Having problems with your 2002 Dodge Intrepid ?
Can i put a 3.5L in a 2.7 spot with out extra work or part to change over
Repair Help & Product Troubleshooting for 2002 Dodge Intrepid
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Can i put a 3.5L in a 2.7 spot with out extra work or part to change over
... 2002 Dodge Intrepid
Changed the battery on the wireless key and does not work. Put another new battery in still does not work. The red light comes on and inside no loose parts. Can it be reset? My backup wireless key works fine. Subaru forester 2003 thanks Bill
... 2003 Subaru Forester
I had my oil changed today and the mechanic that did the work said that the engine seemed to be moving more than normal when the vehicle was put in reverse and drive. He indicated that the passenger side engine mount may need replaced. They quoted a price of $160 parts and labor where as the toyota dealer quoted me a price of over $2000. What I'm wondering is if the mechanic is giving the wrong name for the part. The part is attached to the passenger side of the engine. It has a metal bar
That's not an engine mount\015\012Sounds like an upper engine brace. Here's a pic of one for reference. Yours look a little like it?\015\0122K for changing engine mounts?? holy $#*^. Stay away from the stealer. uh, I mean dealer. . . .no, ... 2008 Toyota Highlander
When driving on the roadway, the car will just quit. The automatic doorlocks will click and the engine will shut down. I pull over put it in park, then start it again and go. This happens intermittently at no certain time, weather or driving pattern. I drive to work 25 miles one way. Sometimes I can drive to work without it shutting down and sometimes it will shut down once and maybe twice. Here are the parts that have been replaced recently: fuel pump, fuel filter, changed all 3 coils, f
2000-2002 Grand ams are notorious for having the most faulty passlock systems ever installed. You are experiencing a passlock failure. When the cars stalls on you, check to see if the "security" light illuminates on the dash board some where. That wo ... Pontiac Grand Am
Why is there no power going to my fuel pump? I've changed the relay, fuses, down to the PCM and still have nothing. I jump from #30 to #87 at the fuel relay spot in the underhood fuse panel and can hear the pump working. But not when I put the relay back in and turn on the key. '02 Chev. Silverado 4.3 V6. Truck just doesn't start. I've tested all circuitry related to fuel, changed the relay, ECM b fuse etc. nothing helped.
May be the fuel pump is the problem it may need to be replaced....hope this helps.....cheers ... 2002 Chevrolet Silverado 1500
I have a 1998 Isuzu Hombre that quit running. Runs using the starting fluid test then quits when stop spraying. Changed Fuel Pump. Ran for about a week then quit. Have power to the pump, cleaned ground wire. Plugged in old pump and it worked. Put old pump back in started ran for about 2 minutes then quit and pump won't run. Next day pump ran started truck ran for a couple of minutes then quit, pump won't run. Plugged in the extra pump and ran. Put pump back in started, ran for a few min
Hello! I'm basing the following solution on the 2.2L...If your vehicle has the 4.3L engine let me know...The Manifold Absolute Pressure sensor (MAP) more then likely is defective...It can be tested...It is bolted to the throttle body...Has a three wi ... Isuzu Hombre
1996 chevy pickup ac not working right, builds up too much pressure (75 pounds) before you have time to put in 1 can of 134a gas. I have changed out every ac part that I could find on the truck and still no success! What else can I do? I'm desperate after 3 days of working on it!
Change the orifice tube at the firewall, if you haven't done that already.\015\012 ... 1998 Ford Explorer
Wondering what else we need to try: Our truck runs very rough-cuts out and cannot go very fast (maybe 25- tops). We have had a few different people work on it and they have put on new parts. We have put on a new pick-up assembly, new spark plugs & wires (whole tune-up kit), replaced gas lines, changed oil, and most recently replaced coil and wiring to the coil. They also checked the timing, and compression, and adjusted dist. pickup syn. sensor. We have also tried "Heet" in the gas tank. A
Check the catalytic converter on the exhaust. They are bad about getting clogged up on a dodge. If they clog it will make your engine run poorly and have no power due to little or no exhaust flow. Its a pretty common problem. ... 1993 Dodge Dakota
Ac on 1996 chevy pickup won't work, builds up 75 lbs pressure before 1 can of gas can be put into ac compressor. changed every part that i knew about and still not working! What else is there to do?
Hi\015\012\015\012Please check the bellow links to have an in-depth knowledge to your query and to diagnose the problem to your car Airconditioner….…\015\012\015\012 ... Chevrolet 1500
I BOUGHT A 2005 DODGE MAGNUM WITH BLOWN MOTOR, AFTER DOING THE SWAP THE CAR WORKS GOOD EXCEPT THE TRANNY DONT SHIFT OUT OF 1ST GEAR, NOT EVEN ON HI RPMs. I THOUGHT IT WAS A TRANSMISSION PROBLEM SO I ALSO SWAP THE TRANNY FOR A GOOD WORKING ONE FROM A RUN & DRIVE DODE CHARGER, BUT I STILL HAD THE SAME PROBLEM SO I PUT BACK THE ORIGINAL TRANNY. I DONT KNOW WHAT TO DO WITH IT.OH AND I DONT HAVE ANY CODE.I ALSO TRY TO CHANGE THE ABS COMP. FROM A JUNKER AFTER CHECKING THE PART # WITH THE DEALER. BUT D
I would check the input and output speed sensors. However the new transmission should have fixed the problem unless you kept the speed sensors. Here is a manual that shows where they are. ... Dodge Magnum
I had to change my power brake booster on my 95 chevy 4x4 c 1500. When i put the brake light switch back on it doesnt come on when i push the peddle. when i take it off and push the button manualy it works. Am i putting it on right? Did i loose a part when i took it off?
IM SORRY BUT I DON;T UNDERSTAND WHAT YOU ARE TRYING TO SAY YOU DID THE VACUUM BOSTER CONTROL UNIT WHAT SWITCH DOSEN;T WORK AND WHAT LIGHT ARE YOU TALKING ABOUT ... 1995 Chevrolet K1500
95 Chevy Cavalier with the 2.2 engine in it. The Speedometer does not work and the Odometer doesn't work either But the Auto meter does work. Me and My father thought by changing the vehicle speed sensor that the problem would fix itself. So after changing the sensor the problem still occurs. My next step would be to change the sensors harness. If that does not fix the problem what do you suggest i look into next? I'm a DIY type of mechanic and I work at Napa Auto Parts so all of the parts i nee
More then likely its the speedometer cluster itself thats bad. ... Chevrolet Cavalier
CHANGED THE FUSES FOR THE CIGARETTE LIGHTER. ON THE SIDE OF THE DASH AND UNDER THE HOOD. PUT MY CHARGER IN THERE AND ALL OF THEM DO NOT WORK? WHAT DOES THAT MEAN? ALSO IN THE MIDDLE PART BY THE RADIO WHERE IS SHOWS THE TIME IS GOING OUT, CAN A FUSE FIX THIS?
My radio works fine but my lighter does not. Wat fuse should I change? ... 2004 Mitsubishi Endeavor
I just changed my 2000 honda crv tail/brake light bulb. Now brake light works, but not tail light. I put on bulb grease as recommended by part store. What might go wrong? How do I fix it?
... Cars & Trucks
Hello, I have a 2000 Mitsubishi Eclipse GT V6 3.0 that the service engine light soon has come on. A mechanic put his diagonistics machine on it and the error code P0135 - Heater circuit, bank 1 sensor 1. I got a new O2 sensor from a friend that works at Mitsubishi that used my VIN to ensure correct part. I changed the O2 sensor on the top of my exhaust manifold. There is also a lower one and one near the firewall more on the left side pf the engine as you stand in front of the car. For the code,
... Mitsubishi Eclipse
Im having a P0700 On my Ob2 scanner on my 2002 dodge intrepid se 2.7 liter Vin "R" 167 ... anyway thats my motor specs i went to the dodge dealer and they estimated 1300 dollars to change the Silinoid pack parts n labor im sure i can do this myself as ive worked on many cars trucks u name it but the transmission is a grey area of mine now understanding the transmission i have a Input and Out put speed sencer should the p0700 point more tord the High output speed sencer or the input or could th
To fix the problem you need to drop the pan on the bottom of the transmission. From there you need an experienced person to look things over and perform a few tests. p0700, have a good day !! may be a good transmission shop is cheaper then the dea ... Dodge Intrepid
2002 pontiac gran prix will start for about 5 seconds and security light flashes and car shuts off . I had a different problem last week, it just seemed to start when it wanted to and would be good for days. Then it would not start and when you came back awhile later it would go again and work well all day. Mechanics changed fuel pump,and a module under the distributor. Then today this security light thing and the car cutting out. Any way to reset it or bypass it. Getting tired of putting parts
Usually if there is a security problem on the car , it has to do with the ignition cylinder being that is where the passlock is located . the module has to see a certain resistance when the key is turned to varify that the key is being used rather th ... 2000 Pontiac Grand Prix
My oil light came on while coming home from work. It flickers on and off in rough spots on the road but stayed solid for the most part. Levels were good but had oil changed anyway. Light is still on. No strange sounds from the engine, yet. What is your best guess?
Hello there.A light that flickers on bumps and no engine noises would suggest a loose electrical connection.To begin I would probably get the oil pressure checked out to verify it is OK. A manual gauge threaded into the hole where the oil ... 2003 Dodge Durango
I went to put my gear shifter in reverse and the lever went straight up to park. The digital part says it is neutral but the shifter is in park. It is in nuetral as we can roll the car. on top of column is a plastic piece if I pust it the shifter changes gears and works fine, what makes this plastic piece move?
... 2001 Mazda Tribute
1998 Jetta TDI that needs rear suspension system bushings. The dealesr gave me a quote on replacing these but added that there may be an extra $500 charge if a brake part needs to be changed while working on the bushings? I am a farm boy mechanic and I am having a bit of trouble making the connection between suspension system and braking system. Do you have any suggestions for me?
The dealer is speaking of the ABS reluctor ring.The ABS sensor uses it to determine the wheel speed.There is a possibility the ring is already cracked and disassembling the axle will break it altogether.There is no harm really in le ... 1998 Volkswagen Jetta
The window on the passengers side will not go back up. Once it went down, it stopped working. What needs replaced? Can I put the window up mechanically with out changing the electronics parts, until I can afford to have the window motor replaced ?
Open your door decorated plate (except driver side), you would easily find a black box (the power window amplifier). Exchange rear left door to rear or front rigrt door vise-and-versa so that you can close or open you window without paying any penny ... 1993 Nissan Altima
1999 DODGE STRATUS RUNNING HOT I CHANGED THE THERMOSTATE AND MY FAN IS WORKING PROPERLY.WHEN I NOTICED IT WAS RUNNNING HOT I OPED THE HOOD AND SAW THAT THE LAST TIME I PUT SOME OIL IN THERE I LEFT THE OIL CAP OFF COULD THIS BE A PART OF MY PROBLEM?
Yes if it blew out the oil fill the oil to the full mark then you may have to check your thermostat to see in you turned it upside down or it's not getting water in the lower part of the block. You have to burp the system and get the air out I always ... 1999 Dodge Stratus
No power i have an 89 jeep grand wagoneer and it has a full 13 volts at the battyer but when i put the key in and try to start it. it is acting like it has a dead battery. none of the accesories work and there is no power going back into the hood. i have changed and added extra body,chasis, and engine grounds. and this did not fix my problem. any idea on where to start looking. any help will do thank you very much
At this point, I'd start tracing power from the battery (where you know it is) till you find a point where it stops. You either have a deteiorated terminal connection somewhere (under power distribution box?) or a burned fusable link.Most likely you ... 1989 Jeep Grand Wagoneer
2002 altima wont start. We pulled, and changed the crank and cam sensor. However, both of those parts looked exactly the same. does it matter if one is put in the incorrect spot? or do they both function the same?
Not it does not matter. do you know if the fuel pump is working ... 2002 Nissan Altima
I just changed my 2000 honda crv tail/brake light bulb. Now brake light works, but not tail light. I put on bulb grease as recommended by parts store. What might go wrong? How do I fix it?
... 2000 Honda CR-V