Having problems with your 2000 Pontiac Bonneville ?

How to fix high beam switch

\015 Normal beams work but when high beam toggle is pushed it stays in the high beam position and the blue dash symbol comes on but the high beams don't go on. The low beams stay on the whole time and don't even flicker when the high beam is activated.\015 Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 2000 Pontiac Bonneville

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do i fix high beam switch? on my 94 deville when i pull back to turn on my high beam, it won't click and stays on low beam. how do i fix the dimmer switch?

On this vehicle you need to pull the steering wheel upper and lower cover apart, then you can have access to replace your switch, please get back to me with any questions, thanks!!! ... 1994 Cadillac DeVille

I have a question on my 2004 Impala what would cause the low beam headlights to be out and the high beams to only work in the FTP mode, I keep the the headlights in the ALC mode all the time and only use the headlight switch when it rains, I hear the relay switching when I pull out the switch and the DRL mode is not working also,what is need to fix it? If it's is the headlight relay how do I get to it? This just started Saturday I was able to get them to work by flashing the high beams

The low beam in a headlight is not working but high beam is\015\012working. This is because the lamp bulb\015\012or halogen lamp module has reached the end of its life, not because of any\015\012wiring problems. Low beam b ... 2004 Chevrolet Impala

I drive a 1997 Isuzu Rodeo V6 4X4. My high beam headlights work fine but my low beams went out. When the switch is turned on I only get parking lights. Is this a switch or a fuse? If it is a switch, can I buy only the switch itself instead of half the steering column? I do not have much money to fix this and would really like some help as quick as possible. Thanks, Andrew

It is either the relay or the switch. And yes, you can buy the switch only. Relay is located in power box under engine hood. Switch it out with another one like it in the panel and see if you ge the same result. If same result, replace switch. ... 1997 Isuzu Rodeo

I cant get my low beam on..my high beam stay on and when switch to low beam,it still high beam please help cause i work the graveyard shift and im sick of tire of getting pull over for something i cant fix...very grateful sokun boston

Sounds like your switch on the column is broken. It happened to me before. I didn't feel like taking the whole steering column apart so I traced the wires from the headlights and hooked up one of those old floor mount clickers. They still sell new ... 1997 Chevrolet Blazer

1998 cadillac deville. i do not have low beam headlights just high beams and daytime running lights. i replaced the high low beam relay and it did not fix it. could this just be the dimmer switch and if so where is it located on this vehicle thanks Tim

No the dimmer switch doesn't change high/low beams just interior lights. Did you try changing the bulbs? Good Luck,\012Subikid90 ... 1998 Cadillac DeVille

I have a 2007 pontiac grand prix and the low beams do not turn on. all other lights work, ie high beams tail lights ext. all fuses good and headlight switch. i pulled the fuse under the hood for the rf high beam and it killed the car. does anyone know how to fix it?

Good Evening, I have an odd question because I have seen this once before........ Have you checked the low beams themselves, like take out the bulb and look at the filament? The other thing would be to check for power to the plug in when you unplug t ... Pontiac Grand Prix

How do i fix my high beam low beam switch on my 2001 saturn l200

... 2001 Saturn L-Series

When i flick the relay switch to turn my high beams on, my headlights just shut off, but if i click it again the low beams will come back on. sometimes i can be driving and all of a sudden my headlights will just shut off and most of the time, if i click the relay switch they will come back on. how do i fix this? another thing, if i let my car sit for more than 12 hours, it won't start. why is this? by the way this is a '05 chevy monte carlo.

Good day, you are not alone on this one, replace your headlight relays and check your alternator for it maybe faulty, faulty alternator wont charge your battery. you might as well have your battery checked too for it may be too old and not accepting ... 2005 Chevrolet Monte Carlo

1999 Hyundai Elantra - Occasionally (always at the worst time) the headlights and high beams will not come on. parking lights, brakes, flashers, etc all OK. The High beam signal does not come on. Hyundae dealer just told me we could replace the multifunction switch ($467 parts/labor!) and maybe fix it. Ouch!

That is correct, the multifunction switch on the steering column is the problem on this car. ... 2000 Hyundai Elantra

My switch to turn my high beams on never worked, so i would have to hold the lever towards me as i drove. last night though, the high beams turned on and now they wont turn off. not even if i turn the car off. is there any way to fix this without disconnecting the battery every time i want to turn the lights off or spending three hundred dollars for the new part?

Well you could just buy a used steering column from a junk yard and get the switch that way instead of buying a new one,but the switch will have to be replaced ... 1999 Buick Regal

Hello im currently working on a 96 sunfire with the same problem i have high beams only on the right side passenger side is low and drivers is high plus theres no low beam or drl i fixed what i seen for corrosion thru the wires in front clip just wondering if its the switch or relay or still a bad ground

There a DRL relay up front that I think is part of your problem. If you go to the front of the car, lay underneath and look up between the rad. and the front bumper, you'll see a set of wires going to a small relay fasten to the bumper. That is the D ... 2002 Pontiac Sunfire

How to fix high beam switch

... 2000 Pontiac Bonneville

High beam 86 SR5, The high beams will not go on when the switch located within the turn signal switch system, is pushed down. The high beams work when I pull on the handle for high beam flash, so it is not the sealed beams. Just the high beam switch will not activate the high beams. Seemed to happen suddenly when cold weathe set it. Any one out there had a similar problem? Thanks

Replace the switc and also ck the hi beam relay ... 1986 Toyota 4Runner

Is there a way to make headlights work if the problem appears to be in the bcm? the car is a 2001 pont. sunfire we have been all through the wires and fixed any and all chafes back to the fire wall. at the headlight switch there appears to be power for low beams but they wont come on , they flash when placed in gear and they flash when the remote door locks and even with the alarm is activated. so the drl and low beams dont work high beams do work and i have power on all 3 headlight wires. My su

... 2001 Pontiac Sunfire

GMC truck light issue: My high beam / low beam switch is built into my blinker. To replace it costs hundreds. Currently, my lights are stuck on high beam. I would like to put them on low beam permanently and install a flip switch to turn on high beams just for state inspection. I rarely use high beam in the city. Is there an electrical schematic I can get to guide me through what wires to connect to the flip switch? Any advice is appreciated.

Well as a tech i dont recomend it but all you got to do is swap the wires on the headlamps at the bulb you will see 3 wires one is a ground the other feeds low beam the other high beam . take a test light and find the one thats hot and cut it and con ... GMC Sierra 1500

My headlights are dim after fixing a loose wire and now the high beam light is on all the time in the dash. the head light work when you switch them back and forth . replaced the headlight switch and no change. what can i do?

How headlights are electrically wired in cars becuase min turn off ... 1997 Chevrolet Blazer

My high beams weren't working on my 1994 toyota celica, and so I fixed te fuse and changed the lightbud, but now none of my headlight lights will turn on when I flip the switch, even though they'll turn on when I put power to the fuse. Is it the switch inside my car?

... 1994 Toyota Celica

1996 Nissan Pathfinder SE, low beam headlights, running lights and fog lights do not work (high beams OK). Replaced the turn signal switch and this did not fix the problem. All fuses seem to be fine.

... 1996 Nissan Pathfinder

Low beams and high beams stopped working put in new switch did not fix

... 2001 Subaru Outback

Only high beams work i have switched out low beam bulbs what else to fix this

Have you replaced the switch? ... 1992 Chevrolet K1500

The high beam headlights in my 2005 Nissan Altima have both stopped working at the same time. The low beams still work perfectly. I get indication on the dash that the high beams are working. I never use the high beams and have just found out that only one fuse controls both the high and low beams. I 'm thinking dimmer switch but would I still get indication on the dash that the high beams are on with a faulty dimmer switch?

... 2005 Nissan Altima

2005 Ford Focus ZX3 SES, the blue high beam indicator in the dash comes on with low beams, and goes off with high beams. The indicator is on at the wrong time! I have tried the following: The turn signal switch, headlight switch, the complete instrument cluster;changed these parts from a same year focus that is working correctly. Still the same. Pulled relays and swopped them also. If I pull the high beam relay the high beams go off,if I pull the low beam relay the low beams go off, if I pull t

It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, ... 2005 Ford Focus

1998 cadillac deville high beam head lights only work when you hold the switch in position i hit the high beam switch and the high beams come on, but as soon as I let go of the switch the headlights go back to low beam.

Classic switch problem. Replace your switch and this will fix your problem. ... 1998 Cadillac DeVille

High beam switch not click to high beam, have low beam but when I want to switch to high beam lever does not click to high beam

... 1992 Oldsmobile Cutlass Supreme

As I'm driving at night with my low beams on, they will just automatically (without me clicking the switch) switch to the high beam setting and back and forth between low and high beam setting...s

Indeed, Im having the same problem.. mine is a Hyundai Accent 2005.. Turn on the light "low beam setting" but High beam come on by itself, even if I try to adjust from High to Low.. High beam stays on by itself.. from reading these posts, sounds like ... 1999 Hyundai Accent
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.6065 seconds