Having problems with your 1999 Pontiac Sunfire ?

CRUISE CONTROL ON TURN SIGNAL GEAR DOES NOT ENGAGE

\015 The car is a 1999 Pontiac Sunfure and the cruise control button is on the turn sign gear/wand. It does not engage when the button is pressed. Is there a reset button or an easy inexpensive fix? Thank you.\015 Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Check vacumn to the cruise module. There may be a three port valve that is leaking.
Repair Help & Product Troubleshooting for 1999 Pontiac Sunfire

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

CRUISE CONTROL ON TURN SIGNAL GEAR DOES NOT ENGAGE


Check vacumn to the cruise module. There may be a three port valve that is leaking. ... 1999 Pontiac Sunfire

On my 2005 GMC Canyon the right turn signal light on the dash will suddenly come on while I am driving down the highway. Also when I apply the breaks the right turn signal light on the dash will come on and if I have the cruise control engaged and turn on the right turn signal the cruise control will disengage before I have applied the breaks. What's going on?


You have a short in your swithch needs to be replaced pobably a dealer itemif it helps please give me thumbs up ... GMC Canyon

I have had difficulty getting trailer wiring to work correctly. I have either running lights or brake or turn signals. If the headlights are on in the vehicle, there are no brake,and turn signal. after the mechanic worked on this issue (unresolved) I find that if I engage a turn signal on the vehicle (not towing anything) the cruise control is disengaged. Help


Try http://www.etrailer.com/faq-wiring.aspx. This should help. ... 2007 Mitsubishi Outlander XLS

2001 HYANDAI ELENTRA car was stuck in 3rd gear changed turn signal fuse was blown changed fuse work fine for a short time then then fuse blowed again then trans stop shiftinh again i changed the output speed sensor,input speed sensor,range selector,vechile speed sensor.problem was still there unplug the cruise control the car shifted great for a day the it started blowing the turn signal fuse again and stayed in third gear.any ideal whats wrong?


I would suspect you have a short in the wiring to the transmission or the shift solenoid inside the ****** is shorted. Only way to know for sure is to get the wiring diagrams and trace down and inspect all the wiring that the fuse powers. ... 2000 Hyundai Elantra

I have a 2000 VW Passat. Recently, my cruise control has been acting up. It will engage but shut off every time I turn on my left turn signal or my brights. However, three days ago, it stopped working without me touching it and has not worked since. I have not checked the fuse box. Any ideas on how to fix it?


Check the wiring harness, especially the one that goes underneath the dashboard and steering column. There may be bad wires or loose connections that may have caused your cruise control to act up when turning on the signals or the brights. If that ... 2000 Volkswagen Passat 4Motion

Cruise control my 2002 x type does this as well. every time i use cruise control the car pops out of gear when i turn the cruise control off. then i have to stop and turn the car off. once restarted the car will go into gear. hope someone comes up with something


This is happening because once you shut it off you are sending an electronic signal to transmission and it resets itself once car starts back up as if something inside the ecm has been reprogrammed and erased alll over again. the ecm is your brain w ... 2004 Jaguar S Type

I have a 2003 Chevy silverado 3500 dually. When I press the brake the right turn dignal on the dash comes on. When I have the cruise control is on and I turn on the right turn signal, it turns off the cruise control. I have replaced the turn signal indicator which I was told was the problem but it persists.


... 2003 Chevrolet Silverado 3500

Tail lights don't work right on my 1995 gmc pick up all lights work in reverse no hazard lights no left turn signal right turn signal works right side brake light comes on when you turn on the cruise control when cruise control switch is on off no tail lights at all just head lights


... 1995 GMC Sierra C1500

Chevy 2003 duramax, right turn signal only works sometimes, and when in cruise control mode, using right turn signal kicks cruise out! Any solutions?


... Chevrolet 2500

Cruise Control on 2 door Sport 4x4 with SOHC: Non-working cruise control. When turned on, cruise control does not engage, no dash light indication either.


Trade it in for a honda ... 1999 Ford Explorer

86'Gmc Suburban, when the headlights are turned on the left turn signal will not work, durning the daylight hours when engaged all lights flash as if you had the 4way flashers on. I've replaced the headlight switch,all the bulbs,fuses,my only other thought is that the turn signal harness needs replaced,but can't find a new one that has windshield,high beam controls as well as the signal controls all combinded in the harness.


Have u repaced the turn switch they have had a lot or problems in the past if it is the harness usually the problems in the steering column ... 1986 GMC Suburban

Ford 1998 F-150. Brakes overhauled 6 mos. ago. Hwy/City driving percentage: 90/10. I was driving on the freeway this morning, cruise control on, when the abs and brake light lit suddenly. I tapped my brake pedal to disengage the cruise, but the play was soft & and the pressure did not engage the brakes nor turn off the cruise. I turned off the cruise manually, and attempted a full press on the brake pedal to engage the manual brakes. This did work, but pressed to the floor, braking was


With the sudden loss in brake pressure, and the light on, I would check the fluid level and if its low, suspect a brake fluid leak, that may be the burning smell, maybe leaking near a exhaust pipe? You dont mention where you are, but if its NORTH and ... 1998 Ford F150 Regular Cab

All at once, the turn signals started to flash fast, Now I know that normally means a bulb is out. But when the turn signal, either one is turned on, the driving lights flash oppiste of both signals and I get nothing from the the rear tail lights or signals, noting comes on in the rear. Also it seems to have caused the cruise control to also stop working. 1999 corvette convertible. Please help.


Ouch! I suspect a problem with the turn-signal lever wiring, either in the steering column or the turn-signal lever itself. There may be a broken wire to the back lights shorting to the driving lights. What happens if you have your foot on the brake ... 1999 Chevrolet Corvette

Cruise control not working suddenly. I had the brake light switch replaced a few weeks ago because the gear was stuck in park. Sometime after this the cruise stopped working, but I can't really say it was immediately after because I didn't notice. I had the mechanic who replaced the switch check it again to make sure the wires were hooked up and he said it was. The cruise light does not come on within the pushbutton switch nor does the cruise control engage with the wheel controls. The


The speed sensor is going bad. Check and replace this part first. If it still does not come on after you replace the speed sensor then you will need to replace the cruise control module ... Honda Pilot

All lights work and brake light at top works. brake lights on bottom left and right don't work. It was hook up to trailer wires connection. going down the road and when you turn on the right turn signal the cruise control would go off. the brake lights would come on but the right turn signal would stop working. as soon as you let off the brakes the turn signal would work again. I took the trailer connections off and replaced brake fuse and they still don't work.


Check a few things...\015\012- The bulbs\015\012- Check for ground at brake lamp connectors\015\012- Check your wiring at the connectors for power\015\012- Check for another fuse blown \015\012- Do not hook up the traile ... 2000 GMC Safari

I have a turn signal control lever part # 26100837, i need to know if this will fit my 2001 Denali.Mine has everything on this lever. Wipers,turn signal,washer,cruise control.


Maybe? the older trucks you just pull on it and it should come out. But the cruise wires will need to be connected. ... 2001 GMC Denali

The reverse gear does not engage but all the forward gears work, I set the cruise control at 80kms and the speed just takes off, after shutting off the cruise control the reverse starts to work no problem, let the car sit for a day or two same thing, no reverse, why and what is the problem?


... Dodge Intrepid

Cruise Control The cruise control will not engage until the engine reaches full operating temperature. If I try it too early it will not engage until the car has been turned off and restarted.


There is a vacuum silinoid that controls the vacuum being applied to the cruise control actuator it might be defective ... 1999 Oldsmobile Intrigue

When engaging cruise control the light turns on but the cruise control does not engage.


... 2007 Chevrolet Tahoe

Cruise control My cruise control sometimes works and sometimes won't engage. Even when it does come on, it will suddenly stop a while later, and occasionally it doesn't engage initially but then does a few minutes later when i haven't even touched it! If it's working and i have to slow down, it won't reactivate. I checked for fuses but it obviously isn't that since it works some of the time. The only sign leading up to this was for months it seemed to hesitate when i turned it on, but it always


I had this problem and fixed it. The switch on the brake pedal was slightly off adjustment and was detecting as though the brake was always on, disengaging the cruise control. I pulled it apart and put it back together and made sure it was working ... 1998 Plymouth Grand Voyager

I need to change the turn signal switch box in a 1998 Monte Carlo. How do I go about removing the turn signal and switch box. This vehicle has cruise control on the turn signal lever


Disconnet the battery\015\012remove the air bag\015\012remove the the steering wheel center nut\015\012pull wheel off with a wheel puller\015\012remover the retainer off the steering wheel's lock plate with a compression lock ... Chevrolet Monte Carlo

Turning Signals keep blowing and signals cancel cruise control.


Sounds to me that the turn signal switch is bad and will have to be replaced. If you could wiggel it around and get them to work tells me that is wear the problem is. ... 2005 Chevrolet Cavalier

Exterior signal lights all work incorrectly in my 2005 yukon. All the bulbs light up but not correctly when using break or turn signals. The turn signals all blink whenever I try to signal either direction. The hazard lights illuminate when I break. The cruise control doesn't work when headlights are on, and reverse lights don't work at all.


Sensor relay get it tested ... 2005 GMC Yukon

Parking Brake Light won't turn off, Cruise Control won't engage


... Ford Cars & Trucks

92 bonneville turn signal/lever mechanism broke, I bought turn signal parts for over 120.00 now and still havent got the right part. the turn signal shaft/ cruise control lever fits inside of this part and apparently goes by another name. I bought a chilton manual and it tells me nothing. can you name this peice?


... 1992 Pontiac Bonneville
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.6903 seconds