Having problems with your 2001 Jeep Grand Cherokee ?

Entire heater needs to be replaced

\015 The car is a Jeep Grand Cherokee. What is the cost for the whole housing (box) and labor?\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

I work at a dealer and generally its is 8 hours labor to remove the dash. disassemble the HVAC box, repair whatever doors or motors broke, checking the Evaporator and heater core for leaks. and it typically comes out to around $1400 when all is said and done but thats also at $90 per hour
Repair Help & Product Troubleshooting for 2001 Jeep Grand Cherokee

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Heater core removal. need some information far more than a chiltons can explain in written for or pictures. need to replace the heater core, i have removed the most of the dash and the blower motor and airconditioning assembly in the engine compartment. I am struggling with the rest of the dash i cannot get all of it disconected to get the heater core out, i took a hack saw to the heater box and broke some things in anger and it is still in there. i now will replace entire heater box but need so


You can find it at www.aa1car.com ... 1995 Ford Explorer

NEED TO REPLACE THE HEATER FAN IN A 2003 BUICK LASABRE. PLEASE ADVISE IF FAN BLADE CAN BE REPLACED OR DO I NEED TO REPLACE THE ENTIRE BLOWER MOTOR & FAN? THIS IS THE INTERIOR FAN FOR HEATER AND AC.


The fan "blade" is a tubular rotating device that looks like a mouse treadmill. it can't go bad. if it is binding, free it. it is almost certainly the motor which will probably come with a new fan cage. ... 2003 Buick LeSabre

Need to replace heater core on 96 tbird....I have Instrument panel out.....glove box out.....center console (climate control unit and stereo) out......have heater hoses disconnected and two mounting nuts on engine side firewall off....It looks like I need to take out the entire dashboard....Is that true? I can't see any other way of getting it out.


\015\012\015\012\015\012\015\012\015\012\015\012Section 12-03A: Air Conditioning System—Manual A/C-Heater \015\012\015\0121996 Thunderbird, Cougar Workshop Manual \015\012REMOVAL AND INSTALLATION \015\012\015\012\015\012Heater Core ... 1996 Ford Thunderbird LX

1998 Windstar, 3.8L. leaking coolant at metal connector of heater hose. does the entire heater hose need replacing or can the connector be replaced?


With ford you usually need to replace the entire heater hose, and it is kind of pricey. ... 1998 Ford Windstar

I replaced the blend door on a 2001 Jeep Grand Cherokee 2 months ago and the dealer recommended that I cut a hole in the "Black Box" to repair it. That worked great. Now I need to replace the heater core, Is there an alternative way to replace the core without tearing out the entire dash and black box? Thank you!


... 2001 Jeep Grand Cherokee

Instructions replace heater core. Do I need to remove the entire dash to access the heater core? It is really looking that way to me.


... 1997 Toyota Tacoma

1998 Jeep Cherokee - I am trying to replace my heater core, the illustrations in the instructions do not match what is in my Jeep. I don't have a "lower portion of the instrument panel" to remove. I had to remove the entire dash! The housing assembly does not match the pictures in the illustrations. Is there something different about the 1998? Is there a book with the exact description? Do I need to remove the entire plastic assembly? This is a rather large part! Thanks Bernie


Yes.... the whole plastic part has to come out, then apart. ... 1998 Jeep Cherokee

I'm trying to replace the heater core in my Amigo but can't figure out how to get to the housing within the dashboard. Do I need to disassemble the entire dash or can i take apart a specific section to gain access to the housing for the heater core?


Isuzu_Amigo_1998-2000 Repair Guide\015\012Heater Core - Removal & Installation\015\012\015\012\015\012If equipped with an air bag, perform the following procedure:\015\012\01 ... Isuzu Amigo

I have a 1992 Camaro RS 305 V8 with EFI that is in "absolutely flawless" showroom condition, all original, with 19,000 miles. Nothing has ever been replaced except the battery and the car is basically for car shows. The heater core has started to leak and I need to replace it without damaging or scratching anything inside the car, as the complete interior and rugs are as good as the day they were new. I have heard horror stories about having to pull out the entire dash, steering column, etc.,


My Chilton manual is for 93-98 camaros but it's directions for replacing the heater core are to remove the glove box door to gain access to the heater core. I know the taurus had this problem, as I had 2 of them given to me ... 1992 Chevrolet Camaro

Bought a used 1996 couger and the heater core is by passed. im asumming the heat core needs replacing is it necessary to remove the entire dash my haynes manual does not say to remove it but when i follow the directions i cant get to the core. please help


1996 mercury cougar heater core replacement\015\012we just bought a car with the same problem\015\012http://members.tccoa.com/timb/Heatercore.htmwe did not have the bolt above the gas pedal"1 on the tunnel above th ... 1996 Mercury Cougar XR7

Entire heater needs to be replaced


I work at a dealer and generally its is 8 hours labor to remove the dash. disassemble the HVAC box, repair whatever doors or motors broke, checking the Evaporator and heater core for leaks. and it typically comes out to around $1400 when all is said ... 2001 Jeep Grand Cherokee

I have a 1994 Camaro with a coolant leak. I found the leak and need parts. I found one part: DORMAN OEM REPLACEMENT HEATER HOSE CONNECTOR -- 5/8 in. To 1/2 in. Thread Heater Inlet Hose, A High Quality Direct Fit OEM Replacement Heater Hose Connector This product fits the following 1994 Chevrolet Camaro submodels 1993-1995: Base; 6Cyl 3.4L GAS, FI, VIN "S"; Manufacturer number: 800-401 I also need the fitting that feeds into it and I cannot locate that.


Most Autoparts stores, carries fitting of shapes and sizes, if you know the correct size you can find it there, otherwise bring the piece of hose into the store and they can fit one for you. ... Chevrolet Camaro

I need to replace bulb in center console of a 2005 Chrysler Town & Country. I can take the radio/DVD- heater A/C cover off and remove the heater/fan assembly unit. I need to take assemply unit apart to replace the bulbs that light up the display with out breaking it. Has A/C, Heater, Fan with the Front/Rear fan control buttons. Took screws out, but it didn't seem to want to come apart. Any info would be great. Thanks


Bulbs in there are not-replaceable.  ... 2005 Chrysler Town & Country

Need to replace heater core I need to replace my heater core and want to know the best way to do it


You will have to remove the entire dash assembly and then remove the air conditioning/heater case and this will enable you to have access replace the heater core, this is a really tough job did it 3 or 4 times while working at a Ford dea ... 1996 Ford Thunderbird LX

Bad hoses i have a 1998 jeep grand cherokee and its got about 150k on it. i was recently informed by my wife that we need to replace the heater hoses and the bottom radiator hose after breaking down and replacing the top radiator hose. i need to know where the heater hoses are located, how many of them are there, and how do i relplace them and the bottom radiator hose. i'd look for it myslef, but im in iraq currently and want to get a visualization of what i'm in for when i get home cause i do n


The lower radiator hose goes to the water pump, will have to drain radiator to replace it. You should hae 2 heater hoses, if your engine is an inline 6 cylinder one hose will go from the frot of engine by thermostate housing to the firewall and the s ... 1998 Jeep Grand Cherokee

How much work needed to replace heater core in celica 1990,i know some off the dash etc needs to be removed,or does it?and how long,any idea on areplacement cost off heater core?i've done years ago a commodore vh,and that was a narsty piece off replacement,as evey thing had to be removed,hope this will be easyier thanks


... 1990 Toyota Celica

My heater and A/C switch is not working. I've ruled out fuses and the blower motor. The heater switch is vacuum, I know nothing about vacuum switches! I need some ideas as to what may need to be replaced or changed, or also what may need to be done to get my heater working.


The vacuum motors or switches are vacuum operated by solenoids connected to the vacuum created by the intake manifold through rubber or metal or plastic tubing.\015\012\015\012The diaphragms can break over time which are made of black rub ... 1987 Chrysler Fifth Avenue

Passenger front signal does not work; rear passenger signal flashes faster. Need a bulb? Fuse is still good.(15amp #11) Recently replaced both license lamp bulbs, license lamps do light up. Did not have signal problem until after the license bulbs were replaced. If I do need a bulb, do I simply screw the signal lens cover in the lower front fascia off and replace it? Or do I need to remove the entire fascia? P.S. Driver side signals work fine.


Yes it's a bulb. Open the hood and remove the phillips screw. Then carefully wiggle the fixture out to reveal the bulb and plugs. ... 1992 Acura Integra Hatchback

I need to replace the throttle sensor. however, the replacement part I got at the autopart store looks NOTHING like anything on the throttle body or anywhere near it. Could they have changed the type of throttle body and sensor in the middle of the year and I have one of the vehicles assembled in the first wave of production? What needs to be done to replace the TPS at this point? Do I have to replace the entire throttle body?


According to the parts catalog, the throttle position sensor for a 2004 Verona should be a small plastic potentiometer with two screw holes and a connector plug.It should mount on the opposite side of the throttle body from the accelerator cable. ... 2004 Suzuki Verona

The air compressor is making a loud noise and the "shop" tells me i need to replace the compressor because all the belts need it. I don't need the a/c, which doesn't seem to matter with this repair. Do I need to replace the entire air compressor on my 1996 Dodge caravan?


Usualy the front berring goes out of those and yes it is loud. just find one off a low milage vehical at a junkyard have it installed just dont have it charged or pluged in than the pully will be there for the belt to ride on but the air conditioning ... 1996 Dodge Caravan

I have a 2005 Chevy Impala LS, 3400, the temperature gauge fluctuates passed 220 degrees and cools down. when turning on the heater in the car it blows cold air. I have replaced the thermostat, and the car continues to do the same thing, still when turning on the heater in the car, the heater still blows cold air. It has reached the 260 degree mark and the warning light has come on. What is it that I need to replace, to get this to stop? How can you tell if the water pump is bad, or the heater


Usually if the core goes bad it fogs things up and stinks bad' ... 2005 Chevrolet Impala

I need to replace the bearing on my Pronton Gen 2's fanbelt Tensioner. Is it possible to replace the bearings only or must the entire tensioner be replaced. If the bearings only can be replaced I also need the specs on the bearings Thanx


Pressed unit , replace the hole thing. ... 2008 Mitsubishi Lancer

Need info in relation to oil pump (shaft) is it replaceable or do i need to replace entire engine?


What engine size ... 1987 Toyota Celica

I am needing to put on an entire back hatch with window back on 2002 Mercury Mountaineer. I was hit in the rear and it broke my rear window and dented and banged up the entire back end. I have bought the replacement part and have it painted, now I need to know how to take off the banged up entire rear hatch and put on a new one. Thank you tons. Billy & Stacy


Does the hatch open up electrically??? If not, then just take off the hinge bolts and struts, hold the new door in place, re install the bolts ( without tightening them completely) and then shut the door and see where it has to be adjusted correctly ... 2002 Mercury Mountaineer

We have replace the heater core and heater hoses in our 1997 Pontiac grand am gt and we still are not getting much heat coming thru the vents. the blower motor is working. We need help determining which heater door needs to be opened to let the heat pass thru?


I can't speak to your specific car, but in general auto heating systems, it could be a number of other things: \015\012\015\0121. The control unit might not be sending the correct signal to the valve that controls the flow of hot water i ... 1997 Pontiac Grand Am
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.3897 seconds