Having problems with your 2001 Ford Taurus ?

2001 ford taurus timing belt repair - 2001 Ford Taurus

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for 2001 Ford Taurus

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

2001 ford taurus timing belt repair - 2001 Ford Taurus

... 2001 Ford Taurus

2001 ford taurus timing belt repair - 2001 Ford Taurus

... 2001 Ford Taurus

Need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

\015\012Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question. ... 1994 Ford Taurus

Timing belt is it true that the 2000 ford explorer 4,0 engines has 2 timing belt on them; its a 6 cyl. thank you godbless

The 2000 Ford Explorer that has the 4.0 Liter engine, is an SOHC engine. Single OverHead Camshaft.It has one camshaft sprocket, one camshaft chain, and one crankshaft sprocket.The 2000 Ford Explorer that has the 4.6 Liter engine, is ... 2000 Ford Explorer

I have a problem filling my 2003 Ford focus gas tank. The pump keeps shutting off and I can only fill a little at a time. I had the car checked at STS Auto center in Island Park NY and the mechanic replaced the part (pro x x f 8 5 z 5 0 0 CA) Canister vent $ 159.95 and the problem still exists. I paid $ 222.00 for this repair that did not work. When I returned to the repair shop the mechanic put the car back on the lift and could not see anything wrong. He blew air in the tank and suggested

I have had the same problem a few times myself, usually just pulling the the pump out alittle stops the problem, its usually from the gas backing up in the line and not enough air coming out of the tank ... 2003 Ford Focus

Does a 1995 ford taurus have a timing belt? - 1995 Ford Taurus

The 3.0 and 3.8 V6 have a timing chain not a belt, lasts life of engine in most cases ... 1995 Ford Taurus

1984 928 began running very rough & lost all power. Shop indicates 0 compression on 4 cylinders and that likely cause is slipped timing belt and damage to valves on one side. I thought 1984 engine had ''non-interference valve design'' and that valve damage would not result from slipped timing belt. I don't want to spend $4,000 on a repair I don't need. Does the diagnosis make sense?

Depending upon the rpm that the engine was turning at, I have seen "non interference" engines bend valves on a timing belt or chain failure. if you have 0 compression on that bank, it will need to be torn down to find out why. BUT I would do a ... 1984 Porsche 928

2000 Ford Taurus front pass. side seat belt, retractor will not release the seat belt. Obese passenger tried several times to pull more seat belt than was there and now the seat belt retractor fails to work.

... Ford Taurus

What size engine in a 1992 Ford Taurus? and is that a timing belt or timing chain?

3.0 v6 and 3.8v6 has t-chain ... 1992 Ford Taurus

ALTERNATOR BELT Ford taurus 88. Need print out of diagram & instructions on how to put belt back on. Also, does nut need to be put back on pulley w/torc,compressor or manually. Is there suposed to be a lock washer holding nut on? Nut came off of pulley. Trying to repair.


Does 96 taurus have a timing chain or belt - 1996 Ford Taurus

... 1996 Ford Taurus

1998 ford escort timing belt 'slipped'. Making a rattling sound when started. Need to know if clearance engine, how much should repair cost,how much just parts. Thanks-will probably do repair myself if possible but will ask about that when/if I do it. Thanks- Ed

Hi, in uk timing belt replacement would cost between 80 and 120 pound to do it yourself would cost 20 pound for the new belt but as the belt has slipped this could mean the tensioner needs replacing or has come loose so this would need checking. ... Ford Escort

I'm replacing the serpentine belt on 1994 Ford Taurus with 3.8 Liter. There is no sticker under the hood the shows how to route the belt and the repair manual I have doesn't show it either. Any help would be appreciated.

Here is a website you will need to click on the camera as there are two choices of the police package, hope this helped Tim:http://www.gates.com/part_locator/index.cfm?location_id=3598 ... 1994 Ford Taurus

I have 98 ford ranger 2.5 that broke the timing belt; What type of internal engine problems might I be looking at? I replaced the belt and did a compression test and have 0 compression.

Hello gandolfph: My name is Roger and I will help with your question. I have Alldata and Mitchell on demand programs. I looked at both and neither one says this is a interference motor. That is where the valves bend if the belt breaks. I would go bac ... 1998 Ford Ranger SuperCab

My timing belt broke on a 1993 atx ford taurus SHO and I need to know how to reset the timing on the engine. It is a 3.2L 6 cylinder 24 valve dohc engine with a automatic transmission.

Make sure all lines on each pully are facing the number 1 cylender at top dead center ... 1993 Ford Taurus

Is the timing belt cover near the water pump on 2000 ford taurus

... 2000 Ford Taurus

I have a 93 ford escort. 1.9. I recently had the timing belt replaced and had a really bad oil leak repaired. the car recently started trying to stall on the interstate (bucking/stumbling). I have replaced the o2 sensor and pcv valve. The problem is still there. Does anyone have any suggestions?

If it is not turning the check engine light on it won't be a sensor causing it.So you need to go back to basics,Have you replaced the fuel filter lately?it also sounds like some moisture in the fuel system,beyond that check plugs and coil ... 1993 Ford Escort 4 Door

1998 Ford Taurus, CONSTANT trouble with the rotors overheating, and causing the to warp after VERY LIMITED DRIVING!! I have had it in for trouble shooting and repairs 9 TIMES in 14 mos (???approx)

Over torqued wheels[when bolted on rotors]will do this -very important to observe wheel lug nut torque specs. ... 1998 Ford Taurus

I drove my 98 Camry 200 miles to reach home with flickering low oil light but oil was ok, got home and had checked with oil pressure gauge, pressure goes to almost 0 after 10 minutes of drive. Engine noise not too great may be little noisy then before. I have 102k miles on the car, up for timing belt change etc. Wondering if this repair is worth it if i have already done damage to the engine. Can you advise what are my options. Sem

There's a low oil level light and a low oil pressure light. You checked the real pressure and the right pressure is35PSI not more than 80 If ti revs up and the pressure doesn't rise your stopped up some way. ( sludge). If you got a little money to ... 1998 Toyota Camry

Does 1997 Ford Taurus GL have engine chain or timing belt?

Chain. ... 1997 Ford Taurus

Do i need a timing belt? - 1996 Ford Taurus

Yes for sure the answer is yes. If your car takes a timing belt then you need it or the engine will not run. Some cars take a timing chain and some can be adapted to timing gears which virtually never wear out. Unfortunatly most timing belts cannot b ... 1996 Ford Taurus

Where do I find how to repair timing belt for 1998 Ford Contour4 cyclinder?

Go to autozone.com, register for freeThen you will have a full free online repair manual for your entire car. ... 1998 Ford Contour

I need a diagram of the 2005 Ford Taurus timing belt position. My son already has the old one off and we cannot get the new one back on. I just need to see a picture of the position.

What size of motor?\015\012\015\012And you are talking about the timing belt and not the serpentine belt right? ... Ford Taurus

When need to change timing belt - 1994 Ford Taurus

Hondas Kia Acura are recommended to be change every 60,000 miles unless you have a newer model the extend to 90,000 ... 1994 Ford Taurus

Ford Taurus repair manual any free info on belts

Try a site called manuals online ... 2004 Ford Taurus
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.2643 seconds