Having problems with your 2001 Saab 9-3 ?
HOW TO REMOVE BRAKE BOOSTER ON 93 SAAB from firewall thanks
You have to remove the nuts from inside the car behind the brake pedal - also remove the brake pedal switch.
Repair Help & Product Troubleshooting for 2001 Saab 9-3
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
HOW TO REMOVE BRAKE BOOSTER ON 93 SAAB from firewall thanks
You have to remove the nuts from inside the car behind the brake pedal - also remove the brake pedal switch. ... 2001 Saab 9-3
I am removing a brake booster on a 72 Ford pickup. I removed the 4 bolts holding it on. But now I am having trouble removing from the firewall. There is a large round plastic piece that goes inside the brake booster from the back and that seems to be all that is holding it on. I don't want to break anything.
The brake pedal has a rod that will be removed from the auctuator to remove the booster from your truck ... 1981 Ford F 100
Brake Booster Removal - 1999 Jeep Cherokee Classic 4.0L
Use a swivel socket or look above the firewall on the inside and look for a bolt or ujoint that will undo so u can slide it up and out of the way ... 1999 Jeep Cherokee
How do I remove the brake power booster from a '97 Thunderbird? I'm getting a hissing sound and can feel air under the dash when I press on the brake pedal. All of the bolts, clips, master cylinder, etc have been removed but I cannot get the necessary clearance to remove the booster. Is there some magic trick Haynes doesn't tell us about?
Remove the rod going to the brake pedal,then remove the master cylinder,you may can unbolt the master,from the booster,and move it out of the way without removing the brake lines,they will give quit a bit.Now go back inside and remove the four nuts o ... Ford Thunderbird
Removing power brake booster!
Can you not get to it with a long 1/4 drive socket socket?? i have never done one so honestly wouldnt know but with the right tools a lot of things can be accessed ... 1999 GMC Sonoma
Removal of brake booster from a 1979 Mercedes 450SL
Remove under dash panels,carpet & move relays aside.It's tight in there. Watch spacers on piston bolt to brake pedal. ... 1987 Mercedes-Benz Mercedes Benz 400 Class
My brakes will tighten up as you are driving. They will tighten so much that if you let off of the gas the car will stop. The brakes smoke. We have replaced the power brake booster, vaccuum hose, flex hoses on the left and right. The brakes hold so tight that the transmission does not want to go into overdrive. If you remove vaccuum hose from booster the brakes will release. What now?
Try replacing the check valve in the brake booster vacumn line see if it helps you can test it first by blowing in it, you should only be able to blow in it 1 way but not the other ... Hyundai Accent
Brake light and abs light stays on after i replaced the the brake booster had to remove master cylinder to do so aftervreplacing booster brakes are fine but the aqbs and brake light stay on
Sounds like the brake fluid level sensor maybe stuck . it is in the master cylinder reservoir. if you open the cap you will see a float in there. push on it and tap the side of reservoir and it will float back up. let me know if you have any more que ... 1997 Dodge Dakota
Replaced Master Cylinder and Brake Booster on 03 Bravada and pedal still drops all the way to the floor instead of stopping at half-way of pedal travel? No visible leaks in hydraulic system but it acts like it. Replaced new Master Cylinder with a second Master Cylinder just to verify that I got a good part but still had problem. Manual brakes work like normal when vacuum is removed from Brake Booster; no dropping to the floor. Brake pads and calipers on all 4 wheels look good and no leaks in bra
Did you replace the master cylinder and booster because of this? If so then did this problem follow any maintenance done on the brakes? Was there any leaks prior to the replaced parts?The pedal dropping to the floor with no leaks would point to ... 2002 Oldsmobile Bravada
I have a 1995 tahoe and just replaced the brake power booster. I had to pry off the switch interruptor, which is located on the brake pedal, to remove to the power booster cable. I've got it all back together, but the brake lights dont want to work. I bought a new switch to replace the old, but it did not come with the lock washers I had to pry off. I can get under where this part is located, and barely push the pedal, and stick a small screwdriver into the switch, and the lights will come on. A
The retainer that was damaged upon removal does not provide a ground path for the lights, however the spring tension does hold the switch in position.\015\012 These retainers are available at your local dealership as brake switch recalls are qu ... 1995 Chevrolet Tahoe
I think my 99 grand cherokee power brake booster is leaking.Since the cold weather,it hisses in floorboard and deacreases on acceleration or when I press brake peal.When I unplug the vacum hose uner hood on firewall the hissing sound goes away.So does the power brake booster need replaced?
Replace it , may as well do it before it quits altogether ... 1999 Jeep Grand Cherokee
I have a 2002 SAAB 95 Aero that was running fine but developed a leak in the brake booster (made a hiss until you touched the brakes). I had the booster replaced and now it is quiet until you touch the brakes and then you hear a faint hiss. After I had it replaced I heard a very faint knock (or ping) under very light acceleration and took it back to the dealer. They said they couldn't hear it. My wife said it sounded more like something was loose. I gave up and just tried to avoid the conditions
Check the ac vacuum routing also since vacuum lines are attached to that. You may have water in your fuel as well causing the pinging. Add a can of HEAT to the fuel tank ... 2002 Saab 9-5
We are attempting to remove & replace the vacuum brake booster onour 1984 full size chevrolet blazer. The brake rod does not come out easily, any suggestions?
Doesn't the new booster come with a pushrod in it? ... Chevrolet Blazer
How to remove brake booster from 93 sarb 2001 model nuts are betw
... 2001 Saab 9-3
I'm replacing my brake master cylinder on a 2000 Dodge Van, 3500 5.9L. I'm having problems removing it from the power booster. Is there something I'm doing wrong or do I need to remove the booster also. Any help would be appreciated. Thanks
The master cylinder is held to the booster with bolts.. Remove all lines connecting to the master cylinder, remove the cap, remove the bolts that hold it to the booster,, twist and turn it out while culling back,, twist and turn.. ... 2000 Dodge Ram Maxi
When I push in on the brake padle it activate the brakes but when I lift my foot and try to brake again the paddle seems to harden untill theres no brakes.Brake-paddle remains hard for a couple of seconds but when you release the paddle and drive for a metre the brake seem to work again.It seems as if theres a leak on the brake air line because when I remove the air hose at the brake booster it **** very poor.Please assist.
There is either a restriction or break in the hose from the engine to the booster or booster is faulty.You experiencing lack of brake boost assistance as you have correctly diagnosed.Hose should have a one-way valve in it near ... BMW 318
I HAVE A 1991 SUZUKI SWIFT SF416 G16B - i WANT TO TAKE THE ALTERNATOR OUT - I HAVE DISCONNECTED IT - BUT AM HAVING TROUBLE REMOVING THE ALTERNATOR FROM THE ENGINE BAY-i HAVE REMOVED THE WHEEL AND STRUT IN AN ATTEMPT TO LOWER THE CV AND REMOVE FROM UNDERNEATH - BUT NO GOOD - ICAN SEE THAT IF I REMOVE THE BRAKE BOOSTER AND MASTERCYLINDER IT WILL ALLOW ME TO LIFT IT UP AND OUT - OR MAYBE REMOVING THE CATALITIC CONVERTOR IS ALSO A POSSIBILITY - WHAT DO YOU THINK- MARK ECCLESTON
... 1990 Suzuki Swift
1989 ford thunderbird std brake system vacuum booster install?
There are a Couple of Different Variations on the Boosters. Make sure that you have the Correct one First. If you do, Just work it, Some of the Rods are Removeable by the Way. ... 1989 Ford Thunderbird
How do you remove the booster pin from the brake pedal
... 1996 GMC Jimmy
2000 rodeo brakes failed to work after removing brake booster and replacing. Tried bleeding- front brakes will not bleed.
Did you try and bleed the master cylinder first?With out the lines connected to it?Bleed the master,by holding your fingers over the outlets,then connect the lines in the master cylinder,and bleed each line by loosening the lines.Then bleed the right ... Isuzu Rodeo
Brake booster removal
Hi John, You will need to disconnect the push rod from the brake pedal but do not adjust it at all. Take a flash light and shine it up at the top of the pedal to see if there are securing nuts holding the unit from inside. (I'm pretty sure the ... 1991 Alfa Romeo 164
Remove and install brake booster 1997 GMC Jimmy 4.3l vortec
... 1997 GMC Jimmy
How to remove power brake booster on 1977 ford maverick
... 1977 Ford Maverick 3.3
Removing brake booster isuzu hombre
... 1997 Isuzu Hombre
POWER BRAKE BOOSTER REMOVAL,HELP!
Remove master cly. from booster. then under dash remove clip & pin from brake pedal . pull carpet down remove 4 nuts . pull off booster.. ... 1994 Chevrolet G20