Having problems with your 1999 Mercury Sable ?

99 sable oil pan removal I need an answer. - 1999 Mercury Sable

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 1999 Mercury Sable

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

99 sable oil pan removal I need an answer. - 1999 Mercury Sable

... 1999 Mercury Sable

The Oil light came on on my 1996 Mercury Sable I changed the Sending unit but that didn't help so I was told that it may be the oil pump I pulled the oil pan off, and removed the oil pump. I tore

Have you checked if the fault is your oil filter,probably the filter pressure valve inside doesn't keep any pressure? or the other thing is a possibility of the pressure pipes are clogged or semi clogged. ... 1996 Mercury Sable

I need to replace the oil pan gasket on my 2000 pontiac montana. i was able to remove 10 bolts from the top of the oil pan, but noticed some larger bolts on the sides of the oil pan (4 total). do those need to be removed as well? Is this a project that someone with little auto repair experience (oil changes, brake replacements, etc) would be able to do?

Yes,remove those bolts as well,the way I always approach a job like that,which I've done hundreds is always better to take off more than not enough,just look around the oil pan and look at the gasket and see how many bolt holes it has,that should ans ... 2000 Pontiac Montana

99 sable dohc 3.0l oil pan removal. - 1999 Mercury Sable

... 1999 Mercury Sable

We need to replace an oil pan on a 2002 ford windstar. we need to know if the engine has to be removed or not. Can you please answer this for me?

The engine does NOT have to be removed. the proccess is done from underneath the vehicle and requires the removal of the exhaust pipe that runs accross the oil pan. not a very fun job to do in the driveway. ... 2002 Ford Windstar Cargo

I have a 1997 Plymouth Voyager with a 3.0L engine. I am trying to replace the oil pan gasket. The literature says I need to remove the front motor mount bracket, bending braces and torque converter dust shield in order to remove the oil pan. It seems the brackets and braces use a strangely sized socket. I am also worried about having the engine fall on me when these brackets and braces are removed. What size of sockets do I need to use and where can I find them? Do I need to support the en

... 1997 Plymouth Voyager

Removed all 10 mm bolts and oil pan will not move do the bolts on the side of the oil pan need to be removed before removing the oil pan

3.1 engine also has bolts in the side that fasten the pan to the main caps ... 1994 Pontiac Grand Am

Have 2004 mercury sable ls, supposedly according to manuals there is a drain plug for both the oil and transmission pan ( both of which need filters and seals) this thing even come with a drain plug? My Controls for heat and A/C keep failing to work properly ( cold in morning so turn on heat but later it will not turn off or go down when it's hot out.)

... 2004 Mercury Sable

I have a 1989 honda accord dx with a oil pan gasket leak and a rear main seal leak, in order to fix the rear main seal leak, does the oil pan and the oil pan gasket need to be removed and does the gasket need to be replaced

They don't use gaskets on oil sumps its sealant glue and yes u will have to reapply it when you put the sump back on, and what do u mean by main seal? do you mean the head gasket? ... 1989 Honda Accord 4 Door

Removed oil pan bolts and it seems the trans axle housing is keeping the oil pan from coming off in the rear, do I need to unbolt the trans axle from the block to remove oil pan?

To get the oilpan off a 1994 Accord, you'll need to unbolt the downpipe from the header, unbolt the brace holding the downpipe to the block, and remove the exhaust hangers from near the PS rack. This will allow you do drop the downpipe out of the wa ... 1994 Honda Accord

I need to remove the oil pan from my 2002 chevy express van with the 4.3 liter motorI have removed the stater and the trans line and the pan bolts. the oil pan should be free but it appears to have dowl pins in the trans housing?

Try pulling the bell housing off the tranny i think theres two bolts back there ... 2002 Chevrolet Express

I have a 1996 chrysler cirrus 2.4 liter dohc 4 cylinder engine that needs the oil pan replaced. i have removed all things but the lower engine support because even after all bolts were removed the mount will not. the mount is the only thing left in my way of the oil pan removal

You need to hold the engine on a trolley jack by lifting it on the oil pan itself to then undo the engine mount. Once the mount is removed lower the jack, remove the remaining pan bolts and then remove the pan proper. Refitting is a matter of fittin ... Chrysler Cirrus

How do you remove the oil pan on a 1991 mercury capri

... 1991 Mercury Capri

OIL PAN we can't figure out how to remove the oil pan. We can't reach a few of the bolts.....is there a special tool that I need to remove the bolts that I can't seem to get too? If not any suggestions? Thanks

You may need to use smaller-drive sockets (like a 1/4" with a swivel) to reach the tough ones. Sometimes they're obstructed by parts that can be removed as well - you should look to see if anything that is blocking bolt access is removable or adjust ... 2003 Suzuki Aerio

How to remove the oil pan on 2004 Honda Pilot 3.5 liters. Does the subframe need to be remove to replace the engine oil pan?

... Honda Pilot

Trying to remove the oil pan of 2006 Civic EX to weld a hole caused by debris. All bolts out except near oil filter/AC compressor mount. Now I'm stuck, can't figure out how to remove those and get to last couple of pan bolts.Assuming I need to get tension off of serpentine and maybe loosen AC compressor...but stumped at the moment. Boy would I love a diagram or two!

It is shown on a decal under the hood. If your decal is gone here is the link for the routing.\015\012http://www.gates.com/common/part_ ... 2006 Honda Civic Hybrid

Trying to drop the oil pan out of my 1994 Ford F-150 (4.9L) to replace the gasket. Ive taken out the motor mounts and jacked the engine almost high enough to get the oil pan out and I am wondering if i need to drop the oil pump into the pan or remove the transmission to get it out or if this is necessary?

Done this on several i-6 f-150s. slide back or remove transmission, remove motor mount bolts from frame(not motor), jack motor up as far as possible without damaging egr valve or wiper motor when they hit, shim under motor mounts so that when you dro ... Ford F-150

I have a leak that appears to be right under the oil filter..It is not a oil pan gasket leak. What I need to know is????? Can you fix that type of problem without removing the oil from the oil pan.


Oil Filter I have a 2007 Saturn Vue Hybrid and I think I located the black housing where the filter is inside. How do I remove the housing and is this going to be a real messy job? Won't the oil be hot even after I drained the oil from the oil pan? What tools do I need if any to remove the filter? Also, do you know where I can find a good repair manual for this vehicle? Thanks

First which engine do you have? If you have the Ecotec 2.4 4 cylinder you should be able to use a 32 millimeter socket with an extension. Some oil will run off of the filter but should not be real hot. Drain all of the oil from the eng ... 2008 Saturn Vue Hybrid

I need to replace the oil pan gasket in my 2002 jeep liberty because it is leaking.How do I change it? Do I need to remove the engine or can I change it with the engine in place?Do I need to remove the cross bars etc.

... 2002 Jeep Liberty

Removal of canister oil filter on 2006 Mercury Milan What tool is needed in the removal of the canister oil filter other than the allen wrench to remove the plug?

... 2006 Mercury Milan

I had asked about the check oil light coming on and going off on my 2004 buick lesabre, the person mentioned a sensor in the oil pan. Can this be checked out by finding a dianostic code or does the oil pan need to be removed?

I know nothing of a sensor in the oil pan. What you need to check is the oil pressure sending unit. The unit will look like this.\012\012Check the connect ... 2004 Buick LeSabre

Hi, hope you can help me on this, I got a 1967 mustang, I recently change the fmx tranny for a c4, but I remove the c4 from a mustang II with the small bellhousing (141 tooth), now the problem I have its that the starter hits the oil pan, so I need a smaller starter. I got a mini starter, second hand, from a friend, but It didnt work. So my options are: 1- Get a mini starter that works (If you know anyone, will appreciate the info) 2- Modifying the oil pan 3- Changing the bellhousing, but will h


I need to remove oil pan on 2000 vw passat wagon i need to inspect screen on oil pick up tube

... 2001 Volkswagen new Passat

1987 ford inline 6 cylinder oil pan removal proceedure I have a 1987 ford 1/2 ton truck and need to replace the oil pan what is the proceedure

... 1987 Ford F 150
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.2431 seconds