Having problems with your 1999 Chrysler 300M ?

Ignition coil pack on 1999 chrysler - 1999 Chrysler 300M

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for 1999 Chrysler 300M

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Ignition coil pack on 1999 chrysler - 1999 Chrysler 300M

... 1999 Chrysler 300M

I have a 92, 6- Cylinder Chrysler 300M. Error codes say misfire is #5 Cyl, and "E" Coil Pack(=#5 coil). Have changed #5 coil and all plugs. The catylitic converter on psgr side is getting red hot, I was told that means it's still working (for now). Car is running very rough at all times, and has now developed a loud knock which seems to be coming from cyl 5 using a piece of hose to listen. 3 mechanics have 3 diff guesses. I am thinking of changing the injector next. It's at another shop rite now

Sounds like a lean misfire. The injector may be clogged or defective causing the cylinder to run very hot. A compressoin test is a good idea in case the exhaust valve is burning up. Hope it turns out OK, Don T ... 2008 Chrysler 300

How change ignition coils 2001 crhysler 300m - 2000 Chrysler 300M

... 2000 Chrysler 300M

How change ignition coils 2001 crhysler 300m - 2000 Chrysler 300M

... 2000 Chrysler 300M

My 6a12tt is not getting any spark to the coil pack from the twin plug igniter pack, replaced igniter pack with a second hand one and ran fine for a bit and then lost power to coil again, droping cylinders. What would be causing igniter pack to stuff out?????????


2001 chrysler 300m coil packs not fireing

Could be your module, your coil packs, a blown ecm fuse or bad computer in your vehicle. Also may be the map/maf sensor that gets info from the brain box. You have 2 computers. A body computer and an electronic computer. The ECM may be bad but I doub ... 2001 Chrysler 300M

2007 Chrysler town and country. originally had a p0202 code which the dealer said was an ignition coil pack. Replaced ot and two weeks later the engine light comes back and it's a p0303 and the

It could be the system utility of the car computer its protecting,the car ,if you have a friend or somebody lets you borrow a compu and check to verify its not the computer,start to send you codes,you just said after fix one another comes out,sometim ... 2007 Chrysler Town & Country LX New Cars

1995 Chrysler starts up fine but after driving it and shutting off ignition, it will not restart until it has set for about an hour I have replaced the water pump, upper intake gasket, front left injector, spark plugs and the coil pack. It is still doing the same thing

Does it happen when its damp outside? I have that problem and I had a friend hotwire the computer with a small roach clip. My car will actually die while it is running if damp and not even start with a jump..with the roach clip thing, you just have s ... 1995 Chrysler LHS

I have chrysler 300m and i have p0356 ignition coil f primary secondary circuit maulfunction how can i fix this problem

Remove and Replace the Electronic Ignition Coil Pack. ... 2002 Chrysler 300M

My 2000. Chrysler. 300M. Is still misfiring. After changing all ignition coils and spark plugs, what a possibl solution

Did you have the ignition controll module checked? It is what the coils strap to. If part of it is bad it will cause a misfire. You can remove it take it to your local parts stor and have them check it for you. \015\012Good luck! ... 2000 Chrysler 300M

Car hesitating 2004 Chev. Cav. when i start my car, the engine light blinks and the car putters. When I drive, i smell gas and the car sucks gas bad!! I have changed the ALL the parts that have to do with the spark plugs, includ. the coil pack and boots, spark plugs, the silver ignition piece on top of the coil pack. That silver ignition piece on top of the coil pack screws into the top of the piece that goes over where the cap to the spark plugs go- I changed that and the car worked fine for ab

It might be a long shot, but i have a 04 cavalier and i once smelled gas and had a putter issue. Turns out the fuel pressure regulator basically sits on the fuel rail with one screw on the side. Over time, the regulator either goes bad or becomes u ... 2004 Chevrolet Cavalier

Have a 95 Chrysler Lhs was driving on eway bout 70mph and it just died. got it home check for fuel,(use starting fluid) fuel pump turns on. still no start. check for spark at the plugs no spark, checked spark at the coil pack no spark. im think coil pack went bad? is there any thing that would stop the coil pack from sending spark other than it self. theres not a crank censer that feeds the coil pack is there. what do u think i cant afford to pay as i prob. solve. thanks in advance for ur help i

... 1995 Chrysler LHS

No voltage to the ignition coils on a 2.7L 2000 Chrysler Concorde engine. There is voltage when the starter is turning , but no voltage to coils when ignition key is just turned to on position. Car will not start..The automobile is a 2000 Chrysler Concorde with a 2.7 L engine.

Ignition switch or chip in key faulty ... 2000 Chrysler Concorde

2001 Town & Country. No spark. Have codes 0351, 0352, 0353, 1193. Checked coil pack wire harness. With engine ignition in the starting mode 9.85 volts. Replaced coil pack and crank sensor, still no spark. Fuel line has pressure and I can hear fuel pump when I turn on ignition. Confused and considering getting rid of van, Help!

Hello and welcome to FixYa!\015\012\015\012As a first course of action, I strongly suggest that you remove the positive battery connector and let it sit for atleast 5mins. before reconnecting. This will reset the system and may get it back to i ... 2001 Chrysler Town & Country

Ignition coils purchased 6 new igniton coils for my 20001 audi allroad quatro 2.7t. replaced all 6 with the new ones and got multiple misfires. open it back up and none of the coil packs are getting a good connection with the coil boots. the old ignition coils would snap together tightly these new ones dont snap together at all and are easily pulled apart causing misfires. what am i missing here? the new coils are OEM.

Check the number on the coils the part numbers should match, Did you order them off the VIN? You may have the wrong coils. Re check with dealer ... Cars & Trucks

1993 buick park avenue ignition spark issue.....my car will not fire on the lowest coil in the coil pack. i have changed the coils and also moved them around to ensure not a faulty coil. i just put an ignition control module on and the problem has no change. i can not get the coil to spark, cheked the wiering as best as possible. my car is running on 4 cylinders and no check engine light is coming on. i am a good mechanic...but no thoughts...do you have any?

The problem has to be wireing.checking with an ohm meter will not tell you for sure how much current the wier will carry so you need need to find where it starts and ends and disconnect bothe ends.put a jumper to ground in one end then hook a test li ... 1993 Buick Park Avenue

Power tr. pack is the one supplying voltage to the three ignition coil( oc1,oc2 & oc3 socket ). Each coil supplying two spark plug. Oc2 is not functioning to the # 2 coil. There is another socket of the power tr that compose of six wirings, they are VB, TACHO, GND,IB1, IB2 & IB3. May be ib1, 2 , 3 are controlled by engine timing sensor to trigger the power tr pack. My problem is where I can fine the said sensors.

Yes all three coils are powered by the same fuse those cars made for the United States Have Distrubutors until 2003 and then they have a coil for each cylinder. Coil Pac systems on cars that use them use the same sensers and pickups to fire all thre ... 2000 Mitsubishi Galant

My 2004 chrysler town & country is not firing on #1 & #4 on coil pack. I replaced coil pack twice because i thought i had a bad one and it is still missing on those two cylinders. Both coils were new that i replaced. Im thinking its the pcm or crank sensor but the car starts and run.

... 2004 Chrysler Town & Country

1991 buick lasabre limited wont start i replaced ignition module coil pack ignition module is running a constant 12 volt on each post crank sensor good battery good gas full

... 1991 Buick LeSabre

I was driving in my 1985 toyota 4x4 pickup when it stopped running, as i was still in gear and coasting it fired again and ran for a few more minutes the died for good.i installed a new coil and ignition pack and rotor but i still have no fire thru the distributor cap. itested the 2 wires that come out of the cap and run back into the ignition pack and there is no electricity, should there be some juice in those wires? all my fuses test good so i don't know what else to try.r22 motor if that hel


My sons 2002 Intrepid wont start after it rains or it is real humid at night. I found a bare coil pack wire and a gound wire behind the coil pack bare for about 2 inches. I wrapped them in electrial tape. Do you think that could have been the problem ? He has had a new ignition switch and a couple other sensors replaced and still has the problem.

... 2002 Dodge Intrepid

3.8 L engine missing spark on cylinders one and four. Changed ignition coil pack, but still missing spark on one and four. The ignition module is directly below coils - could that be he problem? The car started missing suddenly.

Most likely it is the ignition module ... 1988 Oldsmobile Delta 88

Removing ignition lock on 1999 chrysler 300m - 300M Chrysler Cars & Trucks

... Chrysler 300M

Hi, I get a P0305 diagnostic code on my 2002 Dodge Grand Caravan with 3.3L flex fuel engine. It has been running just a little rough intermittently for a couple of weeks. Today it started getting worse. Previously I had changed out the ignition coil pack due to arcing from the coil pack to the metal bracket that holds the Power Steering Fluid Reservoir. Any ideas? Thanks!

It is a miss fire on number 5,it could be a bad spark plug,or boot on the coil to spark plug,do a spark plug change out . ... 2002 Dodge Grand Caravan

1996 dodge avenger. 2.0 engine. While driving the car stalled. After I got it home I started checking, and it had dropped 2 cylinders as far as ignition. Both coil packs are good. Someone had suggested replacing the cam sensor. No good. From what I can find, the crankshaft sensor could be a culprit in NO Spark but not dropping one coil pack. Is this true? I am tending toward a bad ecm/dcm computer. Steve

1. Yes, it's true that the crankshaft sensor could be a culprit in NO spark, but not dropping one coil pack. \015\0122. Of course, could be a bad Engine Control Module (ECM). If you can find another one in good condition, test the eng ... Dodge Avenger
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.9086 seconds