Having problems with your 2001 Oldsmobile Intrigue ?

What tools are needed to fix a air injection pump for a 01 oldsmobile intrigue

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 2001 Oldsmobile Intrigue

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

What tools are needed to fix a air injection pump for a 01 oldsmobile intrigue


... 2001 Oldsmobile Intrigue

Need to purchase secondary air injection check valves. Must I go through a dealer ? '01 Olds Intrigue. Air pump replaced 2 months ago , now informed I need above referenced parts. (Secondary air valves...need Bank1 and Bank2. Tried 2 local parts dealers no luck.


I would, get them from dealer, this way you get the right parts, i checked a couple of places also and no luck also, dealer can order parts if they dont stock them, if you want try rock auto.com. i just checked and they can get it.there are two types ... 2001 Oldsmobile Intrigue

Oldsmobile Intrigue 2002 GLS 6 CYLINDER, 3.5 L Upon Testing: Air Pump is working but Air Pump Shut Off Valve Not Holding Vacuum. New Replacement Part is Expensive. Is it possible to Fix the Existing Valve? without buying the new replacement parts Part: Left Valve 611 # 12559951 Part: Right Vave 614 # 12559949 Please let me know. Thank you. Tilak


... Oldsmobile Intrigue

2001 oldsmobile intrigue secondary air injection malfunction no power to the air pump checked all fuses ok checked grounds ok replaced relay under hood did not work please help


Motor has probly failed-n hav it inspected n electrically tested-a repair manual is very helpful-may want to do code scan to confirm ... 2001 Oldsmobile Intrigue

My service engine light went on and brought codes P0492 & P0493 . I was told it was the secondary air injection system. I brought the car in to have it checked out and they said the secondary air pump needed to be replaced. I have not had it fixed yet because I was told it wasn't urgent, however, now by MPG gauge is malfunctioning and it never did this before. When I begin to approach a stoplight and I am coasting towards the light (not foot on either peddle) the gauge heads towards 40mpg. As so


I'm not sure if you fixed your problem yet but I had some similar gremlins on my 2001 540. Just a word of advice. Ensure that the tube from the air pump to the manifold is clear. This can occasionally get blocked and this is what causes the air pu ... 2001 BMW 5 Series

My 2001 Buick LeSabre has electronic load control. The air pump stays on, so my car is jacked up very high at the rear. What do I need to do to fix this problem? Read more: My 2001 Buick LeSabre has electronic load control. The air pump stays on, so my car is jacked up very high at the rear. What do I need to do to fix this problem?


Your load control sensor under the vehicle is broken or has become disconnected so it thinks you have a heavy load and is constantly running the compressor. you have get under vehicle and look for the sensor it is connected between the rear suspensio ... 2001 Buick LeSabre

What tools do i need to fix a tie rod - 1999 Oldsmobile Intrigue


... 1999 Oldsmobile Intrigue

I have a 2006 pontiac grand prix with the check engine code po2440, secondary air injection valve stuck open. I have replaced the value twice, replaced the air pressure sensor, the air pump, a relay to the air pump, and a relay to the air valve. It has been a problem for me since Feb. and I still can't fix it. I took it to a mechanic/electrician and we still can't solve the problem. Any advice would help.


... 2006 Pontiac Grand Prix

Power steering pump whines 88 Ford Bronco II Pump an gear are new the lines to the steering box were leaking i fixed them its full if fluid it never ran dry or to low it would leak about a tablespoon a day it may have air in the line somewhere can i fix this easy or do i need to take it to the shop


Jack the front up put it on supports. Then make sure there is fluid in resivore. Start turning wheels back and forth all the way from stop to ststop. It sounds like air to me. Leave the cover off have a buddy look in while you go back and forth if yo ... Cars & Trucks

My S10 blazer lacks power, bogs under acceleration, recently truck would not start, took it to a garage and they replaced the injections module( "spider injection module, complete unit"), truck still lacks power and bogs under acceleration. took it back to the garage and they hooked up the scan tool once again, did a bunch of tests, said the fuel pump is on the low side of the spec. I replaced fuel pump and fuel filter and the truck still lacks power, the garage said the idle air control mod, th


Sounds to me like a bad fuel pressure regulator. I would replace that and see what happens, if that fails you may have contaminated fuel ... 2000 Chevrolet Blazer

I need a diagram on how to reset the injection pump on a 240D mercedes diesel, 1974 I removed the head and found a broken head bolt, I put the crank on tdc- I put the cam tdc, but did not know that you had to screw in a tool to the injection pump, please help, I am a pretty good mechanic but many gas cars, thanks j.c.


Go post this problem at peachparts.com forum. Those guys can do this in their sleep. ... Mercedes-Benz 300-Class

I need a link or a better explanation on the code that poped up on my 2001 gmc jimmy, code is PO410B, the explanation the reader gave me was, secondary air injection reaction injection system incorrect flow detected. I need to know how to fix the problem. Its a 2001 gmc jimmy, 4 door V6 4X4, any help email me wiyh answer or link at [email protected] Thanks.


What does that mean?\015\012The P0410 code refers to the emissions system. The AIR pump puts air to the \015\012 exhaust to lower emissions. It takes in outside air and pumps it through two \015\012 one-way check valves into each bank of the exhaus ... 2001 GMC Jimmy

I have a 2003 oldsmobile alero 4 cylinder and had my water pump replaced recently by a guy, who is a ford technician. After it got fixed noise started coming from my car so i took it to a shop. they said he didnt set my timing. The guy wont give me my money back cause he beleives the timing has nothing to do with installing a water pump. i need to know how to install a water pump and cant find any sites how. HELP!!


The guy was correct. Replacing a waterpump has absolutely nothing to do with the timing. ... 2003 Oldsmobile Alero

I have bought a 1991 f330 diesel dually ext. cab leriat i replaced the transmission with a warrenty rebuilt all together i spent 2400 on just the fix i have had it back and fixed the vacume pump and heater core tail lights and still need to fix the dash light and air cond. but before i could do that the transmission blew the tranny fluid again and wont move


If, as you have indicated, there is a warranty on the transmission repair....take it back to the facility that did the work and make them fix the issue. ... 1991 Ford F350

I have a 2001 hyundai accent and my gas will not contiuously pump at any gas station i go to. ive tried pulling the pump out to allow air, ive tried putting it all the way in, moving it up down left right, nothing works. i can only pump about $100 worth of gas and it stops. whats the problem or what do i need to get fixed?


There is a Technical service bulletin for your vehicle that covers this problem. It involves diagnosis of your fuel vapor system. Technical Service Bulletin # 99-30-002\015\012Hyundai vehicles are covered under warranty for 10 y ... Hyundai Accent

Power Steering needs topping up daily & there's oil dripping to the floor, also the rack boot needs replacing. As we don't have $2'000 for a garage to "fix" the power steering problem, How hard is it to remove the power steering pump, hoses, rack & steering? & replace with a manual steering rack & steering? Do we need any extra special tools, or can a couple of back-yarders do this replacement?


If you are up to it, you can remove the Rack and Pinion and have it rebuilt. Most of the time the rebuild kits can be purchased locally, but I recommend you have it rebuilt by a professional. I usually just buy new Rack and Pinions and get the old on ... 1984 Subaru Brat

2001 aurora secondary air injection needs fixed what is the cossst


See this link for a common problem...Oldsmobile Aurora P0410 ... 2001 Oldsmobile Aurora

I need a diagram of the fresh air injection air pump for a 2003 Chevy S 10


I don't have a diagram. What do you need to know? It is mounted under the radiator and the fuse for it is in the little fuse box beside the battery. ... Chevrolet S 10

I have an 4dr 2001 chevy cavalier(silver)auto sedan the heat and air were both working until i replaced the heater core now the air works but heat won't. My Abs light is on and a personal mechanic says i need brake disc replaced and my abs system is sending mixed signals to my back brakes which locks up tires when i stop and they screech bad but will stop. I am wondering what is the exact problem and what to do to fix it. also when i pump the brakes the car kinda goes down and lifts up when i re


First you prob need too burp the system too get heat second you need too see another mech about your brakes, hes either dont know what hes talking about or going too rip you!!!!!1 ... 2001 Chevrolet Cavalier

Need to reset a fule pump in OLDSMOBILE - 1998 Oldsmobile Intrigue


Reset ? if pump not working check relay and connections and for pressure if u have power to pump and no fuel pump needs replacement ... 1998 Oldsmobile Intrigue

I have a Mercedes e 300 1999 temperature engines remain on the 100 c, even after i replaced the radiator and fan and the water pump and fixed the above block. the pipe at the top of the radiator is very solid there seems to be air after all what i have done. the mechanic told me that the down block may need to be fixed so i'm asking before he does any thing.


Alright, If there are no leaks on the hoses then the mechanic will go down the block. He'll surely will look for cracks on the block which can cause excessive stress on the engine. But I suggest that before opening the block ask him to tighten the cy ... 1996 Mercedes-Benz E-Class

On a 2002 saturn l200 with an abs system, do i need to use a scan tool to return the rear displacement cylinder pistons to the home position or the upmost position, the manual i have says it will run them to the top of their travel. I have replaced the master clyinder and front calipers. On the first pump the pedal goes to the floor, then after the second or third pump i get pressure to my pedal. we have bleed the system with a pressure machine and there is no air or leaks are these rear dis


No there is a spcial tool available at auto zone or advance auto. with tool screw the piston back in. make sure piston is in position so pad fits up tight against the piston ... Saturn L-Series

The water pump pulley fell off my '93 oldsmobile cutlass ciera S (6 cylinder). Is the pulley a separate part that I could replace? or must I replace the entire water pump? Is that something I could do myself (with minimal tools...i.e. screwdriver, wrench, socket...etc...) or would you recommend that I tow to a garage and have it fixed? Thanks very much!


Pulley is bolted to the water pump. If the pump shaft failed you need to replace the pump. If you have a clutch on the fan, and that failed, providing that the pump shaft is not loose or binding and pump is not leaking, you can replace the clutch (do ... 1993 Oldsmobile Cutlass Supreme

I went to have my 88 towncar inspected and the guy said i need a power steering belt, the power steering pump&box leak and the pitman arm is loose. what kind of tools am i going to need to do this project and is it an easy fix to do myself??


NO. Take it to a shop. You cant afford a mistake in your steering system.\015\012By taking it to another shop, dont go back to the inspection station for the work, you will get an independent review of the problem and possibly a smaller repair ... 1988 Lincoln Town Car

No acceleration We have had the same issues with glow plugs. However, these have been fixed time and time again. Now we cannot get the car to go over forty. It has no acceleration. I don't believe that it is the injection pump, not getting, heavy smoke. Need some help great car and need to get it back up and running.


Ok, have you checked all the turbo hoses are connected and have no splits, if all is ok, and the clutch is not slipping it is most likely the air mass sensor. do not buy a pattern part they fail all too quickly, buy a genuine vw part normally approx ... 1998 Volkswagen Jetta
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.5687 seconds