Having problems with your 2000 Ford Crown Victoria ?

2000 Ford Crown Victoria (police pkg) wont start?

\015 About a week ago my check engine light came on after getting a full tune-up(plugs, fuel filter, oil change, new battery & cables ) etc. I noticed that the car started puttering, stalling, and generally having a hard time accelerating up in speed when I press on the gas. I also noticed that once I press the gas pass 50-60 mph the check engine light would start blinking on and off rapidly while pressing the gas then it would stop. Now the car will not start. I've eliminated the starter, alternator, and relays so now Im almost positive its something with the fuel delivery sytem (injectors or fuel pump). Does anyone know what the problem could be?\015 Posted / edited by AnonymousUser on : 15-01-2018

Answers :

The first thing you need to do is have the computer scanned for trouble codes to narrow down the possible causes. But that would require a code reader or scanner.
Have you checked fuel pressure with a gauge ? Are you getting spark to the plugs ? Because of the moan from the pump, there's a good chance the pump has failed.
Repair Help & Product Troubleshooting for 2000 Ford Crown Victoria

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

2000 Ford Crown Victoria (police pkg) wont start?


The first thing you need to do is have the computer scanned for trouble codes to narrow down the possible causes. But that would require a code reader or scanner. Have you checked fuel pressure with a gauge ? Are you getting spark to the plug ... 2000 Ford Crown Victoria

I have a 1996 Ford Crown Victoria and it wont start. The power is on and the battery is not dead. Why wont my 1996 Ford Crown Victoria crank up?


Check your starter also check fuse ... 1996 Ford Crown Victoria

Crown victoria wont start - 2008 Ford Crown Victoria


... 2008 Ford Crown Victoria

1985 crown victoria wont start - 1985 Ford Crown Victoria


You'll have to figureout if it is a fuel or ignition problem.Have you checked for trouble codes, does it have spark at the coil, and can you see fuel spray at the injectors ? ... 1985 Ford Crown Victoria

2001 crown victoria cranks but wont start - 2001 Ford Crown Victoria


... 2001 Ford Crown Victoria

My 1997 ford crown victoria wont fire but will crank just wont start check fuel filter an relays an fuses an im stumped


... 1997 Ford Crown Victoria

My 1996 ford crown victoria starts sometimes sometimes it dont, when it wont start the spark plugs are not firing


I would change crank shaft censor ... 1996 Ford Crown Victoria

04 crown victoria police car wont start after crash


... 2000 Ford Crown Victoria

My 1987 ford crown victoria wont start. the battery died i replaced it. i replaced the distributor. i replaced the relay fuses. its still not getting a spark. what else cud be wrong?


... 1987 Ford Crown Victoria

Need 2006 ford Crown Victoria Police Interceptor fuse diagram. Cant find a owners manual. My windshield wipers wont stop even when its turned off. Need to check the fuse. Someone please help. Thanks


... Cars & Trucks

Engine tuns over but wont start - 2001 Ford Crown Victoria


Could be fuel or ignition related. If you are mechanically inclined, check for fuel pressure at the fuel rail by depressing the Schrader valve with a small screwdriver. If you have fuel pressure there you have an ignition problem and could be a varie ... 2001 Ford Crown Victoria

Car wont start no fuel where is the fuel shutoff switch located on 1999 crown victoria police interceptor


It is located in the trunk, left hand side. There should be a small hole in carpet, look for a red button and push it. Hope this helps. ... 2001 Ford Crown Victoria

Wont start no fire from coil pack - 1990 Ford LTD Crown Victoria


Check blown fuses,bad fuse link cables,relays and take the ignition module to an autozone to tested, ... 1990 Ford LTD Crown Victoria

So this is my problem....i own a 2004 crown victoria unmarked police unit. it all started when the check engine light came on. i got the code, it said something about the spark plugs. i changed all 8 with ford motorcraft sparlplugs. cylinders 3 and 4 both have oil on them. after cleaning them the oil always ends up back in them turning the check engine light back on. do i need a new head gasket or valve cover gasket...pcv i mean what??? some one help!!! engine misfires obviously


Are you sure its oil? Ford claims to have had the intake manifold problem fixed in '02, but that is pure garbage. Leaking (cracked) intake manifold or a bad intake gasket allow coolant to meander its way into the spark plug holes and snuffs out the s ... 2003 Ford Crown Victoria

I have a 2001 ford crown victoria that wont start after it get wet


Need new rotor and new oil and wires and plugs ... 2001 Ford Crown Victoria

Wont start just clicks - 1996 Ford Crown Victoria


Thanks for choosing FixYa and welcome to the site. You need to make sure the battery is good and holding a charge. Make sure the terminals are cleaned and tight. Check you wires and make sure they are not damaged from the ba ... 1996 Ford Crown Victoria

1996 Ford crown Victoria police interceptor tail lights wont turn on all other lights work


Have you traced the wires from the tail light forward? ... 1996 Ford Crown Victoria

Wont start - 1996 Ford Crown Victoria


Does it crank? ... 1996 Ford Crown Victoria

My car starts but wont turn over - 1992 Ford Crown Victoria


U might not have gas or full line felter is closd and see if you full pump is working befor you start the car see iif u her a humm from the full tank have sam one stand by the full tank jest tern the key to jest befor start and see if you her that ... 1992 Ford Crown Victoria

03 Crown Victoria police interceptor brake lights on but dont flash when turn signal is flipped and keeps blowing fuses. also car starts but wont go into any gear.


... 2003 Ford Crown Victoria

My 2000 ford crown vic wont start it cranks fine but wont start.....i started it and the check engin light was on so i took my code reader and erased the code and now it wont start i need help fast please help


... 2000 Ford Crown Victoria

2007 ford crown victoria wipers wont work - Crown Victoria Ford Cars & Trucks


Recently ha one where a wire was burnt in the harness at the front of the right front frame rail. Look for a green powder coming out of the harness. ... Ford Crown Victoria

2000 crown victoria wont start


In my opinion this is most likely related to wiring. To clarify have you checked at the solenoid with a multimeter to see if power is travelling to it when the ignition switch is turned on? ... 2000 Ford Crown Victoria

I have a 1989 crown victoria and i have a small battery on it does it matter the size of the battery, because sometimes it starts and when i' am driving it for a while then shut it off and then try to start the car it wont i crank it and crank it and it wont start but then i wait 4 about 4 to 5 minutes and then it starts it has 111k miles on it can someone help me please is it the battery also i can smell a little antifreeze but no leaks help!!!!!!!!!!!!!!!!!please.


The smaller battery could be over charging unless picked up by the voltage regulator, and heat is a slow killer. Cars require different amps to start. The main thing to look at is the Cold Cranking Amps. Which is the amps being put out at 0F or -18c. ... 1989 Ford Crown Victoria

Crown victoria cranks but won't start - 2001 Ford Crown Victoria


... 2001 Ford Crown Victoria
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.4575 seconds