Having problems with your 2000 Volvo S40 ?

I have kerbed my drivers side alloy and i want to kno were i can get a cheap replacement ???

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

There are companies that will repair the wheel for less, but you'll be without the wheel for about a week. maybe start looking for wrecking yards.
Repair Help & Product Troubleshooting for 2000 Volvo S40

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have kerbed my drivers side alloy and i want to kno were i can get a cheap replacement ???

There are companies that will repair the wheel for less, but you'll be without the wheel for about a week. maybe start looking for wrecking yards. ... 2000 Volvo S40

Hi - My 03 Ion wipers have just started to cause me problems. Went through an automatic car wash a few weeks ago and the driver's side wiper arm flipped up and i think got bent/broke somewhere inside during the car wash. The arm now is very loose and 'wobbly' compared to the passenger side one - I hope it just needs tightening and not an entire wiper transmission replacement. I don't want to get hosed at the repair shop so am putting it off until I get some advice. Both wipers still work, but th

I would call around to local junkyards and see if any have an 03 Ion. If so go buy the drivers wiper arm from them. At the base of the arm is a socket with serrations or splines in it. If these are rounded off, do not buy the arm, just keep looking. ... 2003 Saturn ION

I need to replace the driver's and passenger's side door speakers in my 95 Nissan Pathfinder SE-V6. Are these speakers or subwoofers? The bass runs through it, so I'm guessing their subs. They are busted to hell. I need to replace them. What size should I get. Also, if you know of cheap subs somewhere, where could I get em?

Replace the speakers with the same size/dimensions. or cheaper. rewind the coils inside. ... Nissan Pathfinder

I have a 2002 Chevy Express van. All of the tail lights work except the driver side. Left signal light and backup light works fine. Problem: The driver side brake light works as long as the running light is NOT on at the same time. They cancel each other out. With brake and running light on-they both want to use the same filament in the bulb. I have tried replacing the bulb twice-same problem. I am getting 12v to both contacts (1 at a time)in the socket. Any ideas. Thx

The printed circuit board that the bulbs push into needs replacement. Any autoparts store will have it. It just screws into tailight assembly & attaches to wiring harness. ... 2002 Chevrolet Express

Unsure what to remove to replace the daytime running light drivers side on a 2002 VW Passat. It's hard to get to and i want to do it myself. Also not getting the best gas milage on the car either. What can i do about that.

To do the dtr, you can remove the plastic cover on the power steering resivoar by reaching under it and feeling small tabs that clip onto the bracket, pull that off and you should have more room, It will take an H7 bulb, and is pretty accessable once ... 2002 Volkswagen Passat

I have a 99 dodge durango 5.2. I was told my fuel pump is on the drivers side of the truck near the second door. I was told it is too loud and is beginning to go out. When I drive the truck it does not "get up" the way it should and if I just get in the truck and go it will sometimes only go slowly until the truck catches up. I have already had the oxygen sensor replaced, so is it possible that I am loosing pressure because of the fuel pump? I also want to know if it is safe to reuse the fuel pu

Your problem could be your fuel filter, fuel pump or your fuel injectors OR TRANSMISSION FILTER. Before replacing the fuel pump, replace the fuel filter and have the injectors cleaned. You can use the fuel pump housing, but I would have the transmis ... 1999 Dodge Durango

2002 eclipse spyder heater was blowing cold on driver's side, hot on passenger's. Mechanic "fixed" it so it would blow same temp on both sides--unfortunately that would be COLD. Obviously, I don't want to go back and have them fix it again. Where is the core in this car? I can't seem to get 2 diagrams that show the same placement--or the same part. 3.0 6L model.Thermostat has been replaced, system has been flushed, don't notice any leaks, but do need to add about a pint of coolant to the ove

... 2002 Mitsubishi Eclipse Spyder

Where can I get instructions to replace a driver side review mirror on a 2002 mercury sable. It is heated with puddle light. I have the mirror and want to replace it myself.

On the inside trim, you can remove screws that are by the door handle,\015\012arm rest, under door and side of door and then gently pull back on the\015\012panel as there will also be retaining clips attached and you don't want\015\012to break them. ... 2002 Mercury Sable

Well,my driver side headlight bulb is no longer illuminating but the bright light bulb is so im driving with the brights on.I want to replace the bulb but I'm not sure if I have to replace the entire unit,cuz I cant figure out how to get to the bulb...please help

If its a caravan remove three bolts holding lense assembly in then replace bulb,re install lense ... Dodge Caravan

I have a 2004 Ford Focus ZTS. The problem I have is that the intermittent switch on the windshield wipers doesn't work anymore ( though all of the faster set speeds do work ). I was going to replace the switch ... it appears popping the wheel off won't be a problem, but my question now is that there is an air bag on the driver's side and I really don't want to get my face smashed in by it when popping the wheel off. Will I get my face smashed it, or will it not deploy when removing the wheel?

... 2004 Ford Focus

No absolutely rubbish site. ask a question and refers you to a garage which is obviously the thing i'm trying to avoid! i want to detach a mirror from the drivers side of my kia and replace it with a new one. i do not want to take the whole wing mirror off. I can but the glass just can't get the old one off!

Buy the new mirror and look at the back. these usually just snap on. you should be able to see where by looking at the new one. if not get back with me after you get the new one and tell me what you see. hope this helps more. these are usually eas ... 2004 Kia Sedona

I took out the whole headlight assembly (driver side) to replace the low beam. Is there a trick to getting it back in. It came out pretty tight and it really does not want to go back in. I did check to see if it was the ignighter or the bulb and it was the bulb and I got all that back in. Now I am just trying to get the whole assembly back into the car. Help?


Driver side door lock is jammed. I want to replace ,it seams i cant get lock out of door .lock is pressed in.Do you know of a way to get iot out

If you can open the door, then on the inside trim, you can remove screws that are by the door handle,\015\012arm rest, under door and side of door and then gently pull back on the\015\012panel as there will also be retaining clips attached and you do ... 2003 Honda Civic

PASSENGER MIRROR I AM HAVING TROUBLY REPLACING A PASSENGER SIDE MIRROR ON A 97 BREEZE . CANT SEEM TO GET THE DOOR PANEL OFF ANY HINTS???????? I had my driver side mirror ripped off and after purchasing a new part I can't seem to get the door panel off. I hear a lot of plastic making cracking sounds as I try to pry if off. Can anyone provide step by step instructions to replace the driver side mirror. Thanks....

On the inside trim, you can remove screws that are by the door handle,\015\012arm rest, under door and side of door and then gently pull back on the\015\012panel as there will also be retaining clips attached and you don't want\015\012to break them. ... 1998 Plymouth Breeze

How do I replace a low-beam headlight for a 2002 Honda Accord V6? The passenger side is easy to get to, but the drivers side has a jug right in front of the bulb.

... 2002 Honda Accord

The driver side mirror is coming off. I want to take it off until i can replace it but am having trouble getting the inside door panels off. How do go about removing the door panels?

Remove the screws around the arm rest door handle area.Then pull out from the bottom.They are held on with little plastic push retainers.If you have a window handle there is a very small metal retainer clip that looks like a horse shoe you will have ... 1996 Chevrolet Blazer

I own an Audi A6 2.5 TDI 2003 The driver side brake light is off. I want to replace the bulb but I don't know how to dismantle the tail light assembly! Could I get some help? Thank you in advance

You dont replace the strip, you replace the LED bulbs. If one goes out \012they all should be replaced. Get in your trunk and uplug the green clip \012which is the wiring harness. Push up and out and the clips will let \012loose and the part literall ... 1998 Audi A6

On drivers side how do i get sun visor cover off to replace assembly .looks like it just snaps on/off.dont want to break it,visor assembly cost me 106.00.thank you

If you mean the support where the sun visor is attached, Yes, the cover just snaps. Then you'll see a couple of screws inside. ... 2004 Ford Explorer

2005 Toyota Sienna LE Driver Side Power Sliding Door When the door is closed and latched, the motors makes noise, and the door moves the tiniest bit, but it doesn't open. The same happens in the fully open position, except of course the door doesn't close. If I use the handle to "help" the door unlatch or get started, the door will open and close and latch appropriately. IS the something I can clean, replace, etc to fix this. The dealer wants $1200.

Try this... it fixed my problem whereby the 2005 Toyota Sienna passenger sliding door would sometimes open and sometimes not, yet I could hear the motor trying to open/close it. It cost me 20 minutes and 10 drops of oil, not $1200. Fir ... 2004 Toyota Sienna

I have a driver side front xenon light (i think ....the expensive one)that is starting to shake. The dealer said it is about to go out and wanted to charge me 380.00 to replace it. what type of bulb is it and are there instructions I can find on how to install it....I can't expect it would be that difficult. I have owned jettas in the past and while they are difficult to get to it was still managable.

The n a p a can get the bulb,about 219.00 dollars,and the instalation,I don`t know ,but couldn`t be to hard,do not touch the new bulb on the glass part ... 2006 Volkswagen Touareg

How do I get to the drivers side light bulb in a 2006 Chrysler Sebring Sedan? I have the replacement bulb and want to change it myself.

I will assume you are talking about the headlight?!RemovalCAUTION: do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced life will result.1) Disconnect and isolate negative battery ... 2006 Chrysler Sebring

Front Bumper About six months ago, I had to have my front bumper replaced, thanks to a teenage driver who didn't "know I was backing up" and hit my car. Since then, whenever I park in a spot that may have a raised sidewalk or concrete barrier, my front end will scrape and pull on my bumper. Today, I didn't even realize I had parked over a concrete barrier and upon backing up, my front bumper came apart on both sides. I couldn't get on the interstate because of the flapping of the cheap bumper, s

Chances are the shop that initially replaced your bumper didn't do it right and the shoddy install left it sitting lower than it should have. Because of this, you were able to snag the bumper on the parking block. The reason you have to replace it ... 2007 Audi A4 Convertible

Need to replace broken front driver side wheel stud on 04 impala - seems like i have to remove hub to make room to push stud through? can someone confirm? if so, how do i get hub off - is it just a matter of removing the axle nut? I don't have a socket big enough to do that, so don't want to buy one unless i have to :). Also, sure would be nice to find an exploded view digram somwhere which names the various parts! thanks!

In the perfect world you are to remove the hub and bearing assembly and yes you would take the axle nut off,but when you are paid flat rate as a mechanic you must beat factory quoted time to make money,so with that said,remove the wheel after c ... 2004 Chevrolet Impala

2004 2500HD-I want to replace my driver side door mirror-how do I remove the plastic panel on the inside of the door to get to the bolts without breaking it?

Hi, this is a difficult one the problem is it does just pull of so dont be to worried about breaking it as if its going to break then its going to break, you can try placing a screwdriver about an inch down from the top then push it in about half inc ... 2004 Chevrolet Silverado 2500HD

Have a 1999 GMC Suburban. I need to replace the drivers side windshield wiper arm. I have the blades off and have the plastic cowling that runs across the bottom of the windshield loose. My problem is I can't get the plastic cowling off due to the 90 degree turn at the base off the wiper arm, then I don't know what awaits me following this. ALL HELP would be appreciated....Mrs wants her vehicle back Dareyl

Wiper arm has to be detach from pivot if u want to take cowl off,under cowl is wiper motor drive linkage that connects to pivots,now is it only wiper arm u want to change or is it some thing else?to remove wiper arm lift plastic at bottom of arm undo ... 1999 GMC Suburban
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.6793 seconds