Having problems with your 2001 Saturn L-Series ?

Replacing head on a 2001 l series 2.2 ecotec what yr heads are compatable

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

The important item is your old head, if it has the flange for the EGR valve then you need a head just like it.
Repair Help & Product Troubleshooting for 2001 Saturn L-Series

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Replacing head on a 2001 l series 2.2 ecotec what yr heads are compatable


The important item is your old head, if it has the flange for the EGR valve then you need a head just like it. ... 2001 Saturn L-Series

Help me hello how are you ?? i was wondering if u can help me with a carby 3F engine on my 80 series landcruiser please? i recently blew a head gasket on the engine i took the head in to get it repaired it had all the valves replaced seats reseated and a new head gasket a new inlet/exhaust gasket as they are all on one side of the head being an old 3f engine and all anyway i replaced the exhaust with an extractor set and a replaced the following 1. spark plugs 2. thermostat 3. leads 4


Hi John, I suggest first carrying out a compression test. As you'll know a difference of readings between combustion chambers can result in misfire and loss of power. It would seem to me that if pressure is building in the cooling system there is som ... Cars & Trucks

My 2005 ecotec is now out of time since I removed the head and replaced valves how do I re time with the head already off?


... Cars & Trucks

2004 Buick Rendezvous - Heater/AC fan switch shorting out. I had issues with the switch working on only 2 speeds. I then replaced the resistor block. I then got all speeds except 2. The AC Light came on with #2 but blower not working. Also, the AC and other 'directional' switch didn't work either only worked for a 10-30 seconds. I then pulled the dash and found the switch burnt on a couple of pins. I replaced the switch and control head BUT now the fuse keeps blowing the moment of going from 0 t


... Buick Rendezvous

I have 2011 dodge 3500 cummins smokes when cold started? when started first thing in morning only around 0 blows lots of white smoke smell like unburnt diesel and shakes a bit for 10 to 15 min has had piston rings, injectors, head, a few head gasket all replaced already still does not start right after sitting overnight seems like cylinder six is missfiring when capped of does not smoke. does anyone have anyother ideas of the cause of all the smoke thanks


... Dodge Cars & Trucks

2003 3800 SERIES CHEVY IMPALA JUST REPLACED THE HEAD GASKETS AND INTAKE GASKETS NOW THE CAR WONT START


... Cars & Trucks

How do we replace head gasket in 2.2 ecotec 2003 ols alero


... Oldsmobile Alero

1989 Chevy K2500 350 will not restart after warmed up? I have replaced Heads, reset timing 0 TDC new plugs, coil, cap, button, module and pick up coil. Engine starts cold runs great but will not restart after warmed up!


Tdc is usually set at 8 degrees BTDC for an automatic and 4 BTDC for a manual transmission. This may help. Does the engine run rough at start up being set at 0TDC? ... 1988 Chevrolet K2500

How do i replace the cylinder head gasket - 1999 BMW 5 Series


This is one of the biggest jobs you can do on a car. It takes a decent mechanic about 6 hours to do. The complete engine has to be stripped. If you dont know what your doing it can be very expensive to repair any damage you do if its nt done right. M ... 1999 BMW 5 Series

Just replaced the head gaskets and timing chain on my 91 firebird with the 3.1 v6. ive rest the timing to 0' tdc. the distributor is new and just about everything else as ive been trying to resto


No idea here ,look at the valves on no1 or any cylinder come to that then take not of what cylinder it is then rotor arm should point to that HT lead,the inlet valve should be up and to the left and the exhaust up and to the right piston at the top , ... Cars & Trucks

Recently been having issues with the fuses for interior lights and lights on my heater/air conditioner display for my 1996 Lincoln town car signature series. As for the interio lights, the fuse keeps blowing. I have replaced them about 5 times in the past month. When I turn the head light switch on the clock will not show along witht he lights. the heater/air conditoner display will work when it wants to. ONe minute I will see the actual outside temperature and the temperature of the heat b


... 1996 Lincoln Town Car

I need to replace head gasket in a 2005 cavalier 2.2l ecotec


... 2005 Chevrolet Cavalier

The odometer stopped working this spring and i just replaced the gears on the motor. Still do not record new mileage, but also now speed part does not work. Reads 0 mph when off but as soon as power is turned on needle pops up to 40 mph. I have power to the speedo head. Wondering if speedo bad or sender on transmission bad.


More then likley its the speed sensor that is located on the transmission. i just had mine replaced in my pick up. ... 1987 Volvo 240

1992 GMC truck K1500 (5.7L) series noticed the voltage this morning (~34 deg F) while driving (~ 60mph) was about about 11V with only the head lights on. Over the last year or so it seems that the voltage gauge has indicated lower voltage especially in the summer time (~12.5V). The battery and alternator have been replaced within the last year. When I turned the left turn signal on this morning the speedometer oscillated quite a bit with the rhythm of the turn signal and then when I turned the


Replace the alternator, it has bad diodes. Rebuilt alternators never seam to last very long ! ... 1992 GMC Sierra K1500

Mercedes 124 series 230e broke timming chain and bent vavles replace vavles and skim head now car are miss firing on number one cylinder what can be the problem?


This is because of imprper timing, ask the service man to open the head and fix the timing of crank and cam proprly, there could be no other reason for that, hope this will solve the problem ... 1991 Mercedes-Benz E-Class

How do we replace head gasket in 2.2 ecotec 2003 ols alero


... Oldsmobile Alero

99 S-series, 1.9L-SOHC, w/ oil in coolant. 136K mi, compression @ 167 to 172, & NO water in oil. Replaced headgasket & now no bubbles in coolant. Counseled ref to history of crack(s) in #3 or 4 cam journal on 1.9L-SOHC. Trying Slick-50 w/PFT to slow or stop oil loss into coolant. So far 0 oil loss for last week. Question: this only temp fix? McWiggle60.


... 1999 Saturn SL

Hi, I am about to replace the cylinder head on my 1995 c200 Benz after a head gasket replacement. Do I need to replace the cylinder head bolts I've heard theat on some cars it is not necessary to replace them if they are in good condition thanksKen


Alot of cars have head bolts that are "strech to torque" bolts, once they are torqued, they are streched, if you torque them again, they will sterch and break. I don't believe yours are, but I would double check with a Benz dealer. All and all, for a ... Mercedes-Benz C-Class

96 Firebird, Replaced water pump, fuel pump - Now blows head gasket.


Get yourself another mechanic. This guy is not doing his job. It shouldn't cost $1600 to change a water pump and fuel pump. No proper mechanic would remove a thermostat to replace the O-ring and put the old thermstat back in. It wouldn't be uncommon ... 1998 Pontiac Firebird

1996 SL1 after engine overhaul oil is having to be added regularly. Rings replaced, valve seals replaced, valves ground and reseated and head pressure tested by machine shop, head gasket replaced, timing cover gasket remade, oil pan gasket remade, crank and connecting rod bearings replaced, intake and exhaust manifold gaskets replaced. Compression on all cylinders 120 psi or better, no smoke in exhaust, cleaned EGR valve and throttle body. Used upper and lower gasket sets to replace all gaske


Depending on how long since the overhaul, and how much oil is being used, you may not have any worries.Engines built in the factory are within very close tolerances. Engines rebuilt in the shop are not.So like it was 50 yrs ago, your rebuilt ... 1996 Saturn SL

Egr cooler repalced to get us passed warranty - oil cooler was not replaced prior to 160k warranty exipred- on vacation 2000kms away (only 11000kms after egr cooler fixed) from home towing a trailer overheated was told head gaskets done and heads pitted. would this be caused by the egr cooler not being the proper fix in the 1st place? when replacing head gaskets - egr cooler replaced again and this time also oil cooler


If the dealer put an egr cooler on and didnt replace oil cooler, it can blow out egr cooler again , restriced oil cooler causes egr cooler to blow out , which in turn can cause overheat and blown headgasket also, if you are seeing white smoke now it ... 2005 Ford F 250 Super Duty

1989 Plymouth acclaim. 4 cyl turbo. what is the sequence & torque numbers when replacing head after head gasket replacement? is there a cheap or free manual online? is it advisable to replace head bolts also?


... 1989 Plymouth Acclaim

So, on my 2000 AUDI A6 2.7T I have now replaced the waterpump, the thermostat, the timing belt, the tensioners, guides and still the car overheats. The mechanic says the heads could be blown, so we put 500ml of Loctite Block and Head sealer in to see if this will work before we embark on the next expensive head gasket replacement cure. I had the heads done 25000kms back, and do not drive this car hard. Could they have blown again and can Loctite Block and Head Sealer solve this problem?


WELL CHECK THE ENGINE OIL.IF IT LOOKS LIKE MILK SHAKE. THE HEAD GASKET IS BLOWN.YOU CANT USE LOCTITE BLOCK AND HEAD SEALER TO PATCH UP.IT WILL STOP UP THE HEATER CORE AND RADIATOR.WHEN ENGINE OVER HEAT CHECK TO SEE IF COOLANT FAN TURNS ON IF NOT.CHEC ... Audi A6

Wont start replaced intake manfold gasget, replaced head gasget , replaced valve cover gasget, replaced spark plugs , the engine is a 350 v8 290hp crate engine. was smoking from exhaust on left side so i replaced these parts because a friend told me it was my head gasget leaking and now it will trun over but wont stay running sounds like a vaccum leak but i cant find it .


Most vacuum leaks are in hoses that are disconnected or have holes in\015\012them you can also take a bottle of water and spray it along the side of\015\012the intake and base of the carborater if the motor bogs or you here it\015\012**** the water i ... 1985 Chevrolet Monte Carlo

Wont start replaced intake manfold gasget, replaced head gasget , replaced valve cover gasget, replaced spark plugs , the engine is a 350 v8 290hp crate engine. was smoking from exhaust on left side so i replaced these parts because a friend told me it was my head gasget leaking and now it will trun over but wont stay running sounds like a vaccum leak but i cant find it .


Check the backside bottom of the carb. there's a vacuum port there. Make sure it's plugged up. How's you timing? Also try rotating distributor back and forth. It may be a timing issue. Not enough or too much. ... 1985 Chevrolet Monte Carlo
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.8210 seconds