire. on all ford rangers one bulb controls everything so you can't just hook it up thru your bulb so you will ha ... 2005 Ford Ranger

2001 Toyota Tocama 1) Right turn signal comes on when I brake, it does not flash it just comes on. 2) If I have it turned on, it will not flash whilel the brake pedal is pressed. 3) When I turn on left turn signal, both front signal lights light up and the left turn signal still blinks. 4) This is an intemittent problem, I've replaced all the bulbs but it continues to happen. How can I locate the problems?

If you have an aftermarket trailer towing plug, that's the first place to look. There is probably a short in the wires, and when you push the brake, the signal light comes on. If not, then it will be a bare wire somewhere, probably at the back where ... 2001 Toyota Tacoma

The fuse on my Hyundai Sante Fe trailer wiring system burns out whenever I turn on the running lights. The signal and brake lights do not burn out the fuse however. The running lights work fine on my Ford Escape. any ideas?

... 2009 Hyundai Sante Fe

Wiring problem for 2005 Pathfinder trailer hitch harness. Brake lights work on left side, no running light or turn signal. Right side turn signal and brake lights work. Replaced harness, but result is the same. Tested trailer wiring with another vehicle, all systems fuction. Should I by-pass the harness and wire tow vehicle side thru taillights.

Sounds like the converter is bad. Go to http://www.etrailer.com/faq-wiring.aspx and check the testing section. Hope this helps. ... 2005 Nissan Pathfinder

All lights work correct on trailer until I turn on running lights, at that time when I apply brakes the trailer lights go out, and brake lights do not work but turn signals will still work. If I turn running lights off every thing works fine.

I've had this problem before. What I found was a bulb socket which was wired for two filaments and a single filament bulb was plugged in the socket. A single element bulb will set between the two filament socket and effectively short the two. ... Chrysler Town & Country

1995 Ford Mustang convertible, turn signals do not work, no turn signal light even appears on the instrument panel (often you will see the arrow solid, not blinking, no arrow period) other tail and brake lights work,... except for when I turn on the turn indicator, then the corresponding brake light goes out as well. We do not have an owners manual.

Hi. You may check the fuse first. Might be fuse are blown out thats is why signal light is not working. ... 1995 Ford Mustang

1995 Ford F350 having issues with marker lights and left turn when hooked to tow a trailer. Everything works on the truck when NOT pluged into the trailer, but when connection is made the only lights that work are the right turn, brake and trailer brake lights. The truck has a factory tow hitch and ALL lights worked just fine 2 days ago.

Check wiring on trailer ... 1993 Ford F350

No lights while working on my trailer lights to make sure they were working I lost my brake lights, turn signals and hazard lights. Head lights work and tail lights work when head lights are on, other than that I have nothing. I checked the fuses to turn signals and trailer lights and all were ok.

Some where you lost the ground for the lights take your time and check things over again and you will find it ... 1998 Ford F150 Regular Cab

I have a four part problem that started by some one wiring my trailer pig tale wrong it was the only thing done minutes before the first problem started #1 gear stick wont come out of park un less you manipulate the ignition just right. #2 Emergency flashers stopped working.have turn signals and running lights and brakelights.#3 going down the road the gas gauge went to full by its self and stayed there. #4 brake lights on both sides just stopped working today. My questions are, are they all rel

It is all related and the connections should be undone immediately. I am worried about you having an electric signal going into your gas tank which the fuel gauge gets its readings from. The signals are suppose to work on grounding and low resisten ... Ford E-350


Did you guys ever solve the issue with your trailer wiring? I have a 2000 Expedition with only one brake light on three different trailers no other lights work. They were working fine and the work fine on other vehicles. I know it could be anythin ... 1998 Ford Expedition
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.1549 seconds